GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19495.6-2004 |
Detection of genetically modified organisms and derived products--Gene-chip detection 转基因产品检测 基因芯片检测方法 |
China National Standards di |
English PDF |
GB/T 19495.5-2004 |
Detection of genetically modified organisms and derived products--Quantitative nucleic acid based methods 转基因产品检测 核酸定量 PCR 检测方法 |
China National Standards di |
English PDF |
GB/T 19495.4-2004 |
Detection of genetically modified organisms and derived products--Qualitative nucleic acid based methods 转基因产品检测 核酸定性 PCR 检测方法 |
China National Standards di |
English PDF |
GB/T 19495.3-2004 |
Detection of genetically modified organisms and derived products--Nucleic acid extraction 转基因产品检测 核酸提取纯化方法 |
China National Standards di |
English PDF |
GB/T 19495.2-2004 |
Detection of genetically modified organisms and derived products--General requirements for laboratories 转基因产品检测 实验室技术要求 |
China National Standards di |
English PDF |
GB/T 19495.1-2004 |
Detection of genetically modified organisms and derived products--General requirements and definitions 转基因产品检测 通用要求和定义 |
China National Standards di |
English PDF |
GB 1895-2004 |
Food additive--Aluminum potassium sulfate 食品添加剂 硫酸铝钾 |
China National Standards di |
English PDF |
GB 1889-2004 |
Food additive--Calcium monohydrogen phosphate 食品添加剂 磷酸氢钙 |
China National Standards di |
English PDF |
GB 10616-2004 |
Food additive--Propylene glycol alginate 食品添加剂 藻酸丙二醇酯 |
China National Standards di |
English PDF |
GB 1589-2004 |
Limits of dimensions,axle load and masses for road vehicles 道路车辆外廓尺寸、轴荷及质量限值 |
China National Standards di |
English PDF |
GB/T 6730.58-2004 |
Iron ores--Determination of vanadium content--Flame atomic absorption spectrometric method 铁矿石 钒含量的测定 火焰原子吸收光谱法 |
China National Standards di |
English PDF |
GB/T 6238-2004 |
Agricultural tractors--Operator’s workplace,access and exit--dimensions 农业拖拉机驾驶室门道、紧急出口与驾驶员的工作位置尺寸 |
China National Standards di |
English PDF |
GB/T 6235-2004 |
Agricultural tractors--Operator’s seating accommodation--dimensions 农业拖拉机驾驶员座位装置尺寸 |
China National Standards di |
English PDF |
GB/T 5065-2004 |
Hot-dip lead-tin alloy coated cold rolled carbon steel sheets and strips 热镀铅锡合金碳素钢冷轧薄钢板及钢带 |
China National Standards di |
English PDF |
GB/T 10322.7-2004 |
Iron ore--Determination of size distribution by sieving 铁矿石 粒度分布的筛分测定 |
China National Standards di |
English PDF |
GB/T 19467.1-2004 |
Plastics--Acquisition and presentation of comparable single-point data--Part 1:Moulding materials 塑料 可比单点数据的获得和表示 第1部分:模塑材料 |
China National Standards di |
English PDF |
GB/T 19466.3-2004 |
Plastics--differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization 塑料 差示扫描量热法(DSC) 第3部分:熔融和结晶温度及热焓的测定 |
China National Standards di |
English PDF |
GB/T 19466.2-2004 |
Plastics--differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature 塑料 差示扫描量热法(DSC) 第2部分:玻璃化转变温度的测定 |
China National Standards di |
English PDF |
GB/T 19466.1-2004 |
Plastics--differential scanning calorimetry(DSC)--Part 1:General principles 塑料 差示扫描量热法(DSC) 第1部分:通则 |
China National Standards di |
English PDF |
GB/T 10335.4-2004 |
Coated paper and board--Coated folding board 涂布纸和纸板 涂布白纸板 |
China National Standards di |
English PDF |
GB/T 210.2-2004 |
Specification and determination methods of sodium carbonate for industrial use--Part 2:Specification and determination methods 工业碳酸钠及其试验方法 第2部分:工业碳酸钠试验方法 |
China National Standards di |
English PDF |
GB/T 12027-2004 |
Plastics--Film and sheeting--Determination of dimensional change on heating 塑料 薄膜和薄片 加热尺寸变化率试验方法 |
China National Standards di |
English PDF |
GB 210.1-2004 |
Specification and determination methods of sodium carbonate for industrial use--Part 1:sodium carbonate for industrial use 工业碳酸钠及其试验方法 第1部分:工业碳酸钠 |
China National Standards di |
English PDF |
GB/T 9983-2004 |
Industrial sodium tripolyphosphate 工业三聚磷酸钠 |
China National Standards di |
English PDF |
GB/T 19463-2004 |
Blade length series and its connection dimensions of wiper for passenger cars 乘用车用刮水器刮片长度尺寸系列及连接尺寸 |
China National Standards di |
English PDF |
GB 19452-2004 |
Safety code for inspection of hazardous properties for dangerous goods of oxidizing substances 氧化性危险货物危险特性检验安全规范 |
China National Standards di |
English PDF |
GB/T 17980.96-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 96:Fungicides against post-harvest diseases of banana 农药 田间药效试验准则(二) 第96部分:杀菌剂防治香蕉贮藏病害 |
China National Standards di |
English PDF |
GB/T 17980.93-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 93:Fungicides seed treatment against seedling diseases of cotton 农药 田间药效试验准则(二) 第93部分:杀菌剂种子处理防治棉花苗期病害 |
China National Standards di |
English PDF |
GB/T 17980.137-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 137:Restrain shoot medicament trials on potato 农药 田间药效试验准则(二) 第137部分:马铃薯抑芽剂试验 |
China National Standards di |
English PDF |
GB/T 17980.136-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 136:Restrain shoot medicament trials on tobacoo 农药 田间药效试验准则(二) 第136部分:烟草抑芽剂试验 |
China National Standards di |
English PDF |
GB/T 17980.127-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 127:Herbicides against weeds in crops with directional spray 农药 田间药效试验准则(二) 第127部分:除草剂行间喷雾防治作物田杂草 |
China National Standards di |
English PDF |
GB/T 17980.104-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 104:Fungicides against bakanal disease of rice 农药 田间药效试验准则(二) 第104部分:杀菌剂防治水稻恶苗病 |
China National Standards di |
English PDF |
GB/T 17980.101-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 101:Fungicides against pineappleal disease of sugarcane 农药 田间药效试验准则(二) 第101部分:杀菌剂防治甘蔗凤梨病 |
China National Standards di |
English PDF |
GB 50025-2004 |
Code for building construction in collapsible loess regions 湿陷性黄土地区建筑规范 |
China National Standards di |
English PDF |
GB/T 8122-2004 |
dial bore gauges 内径指示表 |
China National Standards di |
English PDF |
GB/T 8061-2004 |
Micrometer with dial comparator 杠杆千分尺 |
China National Standards di |
English PDF |
GB/T 62.4-2004 |
Wing nuts--die-casting wing 蝶形螺母 压铸 |
China National Standards di |
English PDF |
GB/T 4267-2004 |
Rotating tools with parallel shanks--diameters of shanks and sizes of driving squares 直柄回转工具 柄部直径和传动方头的尺寸 |
China National Standards di |
English PDF |
GB/T 4248-2004 |
Technical conditions for handtaper 1∶50 pin reamers 手用1∶50锥度销子铰刀 技术条件 |
China National Standards di |
English PDF |
GB/T 4245-2004 |
Technical conditions for machine reamers 机用铰刀技术条件 |
China National Standards di |
English PDF |
GB/T 4211.1-2004 |
High speed steel tool bits--Part 1:Types and dimensions 高速钢车刀条 第1部分:型式和尺寸 |
China National Standards di |
English PDF |
GB/T 19449.2-2004 |
Hollow taper interface with flange contact surface--Part 2:Receivers--dimensions 带有法兰接触面的空心圆锥接口 第2部分:安装孔----尺寸 |
China National Standards di |
English PDF |
GB/T 19449.1-2004 |
Hollow taper interface with flange contact surface--Part 1:Shanks--dimensions 带有法兰接触面的空心圆锥接口 第1部分:柄部----尺寸 |
China National Standards di |
English PDF |
GB/T 19448.3-2004 |
Tool holders with cylindrical shank--Part 3:Type B with rectangular radial seat 圆柱柄刀夹 第3部分:装径向矩形车刀的B型刀夹 |
China National Standards di |
English PDF |
GB/T 19448.1-2004 |
Tool holders with cylindrical shank--Part 1:Cylin-drical shank,location bore--Technical delivery conditions 圆柱柄刀夹 第1部分:圆柱柄、安装孔----供货技术条件 |
China National Standards di |
English PDF |
GB/T 1442-2004 |
Driving tenons and sockets for parallelshank tools--dimensions 直柄工具用传动扁尾及套筒 尺寸 |
China National Standards di |
English PDF |
GB/T 12615.4-2004 |
Closed end blind rivets with break pull mandrel and protruding head--Property class 51 封闭型平圆头抽芯铆钉 51级 |
China National Standards di |
English PDF |
GB/T 12615.3-2004 |
Closed end blind rivets with break pull mandrel and protruding head--Property class 06 封闭型平圆头抽芯铆钉 06级 |
China National Standards di |
English PDF |
GB/T 12615.2-2004 |
Closed end blind rivets with break pull mandrel and protruding head--Property class 30 封闭型平圆头抽芯铆钉 30级 |
China National Standards di |
English PDF |
GB/T 12615.1-2004 |
Closed end blind rivets with break pull mandrel and protruding head--Property class 11 封闭型平圆头抽芯铆钉 11级 |
China National Standards di |
English PDF |
GB/T 1131.2-2004 |
Hand reamers--Part 2:Technical conditions 手用铰刀 第2部分:技术条件 |
China National Standards di |
English PDF |
GB/T 1131.1-2004 |
Hand reamers--Part 1:Types and dimensions 手用铰刀 第1部分:型式和尺寸 |
China National Standards di |
English PDF |
GB/T 8185-2004 |
Palladium chloride 氯化钯 |
China National Standards di |
English PDF |
GB/T 8184-2004 |
Rhodium electroplating solution 铑电镀液 |
China National Standards di |
English PDF |
GB/T 6609.9-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of cupric oxide content--2,9-dimethyl-1,10 phenanthroline photometric method 氧化铝化学分析方法和物理性能测定方法 新亚铜灵光度法测定氧化铜含量 |
China National Standards di |
English PDF |
GB/T 6609.8-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of chromium sesquioxide content--diphenyl carbazide photometric method 氧化铝化学分析方法和物理性能测定方法 二苯基碳酰二肼光度法测定三氧化二铬含量 |
China National Standards di |
English PDF |
GB/T 6609.7-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of titanium dioxide content--Diantiprylmehane photometric method 氧化铝化学分析方法和物理性能测定方法 二安替吡啉甲烷光度法测定二氧化钛含量 |
China National Standards di |
English PDF |
GB/T 6609.5-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of sodium oxide content 氧化铝化学分析方法和物理性能测定方法 氧化钠含量的测定 |
China National Standards di |
English PDF |
GB/T 6609.3-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of silicon dioxide content--Molybdenum blue photometric method 氧化铝化学分析方法和物理性能测定方法 钼蓝光度法测定二氧化硅含量 |
China National Standards di |
English PDF |
GB/T 6609.28-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of the fine particle size distribution(less than 60μm)--Method using electroformed sieves 氧化铝化学分析方法和物理性能测定方法 小于60μm的细粉末粒度分布的测定 湿筛法 |
China National Standards di |
English PDF |
GB/T 6609.18-2004 |
Chemical analysis methods and determination of physical performanceof alumina--Determination of sulfate content--N,N-dimethyl-P-phenylenediamine spectrophotometric method 氧化铝化学分析方法和物理性能测定方法 N,N-二甲基对苯二胺分光光度法测定硫酸根含量 |
China National Standards di |
English PDF |
GB/T 6609.10-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of vanadic oxide content--N-benzoyl-N-phenylhydroxylamine extraction photometric method 氧化铝化学分析方法和物理性能测定方法 苯甲酰苯基羟胺萃取光度法测定五氧化二钒含量 |
China National Standards di |
English PDF |
GB/T 1819.5-2004 |
Methods for chemical analysis of tin concentrates--Determination of arsenic content--The molybdoantimonyarsenate blue spectrophotometric method and the distillation-iodimetric titrimetric method 锡精矿化学分析方法 砷量的测定 砷锑钼蓝分光光度法和蒸馏分离-碘滴定法 |
China National Standards di |
English PDF |
GB/T 1819.12-2004 |
Methods for chemical analysis of tin concentrates--Determination of silicon dioxide content--The silicomolybdenum blue spectrophotometric method 锡精矿化学分析方法 二氧化硅量的测定 硅钼蓝分光光度法 |
China National Standards di |
English PDF |
GB/T 1422-2004 |
Iridium powder 铱粉 |
China National Standards di |
English PDF |
GB/T 1421-2004 |
Rhodium powder 铑粉 |
China National Standards di |
English PDF |
GB/T 8446.2-2004 |
Heat sink for power semiconductor device--Part 2:Measuring method of thermal resistance and inputfluid-output fluid pressure difference 电力半导体器件用散热器 第2部分:热阻和流阻测试方法 |
China National Standards di |
English PDF |
GB/T 8366-2004 |
Resistance welding--Resistance welding equipment--Mechanical and electrical requirements 阻焊 电阻焊机 机械和电气要求 |
China National Standards di |
English PDF |
GB/T 3984.2-2004 |
Power capacitors for induction heating installations--Part 2:Ageing test,destruction test and requirements for disconnecting internal fuses 感应加热装置用电力电容器 第2部分:老化试验、破坏试验和内部熔丝隔离要求 |
China National Standards di |
English PDF |
GB/T 19443-2004 |
Insulators for overhead lines with a nominal voltage above 1000V--Ceramic or glass insulator units for d.c. systems--difinitions,test methods and acceptance criteria 标称电压高于1000V的架空线路用绝缘子----直流系统用瓷或玻璃绝缘子元件----定义、试验方法和接收准则 |
China National Standards di |
English PDF |
GB/T 12747.2-2004 |
Shunt power capacitors of the self-healing type for a.c.systems having a rated voltage up to and including 1000V--Part 2:Ageing test,self-healing test and destruction test 标称电压1 kV及以下交流电力系统用自愈式并联电容器 第2部分:老化试验、自愈性试验和破坏试验 |
China National Standards di |
English PDF |
GB/T 12747.1-2004 |
Shunt power capacitors of the self-healing type for a.c. systems having a rated valtage up to and including 1000V--Part 1:General--Performance,testing and rating--Safety requirements--Guide for installation and operation 标称电压1 kV及以下交流电力系统用自愈式并联电容器 第1部分:总则----性能、试验和定额----安全要求----安装和运行导则 |
China National Standards di |
English PDF |
GB/T 7164-2004 |
Radiation detectors for nuclear reactors--Characteristics and test methods 用于核反应堆的辐射探测器 特性及其测试方法 |
China National Standards di |
English PDF |
GB/T 12162.3-2004 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 3:Calibration of area and personal dosemeters and the measurement of their response as a function of en 用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第3部分:场所剂量仪和个人剂量计的校准及其能量响应和角响应的测定 |
China National Standards di |
English PDF |
GB/T 12162.2-2004 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 2:Dosimetry for radiation protection over the energy ranges 8keV to 1.3 MeV and 4MeV to 9MeV 用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第2部分:辐射防护用的能量范围为 8keV~1.3MeV 和 4MeV~9MeV 的参考辐射的剂量测定 |
China National Standards di |
English PDF |
GB 19431-2004 |
The discharge standard of pollutants for monosodium glutamate industry 味精工业污染物排放标准 |
China National Standards di |
English PDF |
GB 50344-2004 |
Techical standard for inspection of building structure 建筑结构检测技术标准 |
China National Standards di |
English PDF |
GB/T 18932.16-2003 |
Method for the determination of diastase number in honey--Spectrophotometric method 蜂蜜中淀粉酶值的测定方法 分光光度法 |
China National Standards di |
English PDF |
GB/T 19424-2003 |
General rules of natural plant additives for feed 天然植物饲料添加剂通则 |
China National Standards di |
English PDF |
GB/T 19422-2003 |
Feed additive--L-ascorbic acid-2-phosphate 饲料添加剂 L-抗坏血酸-2-磷酸酯 |
China National Standards di |
English PDF |
GB/T 7679.5-2003 |
Mining machinery terminology--Part5:Crushing and grinding equipment 矿山机械术语 第5部分:破碎粉磨设备 |
China National Standards di |
English PDF |
GB/T 19419-2003 |
Welding coordination--Tasks and responsibilities 焊接管理 任务与职责 |
China National Standards di |
English PDF |
GB/T 12470-2003 |
Low-alloy steel electrodes and fluxes for submerged arc welding 埋弧焊用低合金钢焊丝和焊剂 |
China National Standards di |
English PDF |
GB/T 12362-2003 |
Tolerances and machining--Allowances ofsteel die forging 钢质模锻件 公差及机械加工余量 |
China National Standards di |
English PDF |
GB/T 12361-2003 |
General specification of steel die forgings 钢质模锻件 通用技术条件 |
China National Standards di |
English PDF |
GB 13749-2003 |
diesel pile driver--Safety operation rules 柴油打桩机 安全操作规程 |
China National Standards di |
English PDF |
GB/T 9485-2003 |
Radial turbochargers--Connection dimensions 径流式涡轮增压器 联接尺寸 |
China National Standards di |
English PDF |
GB/T 4983-2003 |
Vacuum technology--Quick release couplings--dimensions--Part 2:Screwed type 真空技术 快卸连接器 尺寸 第2部分:拧紧型 |
China National Standards di |
English PDF |
GB/T 4982-2003 |
Vacuum technology--Quick release couplings--dimensions--Part 1:Clamped type 真空技术 快卸连接器 尺寸 第1部分:夹紧型 |
China National Standards di |
English PDF |
GB/T 19412-2003 |
Method of measurement and rating of air conditioning system with thermal storage 蓄冷空调系统的测试和评价方法 |
China National Standards di |
English PDF |
GB/T 19411-2003 |
Dehumidifiers 除湿机 |
China National Standards di |
English PDF |
GB/T 19408.1-2003 |
Agricultural vehicles--Mechanical connections between towed and towing vehicles--Part 1:dimensions of hitch-hooks 农业车辆 挂车和牵引车的机械连接 第1部分:牵引钩尺寸 |
China National Standards di |
English PDF |
GB/T 15623.2-2003 |
Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 2:Test methods for three-way directional flow control valves 液压传动 电调制液压控制阀 第2部分:三通方向流量控制阀试验方法 |
China National Standards di |
English PDF |
GB/T 15623.1-2003 |
Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 1:Test methods for four-way directional flow control valves 液压传动 电调制液压控制阀 第1部分:四通方向流量控制阀试验方法 |
China National Standards di |
English PDF |
GB/T 15169-2003 |
Qualification test of welders--Fusion welding forsteels 钢熔化焊焊工技能评定 |
China National Standards di |
English PDF |
GB/T 19405.2-2003 |
Surface mounting technology--Part 2:Transportation and storage conditions of surface mounting devices(SMD)--Application guide 表面安装技术 第2部分:表面安装元器件的运输和贮存条件 应用指南 |
China National Standards di |
English PDF |
GB/T 19403.1-2003 |
Semiconductor devices--Integrated circuits--Part 11:Section 1:Internal visual examination for semiconductor integrated circuits(excluding hybrid circuits) 半导体器件 集成电路 第11部分:第1篇:半导体集成电路 内部目检 (不包括混合电路) |
China National Standards di |
English PDF |
GB/T 18910.2-2003 |
Liquid crystal and solid-state display devices--Part 2:Liquid crystal display modules sectional specification 液晶和固态显示器件 第2部分:液晶显示模块分规范 |
China National Standards di |
English PDF |
GB/T 18794.7-2003 |
Information technology--Open Systems Interconnection--Security frameworks for open systems--Part 7:Security audit and alarms framework 信息技术 开放系统互连 开放系统安全框架 第7部分:安全审计和报警框架 |
China National Standards di |
English PDF |
GB/T 18794.4-2003 |
Information technology--Open Systems Interconnection--Security frameworks for open systems--Part 4:Non-repudiation framework 信息技术 开放系统互连 开放系统安全框架 第4部分:抗抵赖框架 |
China National Standards di |
English PDF |
Find out:13477Items | To Page of: First -Previous-Next -Last | [109] [110] [111] [112] [113] [114] [115] |