GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 20155-2006 |
DeterminaTIon of mercury, cadmium and lead in battery 电池中汞、镉、铅含量的测定 |
China National Standards TI |
English PDF |
GB/T 20153-2006 |
ClassificaTIon and interpretation of new lighting products 新型照明产品的分类与解释 |
China National Standards TI |
English PDF |
GB/T 20150-2006 |
Erythema reference acTIon spectrum and standard erythema dose 红斑基准反应光谱及标准红斑剂量 |
China National Standards TI |
English PDF |
GB/T 20149-2006 |
Road traffic lights - Photometric properTIes of 200mm roundel signals 道路交通信号灯 200mm圆形信号灯的光度特性 |
China National Standards TI |
English PDF |
GB/T 20148-2006 |
SpaTIal distribution of daylight-CIE standard general sky 日光的空间分布 CIE一般标准天空 |
China National Standards TI |
English PDF |
GB/T 20143-2006 |
Procedure for use in the preparaTIon of maximum lamp outlines 灯最大外形尺寸图的制定程序 |
China National Standards TI |
English PDF |
GB/T 15152-2006 |
Methods of judging degradaTIon for interference to mobile radiocommunication in the presence of impulsive noise 脉冲噪声干扰引起移动通信性能降级的评定方法 |
China National Standards TI |
English PDF |
GB/T 14285-2006 |
Technical code for relaying protecTIon and security automatic equipment 继电保护和安全自动装置技术规程 |
China National Standards TI |
English PDF |
GB/T 12190-2006 |
Method for measuring the shielding effecTIveness of electromagnetic shielding enclosures 电磁屏蔽室屏蔽效能的测量方法 |
China National Standards TI |
English PDF |
GB/T 12168-2006 |
ProtecTIve covers of insulating material for live working 带电作业用遮蔽罩 |
China National Standards TI |
English PDF |
GB/T 6994-2006 |
Electrical installaTIon in ships - Definitions and general requirements 船舶电气设备 定义和一般规定 |
China National Standards TI |
English PDF |
GB/T 4942.1-2006 |
Degrees of protecTIon provided by the integral design of rotating electrical machines (IP code) - Classification 旋转电机整体结构的防护等级(IP代码)-分级 |
China National Standards TI |
English PDF |
GB/T 20142-2006 |
Composite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- DefiniTIons, Test methods and acceptance criteria 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则 |
China National Standards TI |
English PDF |
GB/T 20140-2006 |
Dynamic characterisTIc and vibration measurement method of turbo-generators on stator windings and evaluation criteria 透平型发电机定子绕组端部动态特性和振动试验方法及评定 |
China National Standards TI |
English PDF |
GB/T 20139-2006 |
Electrical insulaTIon systems - Thermal evaluation of modifications to an established wire-wound EIS 电气绝缘结构-对已确定等级的散绕绕组绝缘结构进行组分调整的热评定方法 |
China National Standards TI |
English PDF |
GB/T 20138-2006 |
Degrees of protecTIon provided by enclosures for electrical equipment against external mechanical impacts (IK code) 电器设备外壳对外界机械碰撞的防护等级(IK代码) |
China National Standards TI |
English PDF |
GB/T 20137-2006 |
Method for determining losses and efficiency of three-phase cage inducTIon motors 三相笼型异步电动机损耗和效率的确定方法 |
China National Standards TI |
English PDF |
GB/T 20136-2006 |
Electric power plant with inernal combusTIon engines, general method of test for 内燃机电站通用试验方法 |
China National Standards TI |
English PDF |
GB/T 12786-2006 |
AutomaTIc electric power plant with internal combustion engines for general specification 自动化内燃机电站通用技术条件 |
China National Standards TI |
English PDF |
GB/T 15208.2-2006 |
Micro-dose X-ray security inspecTIon system - Part 2: Test block 微剂量X射线安全检查设备 第2部分:测试体 |
China National Standards TI |
English PDF |
GB/T 8650-2006 |
EvaluaTIon of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards TI |
English PDF |
GB/T 5687.11-2006 |
Ferrochromium-DeterminaTIon of titanium content-Diantipyrylmethane spectrophotometric method 铬铁 钛含量的测定 二安替比林甲烷分光光度法 |
China National Standards TI |
English PDF |
GB/T 5687.10-2006 |
Ferrochromium-DeterminaTIon of manganese content-Flame atomic absorption spectrometric method 铬铁 锰含量的测定 火焰原子吸收光谱法 |
China National Standards TI |
English PDF |
GB/T 4157-2006 |
Laboratory tesTIng of metals for resistance to specific forms of environmental cracking in H2S environments 金属在硫化氢环境中抗特殊形式环境开裂实验室试验 |
China National Standards TI |
English PDF |
GB/T 20127.9-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method 钢铁及合金 痕量元素的测定 第9部分:电感耦合等离子体发射光谱法测定钪含量 |
China National Standards TI |
English PDF |
GB/T 20127.8-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第8部分:氢化物发生-原子荧光光谱法测定锑含量 |
China National Standards TI |
English PDF |
GB/T 20127.7-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 7: Determination of lead content by oscillopolarographic method 钢铁及合金 痕量元素的测定 第7部分:示波极谱法测定铅含量 |
China National Standards TI |
English PDF |
GB/T 20127.6-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 6: Determination of germanium content by gallic acid oscillopolarographic method 钢铁及合金 痕量元素的测定 第6部分:没食子酸-示波极谱法测定锗含量 |
China National Standards TI |
English PDF |
GB/T 20127.5-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 5: Determination of gallium content by extraction separation-rhodamine B photometric method 钢铁及合金 痕量元素的测定 第5部分:萃取分离-罗丹明B光度法 测定镓含量 |
China National Standards TI |
English PDF |
GB/T 20127.4-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 4: Determination of copper content by graphite furnace atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第4部分:石墨炉原子吸收光谱法测定铜含量 |
China National Standards TI |
English PDF |
GB/T 20127.3-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part3:Determination of calcium,magnesium,barium content by inductively coupled plasma atomic emission spectrometric method 钢铁及合金 痕量元素的测定 第3部分:电感耦合等离子体发射光谱法测定钙、镁和钡含量 |
China National Standards TI |
English PDF |
GB/T 20127.2-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第2部分:氢化物发生-原子荧光光谱法 测定砷含量 |
China National Standards TI |
English PDF |
GB/T 20127.13-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method 钢铁及合金 痕量元素的测定 第13部分:碘化物萃取-苯基荧光酮光度法测定锡含量 |
China National Standards TI |
English PDF |
GB/T 20127.12-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 12: Determination of zinc content by flame atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第12部分:火焰原子吸收光谱法测定锌含量 |
China National Standards TI |
English PDF |
GB/T 20127.1-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 1: Determination of silver content by graphite furnace atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第1部分:石墨炉原子吸收光谱法测定银含量 |
China National Standards TI |
English PDF |
GB/T 20127.11-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 11: Determination of indium and thallium content by inductively coupled plasma-mass spectrometric method 钢铁及合金 痕量元素的测定 第11部分:电感耦合等离子体质谱法测定铟和铊含量 |
China National Standards TI |
English PDF |
GB/T 20127.10-2006 |
Steel and alloy - DeterminaTIon of trace element contents Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第10部分:氢化物发生-原子荧光光谱法测定硒含量 |
China National Standards TI |
English PDF |
GB/T 20126-2006 |
Unalloyed steel -- DeterminaTIon of low carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) 非合金钢 低碳含量的测定 第2部分:感应炉(经预加热)内燃烧后红外吸收法 |
China National Standards TI |
English PDF |
GB/T 20125-2006 |
Low-alloy steel - DeterminaTIon of multi-element contents - Inductively coupled plasma atomic emission spectrometric method 低合金钢 多元素的测定 电感耦合等离子体发射光谱法 |
China National Standards TI |
English PDF |
GB/T 20124-2006 |
Steel and iron -- DeterminaTIon of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) 钢铁 氮含量的测定 惰性气体熔融热导法(常规方法) |
China National Standards TI |
English PDF |
GB/T 20123-2006 |
Steel and iron -- DeterminaTIon of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) 钢铁 总碳硫含量的测定 高频感应炉燃烧后红外吸收法(常规方法) |
China National Standards TI |
English PDF |
GB/T 20122-2006 |
Corrosion of metals and alloys -- EvaluaTIon of stress corrosion cracking by the drop evaporation test 金属和合金的腐蚀 滴落蒸发试验的应力腐蚀开裂评价 |
China National Standards TI |
English PDF |
GB/T 20121-2006 |
Corrosion of metals and alloys -- Corrosion tests in arTIficial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) 金属和合金的腐蚀 人造气氛的腐蚀试验 间歇盐雾下的室外加速试验(疮痂试验) |
China National Standards TI |
English PDF |
GB/T 20120.2-2006 |
Corrosion of metals and alloys -- Corrosion faTIgue testing -- Part 2: Crack propagation testing using precracked specimens 金属和合金的腐蚀 腐蚀疲劳试验 第2部分:预裂纹试验裂纹扩展试验 |
China National Standards TI |
English PDF |
GB/T 20120.1-2006 |
Corrosion of metals and alloys - Corrosion faTIgue testing - Part 1: Cycles to failure testing 金属和合金的腐蚀 腐蚀疲劳试验 第1部分:循环失效试验 |
China National Standards TI |
English PDF |
GB/T 1510-2006 |
Manganese ores-DeterminaTIon of aluminium content-EDTA titrimetric method 锰矿石 铝含量的测定 EDTA滴定法 |
China National Standards TI |
English PDF |
GB/T 11261-2006 |
Steel and iron DeterminaTIon of oxygen content The pulse heating inert gas fusion-infra-red absorption method 钢铁 氧含量的测定 脉冲加热惰气熔融-红外线吸收法 |
China National Standards TI |
English PDF |
GB/T 20131-2006 |
CalibraTIon and usage of α/β gas proportional counters α/β流气式正比计数器的标定和使用 |
China National Standards TI |
English PDF |
GB/T 13632.2-2006 |
Measurements for monitoring adequate cooling within the core of pressurized light water reactors Part 2: InstrumentaTIon requirements during cold shutdown 监督压水堆堆芯充分冷却的测量要求 第2部分:冷停堆期间监测仪表的要求 |
China National Standards TI |
English PDF |
GB/T 10263-2006 |
Environmental condiTIons and test procedures for nuclear radiation detectors 核辐射探测器环境条件与试验方法 |
China National Standards TI |
English PDF |
GB 50370-2005 |
Code for design of gas fire exTInguishing systems 气体灭火系统设计规范 |
China National Standards TI |
English PDF |
GB 20128-2006 |
Inert fire exTInguishing agent 惰性气体灭火剂 |
China National Standards TI |
English PDF |
GB 16670-2006 |
Cabinet gas fire exTInguishing equipment 柜式气体灭火装置 |
China National Standards TI |
English PDF |
GB/T 22000-2006 |
Food safety management systems - Requirements for any organizaTIon in the food chain 食品安全管理体系 食品链中各类组织的要求 |
China National Standards TI |
English PDF |
GB 10621-2006 |
Food addiTIve liquid carbon dioxide 食品添加剂 液体二氧化碳 |
China National Standards TI |
English PDF |
GB 20265-2006 |
Moulded plasTIcs industrial boots with chemical resistance 耐化学品的工业用模压塑料靴 |
China National Standards TI |
English PDF |
GB 14866-2006 |
The specificaTIons for personal eye-protectors 个人用眼护具技术要求 |
China National Standards TI |
English PDF |
GB/T 9841-2006 |
Feed addiTIve Vitamin B12 powder (cyanocobalamin cobione) 饲料添加剂 维生素B12(氰钴胺)粉剂 |
China National Standards TI |
English PDF |
GB/T 7303-2006 |
Feed addiTIve vitamin C (L-Ascorbic acid) 饲料添加剂 维生素C(L-抗坏血酸) |
China National Standards TI |
English PDF |
GB/T 20195-2006 |
Animal feeding stuffs - PreparaTIon of test samples 动物饲料 试样的制备 |
China National Standards TI |
English PDF |
GB/T 20194-2006 |
Animal feeding stuffs - DeterminaTIon of starch content - Polarimetric method 饲料中淀粉含量的测定 旋光法 |
China National Standards TI |
English PDF |
GB/T 20204-2006 |
General tesTIng specification of automatic system equipment for water resources and hydrology 水利水文自动化系统设备检验测试通用技术规范 |
China National Standards TI |
English PDF |
GB/T 20203-2006 |
Technical specificaTIon for irrigation projects with low pressure pipe conveyance 农田低压管道输水灌溉工程技术规范 |
China National Standards TI |
English PDF |
GB/T 20196-2006 |
DeterminaTIon of salinomycin in feeds 饲料中盐霉素的测定 |
China National Standards TI |
English PDF |
GB 14681.1-2006 |
Electrically heated glazing materials for locomoTIves and ships Part 1: Heated glass panes for ships’ rectangular windows 机车船舶用电加温玻璃 第1部分:船用矩形窗电加温玻璃 |
China National Standards TI |
English PDF |
GB/T 20117-2006 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparaTIon for the determination of particle size distribution of ceramic powders 精细陶瓷粉体颗粒尺寸分布测试用样品的制备 |
China National Standards TI |
English PDF |
GB/T 20095-2006 |
Assessment code for performance of solar water heaTIng systems 太阳热水系统性能评定规范 |
China National Standards TI |
English PDF |
GB/T 10700-2006 |
Test methods for elasTIc moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method 精细陶瓷弹性模量试验方法 弯曲法 |
China National Standards TI |
English PDF |
GB/T 20110-2006 |
Hydraulic fluid power - Cleanliness of parts and components - InspecTIon document and principles related to contaminant collection,analysis and data reporting 液压传动 零件和元件的清洁度 与污染物的收集、分析和数据报告相关的检验文件和准则 |
China National Standards TI |
English PDF |
GB/T 20108-2006 |
Low temperature unitary air condiTIoners 低温单元式空调机 |
China National Standards TI |
English PDF |
GB/T 20107-2006 |
AbsorpTIon water chiller(heater) for villa and similar application 户用及类似用途的吸收式冷(热)水机 |
China National Standards TI |
English PDF |
GB/T 20106-2006 |
General principles of sTIpulating the assessment indicator frame of cleaner production for industries 工业清洁生产评价指标体系编制通则 |
China National Standards TI |
English PDF |
GB/T 20104-2006 |
Method for idenTIfying tendency of coal to spontaneous combustion by oxygen absorption with chromatograph 煤自燃倾向性色谱吸氧鉴定法 |
China National Standards TI |
English PDF |
GB/T 20103-2006 |
Technical terms for membrane separaTIon 膜分离技术 术语 |
China National Standards TI |
English PDF |
GB/T 15335-2006 |
DeterminaTIon of leakage rate and specific resistance for air duct 风筒漏风率和风阻的测定方法 |
China National Standards TI |
English PDF |
GB/T 14914-2006 |
The specificaTIon for offshore observation 海滨观测规范 |
China National Standards TI |
English PDF |
GB/T 3787-2006 |
Technical safety code for management, operaTIon, inspection and maintenance of hand-held motor-operated electric tools 手持式电动工具的管理、使用、检查和维修安全技术规程 |
China National Standards TI |
English PDF |
GB/T 2423.55-2006 |
Environmental tesTIng for electric and electronic products - Part 2: Test methods - Test Eh: Hammer tests 电工电子产品环境试验 第2部分: 环境测试 试验Eh:锤击试验 |
China National Standards TI |
English PDF |
GB/T 20115.1-2006 |
Basic specificaTIons for fuel fired installations Part 1: General 燃料加热装置基本技术条件 第1部分:通用部分 |
China National Standards TI |
English PDF |
GB/T 20114-2006 |
Specific test methods for d.c. machines on convenTIonal and rectifier-fed supplies 普通电源或整流电源供电直流电机的特殊试验方法 |
China National Standards TI |
English PDF |
GB/T 20113-2006 |
Electrical insulaTIon systems (EIS) - Thermal classification 电气绝缘结构(EIS) 热分级 |
China National Standards TI |
English PDF |
GB/T 17948.3-2006 |
FuncTIonal evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound windings - Thermal evaluation and classification of insulation sysyems used in machines up to and including 50MVA and 15kV 旋转电机绝缘结构功能性评定 成型绕组试验规程 50MVA、15kV及以下电机绝缘结构热评定和分级 |
China National Standards TI |
English PDF |
GB/T 17948.2-2006 |
FuncTIonal evaluation of insulation systems for rotating electrical machines - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions 旋转电机绝缘结构功能性评定 散绕绕组试验规程 变更和绝缘组分替代的分级 |
China National Standards TI |
English PDF |
GB/T 1410-2006 |
Methods of test for volume resisTIvity and surface resistivity of solid electrical insulating materials 固体绝缘材料体积电阻率和表面电阻率试验方法 |
China National Standards TI |
English PDF |
GB/T 1409-2006 |
Recommended methods for the determinaTIon of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths 测量电气绝缘材料在工频、音频、高频(包括米波波长在内)下电容率和介质损耗因数的推荐方法 |
China National Standards TI |
English PDF |
GB/T 10581-2006 |
Method of test for electrical resistance and resisTIvity of insulating materials at elevated temperatures 绝缘材料在高温下电阻和电阻率的试验方法 |
China National Standards TI |
English PDF |
GB/T 10064-2006 |
Methods of test for the determinaTIon of the insulation resistance of solid insulating materials 测定固体绝缘材料绝缘电阻的试验方法 |
China National Standards TI |
English PDF |
GB 13078.2-2006 |
Hygienical standard for in feeds ToleraTIon of ochratoxin A and zearalenone in feeds 饲料卫生标准 饲料中赭曲霉毒素A和玉米赤霉烯酮的允许量 |
China National Standards TI |
English PDF |
GB/T 3871.6-2006 |
Agricultural tractors - Test procedures - Part 6: DeterminaTIon of braking performance 农业拖拉机 试验规程 第6部分:农林车辆制动性能的确定 |
China National Standards TI |
English PDF |
GB/T 3871.4-2006 |
Agricultural tractors - Test procedures - Part 4: Rear three-point linkage lifTIng capacity 农业拖拉机 试验规程 第4部分:后置三点悬挂装置提升能力 |
China National Standards TI |
English PDF |
GB/T 3871.16-2006 |
Agricultural tractors - Test procedures - Part 16: Axle power determinaTIon 农业拖拉机 试验规程 第16部分:轴功率测定 |
China National Standards TI |
English PDF |
GB/T 3871.14-2006 |
Agricultural tractors - Test procedures - Part 14: ParTIal power PTO - Non-mechanically transmitted power 农业拖拉机 试验规程 第14部分:非机械式传输的部分功率输出动力输出轴 |
China National Standards TI |
English PDF |
GB/T 3871.10-2006 |
Agricultural tractors - Test procedures - Part 10: Low temperature starTIng 农业拖拉机 试验规程 第10部分:低温起动 |
China National Standards TI |
English PDF |
GB/T 3810.9-2006 |
Test methods of ceramic TIles Part 9: Determination of resistance to thermal shock 陶瓷砖试验方法 第9部分:抗热震性的测定 |
China National Standards TI |
English PDF |
GB/T 3810.8-2006 |
Test methods of ceramic TIles Part 8: Determination of linear thermal expansion 陶瓷砖试验方法 第8部分:线性热膨胀的测定 |
China National Standards TI |
English PDF |
GB/T 3810.7-2006 |
Test methods of ceramic TIles Part 7: Determination of resistance to surface abrasion for glazed tiles 陶瓷砖试验方法 第7部分:有釉砖表面耐磨性的测定 |
China National Standards TI |
English PDF |
GB/T 3810.6-2006 |
Test methods of ceramic TIles Part 6: Determination of resistance to deep abrasion for unglazed tiles 陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定 |
China National Standards TI |
English PDF |
GB/T 3810.5-2006 |
Test methods of ceramic TIles Part 5: Determination of impact resistance by measurement of coefficient of restitution 陶瓷砖试验方法 第5部分:用恢复系数确定砖的抗冲击性 |
China National Standards TI |
English PDF |
GB/T 3810.4-2006 |
Test methods of ceramic TIles Part 4: Determination of modulus of rupture and breaking strength 陶瓷砖试验方法 第4部分:断裂模数和破坏强度的测定 |
China National Standards TI |
English PDF |
GB/T 3810.3-2006 |
Test method of ceramic TIles Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density 陶瓷砖试验方法 第3部分:吸水率、显气孔率、表观相对密度和容重的测定 |
China National Standards TI |
English PDF |
Find out:39883Items | To Page of: First -Previous-Next -Last | [326] [327] [328] [329] [330] [331] [332] |