GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 16881-2008 |
CoagulaTIon-Deposition jar test of water 水的混凝、沉淀试杯试验方法 |
China National Standards TI |
English PDF |
GB/T 15337-2008 |
General rules for atomic absorpTIon spectrometric analysis 原子吸收光谱分析法通则 |
China National Standards TI |
English PDF |
GB/T 14832-2008 |
Test methods for compaTIbility between hydraulic fluids and standard elastomeric materials 标准弹性体材料与液压液体的相容性试验 |
China National Standards TI |
English PDF |
GB/T 13893-2008 |
Paints and varnishes - DeterminaTIon of resistnace to humidity - Continuous condensation 色漆和清漆 耐湿性的测定 连续冷凝法 |
China National Standards TI |
English PDF |
GB/T 13248-2008 |
Rubber and rubber laTIces - Determination of manganese content - Sodium periodate photometric methodes 橡胶和胶乳 锰含量的测定 高碘酸钠光度法 |
China National Standards TI |
English PDF |
GB/T 12830-2008 |
Rubber,vulcanized or thermoplasTIc - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法 |
China National Standards TI |
English PDF |
GB/T 1192-2008 |
Techincal specificaTIon of agricultural tyres 农业轮胎技术条件 |
China National Standards TI |
English PDF |
GB/T 11501-2008 |
Photography - Density Measurement - Part 3:Spectral CondiTIons 摄影 密度测量 第3部分:光谱条件 |
China National Standards TI |
English PDF |
GB/T 10707-2008 |
Rubber - DeterminaTIon of the burning 橡胶燃烧性能的测定 |
China National Standards TI |
English PDF |
GB/T 970.2-2008 |
Circular screwing dies - Part 2: Technical specificaTIons 圆板牙 第2部分:技术条件 |
China National Standards TI |
English PDF |
GB/T 9487-2008 |
Diesel engines - Exhaust gas measurement under free acceleraTIon 柴油机自由加速排气烟度的测量方法 |
China National Standards TI |
English PDF |
GB/T 9258.2-2008 |
Coated abrasives - Grain size analysis - Part 2: DeterminaTIon of grain size distribution of macrogrits P12 to P220 涂附磨具用磨料 粒度分析 第2部分:粗磨粒P12~P220粒度组成的测定 |
China National Standards TI |
English PDF |
GB/T 8498-2008 |
Earth-moving machinery - Basic type - IdenTIfication and terms and definitions 土方机械 基本类型 识别、术语和定义 |
China National Standards TI |
English PDF |
GB/T 725-2008 |
Internal combusTIon engines - Nomenclature and code of designations 内燃机产品名称和型号编制规则 |
China National Standards TI |
English PDF |
GB/T 7121.1-2008 |
The strength tesTIng method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法 |
China National Standards TI |
English PDF |
GB/T 5862-2008 |
Agricultural tractors and machinery - General purpose quick-acTIon hydraulic couplers 农业拖拉机和机具 通用液压快换接头 |
China National Standards TI |
English PDF |
GB/T 5669-2008 |
Rotary TIller - Rotary blades and blade holders 旋耕机械 刀和刀座 |
China National Standards TI |
English PDF |
GB/T 5668-2008 |
Rotary TIller 旋耕机 |
China National Standards TI |
English PDF |
GB/T 5667-2008 |
ProducTIve testing methods for agricultural machinery 农业机械 生产试验方法 |
China National Standards TI |
English PDF |
GB/T 5262-2008 |
Agricultural machinery tesTIng conditions-general rules for measuring methods 农业机械 试验条件测定方法的一般规定 |
China National Standards TI |
English PDF |
GB/T 4127.13-2008 |
Bonded abrasive products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a verTIcal grinder 固结磨具 尺寸 第13部分:立式砂轮机用去毛刺和荒磨砂轮 |
China National Standards TI |
English PDF |
GB/T 4127.11-2008 |
Bonded abrasive products - Dimensions - Part 11:Hand finishing sTIcks 固结磨具 尺寸 第11部分:手持抛光磨石 |
China National Standards TI |
English PDF |
GB/T 2485-2008 |
Bonded abrasive products - Technical specificaTIons 固结磨具 技术条件 |
China National Standards TI |
English PDF |
GB/T 2480-2008 |
ConvenTIonal abrasive - Silicon carbide 普通磨料 碳化硅 |
China National Standards TI |
English PDF |
GB/T 2479-2008 |
ConvenTIonal abrasive - White fused alumina 普通磨料 白刚玉 |
China National Standards TI |
English PDF |
GB/T 2478-2008 |
ConvenTIonal abrasive - Brown fused alumina 普通磨料 棕刚玉 |
China National Standards TI |
English PDF |
GB/T 21960-2008 |
The tesTIng method and accepting condition of the driver’s seat on agricultural and forestry tractors 农林拖拉机驾驶座试验方法和验收条件 |
China National Standards TI |
English PDF |
GB/T 21959-2008 |
Tractor-trailer combinaTIon - Specifications 拖拉机运输机组 技术条件 |
China National Standards TI |
English PDF |
GB/T 21957-2008 |
The faTIgue-life testing method of the axle shaft and drive shaft on the test stand,wheeled agricultural tractor 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法 |
China National Standards TI |
English PDF |
GB/T 21956.3-2008 |
The strength tesTIng method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法 |
China National Standards TI |
English PDF |
GB/T 21956.2-2008 |
The strength tesTIng method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法 |
China National Standards TI |
English PDF |
GB/T 21956.1-2008 |
The strength tesTIng method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法 |
China National Standards TI |
English PDF |
GB/T 21955-2008 |
Tractors and machinery for agriculture and forestry - Paper fricTIon disc - Technical specifications 农林拖拉机和机械 纸基摩擦片 技术条件 |
China National Standards TI |
English PDF |
GB/T 21954.2-2008 |
Metal cutTIng band saw blades - Part 2:Characteristics and dimensions 金属切割带锯条 第2部分:特性和尺寸 |
China National Standards TI |
English PDF |
GB/T 21954.1-2008 |
Metal cutTIng band saw blades - Part 1:Terms 金属切割带锯条 第1部分:术语 |
China National Standards TI |
English PDF |
GB/T 21953-2008 |
Single point cutTIng tool - Corner radii 单刃刀具 刀尖圆弧半径 |
China National Standards TI |
English PDF |
GB/T 21952-2008 |
Polycrystalline diamond inserts,TIpped - Dimensions 镶聚晶金刚石刀片 尺寸 |
China National Standards TI |
English PDF |
GB/T 21951-2008 |
Cubic boron nitride inserts,TIpped or solid - Dimensions 镶或整体立方氮化硼刀片 尺寸 |
China National Standards TI |
English PDF |
GB/T 21949.2-2008 |
CNC universal tool milling machines - Part 2: SpecificaTIons 数控万能工具铣床 第2部分:技术条件 |
China National Standards TI |
English PDF |
GB/T 21949.1-2008 |
CNC universal tool milling machines - Part 1: TesTIng of the accuracy 数控万能工具铣床 第1部分:精度检验 |
China National Standards TI |
English PDF |
GB/T 21948.2-2008 |
Test condiTIons for CNC milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards TI |
English PDF |
GB/T 21948.1-2008 |
Test condiTIons for CNC milling machines with table of variable height - Testing of accuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards TI |
English PDF |
GB/T 21947-2008 |
Numerically milling machines for special screws - TesTIng of the accuracy 数控异型螺杆铣床 精度检验 |
China National Standards TI |
English PDF |
GB/T 21946-2008 |
Numerical control gear shaving machines - TesTIng of the accuracy 数控剃齿机 精度检验 |
China National Standards TI |
English PDF |
GB/T 21945-2008 |
Numerical control sector gear shaping machines - TesTIng of the accuracy 数控扇形齿轮插齿机 精度检验 |
China National Standards TI |
English PDF |
GB/T 21944.3-2008 |
Special products of silicon carbide - Kiln furniture of reacTIon bonded silicon carbide - Part 3:Rollers 碳化硅特种制品 反应烧结碳化硅窑具 第3部分:辊棒 |
China National Standards TI |
English PDF |
GB/T 21944.1-2008 |
Special products of silicon carbide - Kiln furniture of reacTIon bonded silicon carbide - Part 1:Beam 碳化硅特种制品 反应烧结碳化硅窑具 第1部分:方梁 |
China National Standards TI |
English PDF |
GB/T 21942-2008 |
Earth-moving machinery - Loader and front loading excavator buckets - Volumetric raTIngs 土方机械 装载机和正铲挖掘机的铲斗 容量标定 |
China National Standards TI |
English PDF |
GB/T 21941-2008 |
Earth-moving machinery - Volumetric raTIngs for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders 土方机械 液压挖掘机和挖掘装载机的反铲斗和抓铲斗 容量标定 |
China National Standards TI |
English PDF |
GB/T 21940-2008 |
Earth-moving machinery - CutTIng edges used on tractor-dozers, graders and scrapers - Principal shapes and basic dimensions 土方机械 推土机、平地机和铲运机用刀片 主要形状和基本尺寸 |
China National Standards TI |
English PDF |
GB/T 21937-2008 |
Earth-moving machinery - Crawler and wheel tractor dozer blades - Volumetric raTIngs 土方机械 履带式和轮胎式推土机的推土铲 容量标定 |
China National Standards TI |
English PDF |
GB/T 17997-2008 |
EvaluaTIng regulations for the operation and Spraying quality of sprayers in the field 农药喷雾机(器)田间操作规程及喷洒质量评定 |
China National Standards TI |
English PDF |
GB/T 17587.5-2008 |
Ball screws - Part 5: StaTIc and dynamic load ratings and operational life 滚珠丝杠副 第5部分:轴向额定静载荷和动载荷及使用寿命 |
China National Standards TI |
English PDF |
GB/T 17587.4-2008 |
Ball screws - Part 4: StaTIc axial rigidity 滚珠丝杠副 第4部分:轴向静刚度 |
China National Standards TI |
English PDF |
GB/T 17111-2008 |
CutTIng tool - Designation of high-speed steel groups 切削刀具 高速钢分组代号 |
China National Standards TI |
English PDF |
GB/T 16770.2-2008 |
Solid hardmetal end mills with parallel shank - Part 2: Technical specificaTIons 整体硬质合金直柄立铣刀 第2部分:技术条件 |
China National Standards TI |
English PDF |
GB/T 16456.4-2008 |
End mills with brazed helical hardmetal TIps - Part 4:Technical specifications 硬质合金螺旋齿立铣刀 第4部分:技术条件 |
China National Standards TI |
English PDF |
GB/T 16456.3-2008 |
End mills with brazed helical hardmetal TIps - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分:莫氏锥柄立铣刀 型式和尺寸 |
China National Standards TI |
English PDF |
GB/T 16456.2-2008 |
End mills with brazed helical TIps - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分:7:24 锥柄立铣刀 型式和尺寸 |
China National Standards TI |
English PDF |
GB/T 16456.1-2008 |
End mills with brazed helical hardmetal TIps - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分:直柄立铣刀 型式和尺寸 |
China National Standards TI |
English PDF |
GB/T 15371-2008 |
Torsional vibraTIon of crankshaft system - Measurement and evaluation method 曲轴轴系扭转振动的测量与评定方法 |
China National Standards TI |
English PDF |
GB/T 15306.4-2008 |
Indexable inserts for cutTIng tools - Ceramic inserts with rounded corners - Part 4:Specifications 陶瓷可转位刀片 第4部分:技术条件 |
China National Standards TI |
English PDF |
GB/T 15306.3-2008 |
Indexable inserts for cutTIng tools - Ceramic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U) 陶瓷可转位刀片 第3部分:无孔刀片尺寸(U级) |
China National Standards TI |
English PDF |
GB/T 15306.2-2008 |
Indexable inserts for cutTIng tools - Ceramic inserts with rounded corners - Part 2: Dimensions of inserts with cylindrical fixing hole 陶瓷可转位刀片 第2部分:带孔刀片尺寸 |
China National Standards TI |
English PDF |
GB/T 15306.1-2008 |
Indexable inserts for cutTIng tools - Ceramic inserts with rounded corners - Part 1: Dimensions of inserts without fixing hole(Class G) 陶瓷可转位刀片 第1部分:无孔刀片尺寸(G级) |
China National Standards TI |
English PDF |
GB/T 14917-2008 |
Earth-moving machinery - Service instrumentaTIon 土方机械 维修服务用仪器 |
China National Standards TI |
English PDF |
GB/T 14321-2008 |
TesTIng method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer 刚玉磨料中α-Al2O3相X射线定量测定方法 |
China National Standards TI |
English PDF |
GB/T 10940-2008 |
ReciprocaTIon type grass cutter 往复式割草机 |
China National Standards TI |
English PDF |
GB/T 10168-2008 |
Earth-moving machinery - Backhoe loaders - DefiniTIons and commercial specifications 土方机械 挖掘装载机 术语和商业规格 |
China National Standards TI |
English PDF |
GB/T 7320-2008 |
Refractories - DeterminaTIon of thermal expansion 耐火材料 热膨胀试验方法 |
China National Standards TI |
English PDF |
GB/T 5989-2008 |
Refractory products - DeterminaTIon of refractoriness-under-load - Differential method with rising temperature 耐火材料 荷重软化温度试验方法 示差升温法 |
China National Standards TI |
English PDF |
GB/T 21928-2008 |
DeterminaTIon of phthalate esters in food plastic packaging materials 食品塑料包装材料中邻苯二甲酸酯的测定 |
China National Standards TI |
English PDF |
GB/T 19691-2008 |
Product of geographical indicaTIon - Gougunao tea 地理标志产品 狗牯脑茶 |
China National Standards TI |
English PDF |
GB/T 19460-2008 |
Product of geographical indicaTIon - Huangshan maofeng tea 地理标志产品 黄山毛峰茶 |
China National Standards TI |
English PDF |
GB/T 19051-2008 |
Product of geographical indicaTIon - Nanfeng mandarin 地理标志产品 南丰蜜桔 |
China National Standards TI |
English PDF |
GB/T 19048-2008 |
Product of geographical indicaTIon - Longkou vermicelli 地理标志产品 龙口粉丝 |
China National Standards TI |
English PDF |
GB/T 18846-2008 |
Product of geographical indicaTIon - Zhanhua brumal jujube 地理标志产品 沾化冬枣 |
China National Standards TI |
English PDF |
GB/T 14983-2008 |
Refractory products - DeterminaTIon of alkali-resistance 耐火材料 抗碱性试验方法 |
China National Standards TI |
English PDF |
GB/T 10646-2008 |
Electric heaTIng food ovens - Types and principal parameters 电热食品烤炉型式与主要参数 |
China National Standards TI |
English PDF |
GB/T 10645-2008 |
Electric heaTIng food ovens - Method of draw up model 电热食品烤炉型号编制方法 |
China National Standards TI |
English PDF |
GB/T 10644-2008 |
Electric heaTIng food ovens 电热食品烤炉 |
China National Standards TI |
English PDF |
GB/T 22023-2008 |
Acceptance specificaTIon of ultra high temperature sterilizing equipment for liquid food 液体食品超高温瞬时灭菌(UHT)设备验收规范 |
China National Standards TI |
English PDF |
GB/T 21986-2008 |
Assessment of agroclimate impact: classficaTIon method of annual crop climate types 农业气候影响评价:农作物气候年型划分方法 |
China National Standards TI |
English PDF |
GB/T 21930-2008 |
Product of geographical indicaTIon - Yunjin 地理标志产品 云锦 |
China National Standards TI |
English PDF |
GB 50434-2008 |
Control standards for soil and water loss on development and construcTIon projects 开发建设项目水土流失防治标准 |
China National Standards TI |
English PDF |
GB/T 223.4-2008 |
Alloyed steel - DeterminaTIon of manganese content - Potentiometric or visual titration method 钢铁及合金 锰含量的测定 电位滴定或可视滴定法 |
China National Standards TI |
English PDF |
GB/T 21933.3-2008 |
Ferronickel - DeterminaTIon of cobalt content - Flame atomic absorption spectrometric method 镍铁 钴含量的测定 火焰原子吸收光谱法 |
China National Standards TI |
English PDF |
GB/T 21933.2-2008 |
Ferronickel - DeterminaTIon of silicon content - Gravimetric method 镍铁 硅含量的测定 重量法 |
China National Standards TI |
English PDF |
GB/T 21933.1-2008 |
Ferronickel - DeterminaTIon of nickel content - The dimethylglyoxime gravimetric method 镍铁 镍含量的测定 丁二酮肟重量法 |
China National Standards TI |
English PDF |
GB/T 21932-2008 |
Nickel and ferronickel - DeterminaTIon of sulphur content - Barium sulfate gravimctric method after alumina chromatographic separation 镍和镍铁 硫含量的测定 氧化铝色层分离-硫酸钡重量法 |
China National Standards TI |
English PDF |
GB/T 21931.3-2008 |
Nickel,ferronickel and nickel alloys - DeterminaTIon of phosphorus content - Phosphovanoclonolybeate molecular absorption spectrometric method 镍、镍铁和镍合金 磷含量的测定 磷钒钼黄分光光度法 |
China National Standards TI |
English PDF |
GB/T 21931.2-2008 |
Nickel, ferronickel and nickel alloys - DeterminaTIon of sulfur content - Infrared absorption method after induction furnace combustion 镍、镍铁和镍合金 硫含量的测定 高频燃烧红外吸收法 |
China National Standards TI |
English PDF |
GB/T 21931.1-2008 |
Nickel,ferronickel and nickel alloys - DeterminaTIon of carbon content - Infrared absorption method after induction furnace combustion 镍、镍铁和镍合金 碳含量的测定 高频燃烧红外吸收法 |
China National Standards TI |
English PDF |
GB/T 1839-2008 |
Test method for gravimetric determinaTIon of the mass per unit area of galvanized coatings on steel products 钢产品镀锌层质量试验方法 |
China National Standards TI |
English PDF |
GB/T 14165-2008 |
Corrosion of metals and alloys - Atmospheric corrosion tesTIng - General requirements for field tests 金属和合金 大气腐蚀试验 现场试验的一般要求 |
China National Standards TI |
English PDF |
GB/T 12773-2008 |
Valve steel and superalloy bars for internal combusTIon engines 内燃机气阀用钢及合金棒材 |
China National Standards TI |
English PDF |
GB/T 4728.9-2008 |
Graphical symbols for diagrams - Part 9:TelecommunicaTIons - Switching and peripheral equipment 电气简图用图形符号 第9部分:电信 交换和外围设备 |
China National Standards TI |
English PDF |
GB/T 4728.7-2008 |
Graphical symbols for diagrams - Part 7:Switchgear,controlgear and protecTIve devices 电气简图用图形符号 第7部分:开关、控制和保护器件 |
China National Standards TI |
English PDF |
GB/T 4728.6-2008 |
Graphical symbols for diagrams - Part 6:ProducTIon and conversion of electrical energy 电气简图用图形符号 第6部分:电能的发生与转换 |
China National Standards TI |
English PDF |
GB/T 4728.11-2008 |
Graphical symbols for diagrams - Part 11:Architectural and topographical installaTIon plans and diagrams 电气简图用图形符号 第11部分:建筑安装平面布置图 |
China National Standards TI |
English PDF |
Find out:39883Items | To Page of: First -Previous-Next -Last | [296] [297] [298] [299] [300] [301] [302] |