GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 17590-2008 |
Three-piece can with aluminum easy open end 铝易开盖三片罐 |
China National Standards end |
English PDF |
GB 22177-2008 |
pendimethalin technical 二甲戊灵原药 |
China National Standards end |
English PDF |
GB 22176-2008 |
pendimethalin emulsifiable concentrates 二甲戊灵乳油 |
China National Standards end |
English PDF |
GB/T 3229-2008 |
Assembly tools for screws and nuts - Drive ends for hand and machine operated screwdriver bits and connecting parts - Dimensions, torque testing 螺栓螺母用装配工具 手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards end |
English PDF |
GB/T 2885.1-2008 |
Narrow gauge mine cars - Part 1: Solid-end car 矿用窄轨车辆 第1部分: 固定车箱式矿车 |
China National Standards end |
English PDF |
GB 22128-2008 |
Technical specifications for end-of-Life Vehicles recycling and dismantling enterprise 报废汽车回收拆解企业技术规范 |
China National Standards end |
English PDF |
GB/T 9326.3-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 3: Sealing end 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第3部分: 终端 |
China National Standards end |
English PDF |
GB/T 15854-2008 |
Food blenders 食物搅碎器 |
China National Standards end |
English PDF |
GB/T 22086-2008 |
Recommendations for welding of aluminium and aluminium alloys 铝及铝合金弧焊推荐工艺 |
China National Standards end |
English PDF |
GB/T 14038-2008 |
Pneumatic fluid power - Connections - Ports and stud ends 气动连接 气口和螺柱端 |
China National Standards end |
English PDF |
GB 16917.22-2008 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO) - Part 22:Applicability of the general rules to RCBO functionally dependent of line voltage 家用和类似用途的带过电流保护的剩余 电流动作断路器(RCBO) 第22部分:一般规则对动作功能与电源电压有关的RCBO的适用性 |
China National Standards end |
English PDF |
GB 16917.21-2008 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO) Part 21:Applicability of the general rules to RCBO functionally independent of line voltage 家用和类似用途的带过电流保护的剩余 电流动作断路器(RCBO) 第21部分:一般规则对动作功能与电源电压无关的RCBO的适用性 |
China National Standards end |
English PDF |
GB 16916.22-2008 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 22:Applicability of the general rules to RCCB functionally dependent of line voltage 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第22部分:一般规则对动作功能与电源电压有关的RCCB的适用性 |
China National Standards end |
English PDF |
GB 16916.21-2008 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 21:Applicability of the general rules to RCCB functionally independent of line voltage 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第21部分:一般规则对动作功能与电源电压无关的RCCB的适用性 |
China National Standards end |
English PDF |
GB/T 18910.5-2008 |
Liquid crystal and solid-state display devices - Part 5:Environmental,endurance and mechanical test methods 液晶和固态显示器件 第5部分:环境、耐久性和机械试验方法 |
China National Standards end |
English PDF |
GB/T 9870.2-2008 |
Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2:Torsion pendulum methods at low frequencies 硫化橡胶或热塑性橡胶动态性能的测定 第2部分:低频扭摆法 |
China National Standards end |
English PDF |
GB/T 16770.2-2008 |
Solid hardmetal end mills with parallel shank - Part 2: Technical specifications 整体硬质合金直柄立铣刀 第2部分:技术条件 |
China National Standards end |
English PDF |
GB/T 16770.1-2008 |
Solid hardmetal end mills with parallel shank - Part 1: Dimensions 整体硬质合金直柄立铣刀 第1部分:型式与尺寸 |
China National Standards end |
English PDF |
GB/T 16456.4-2008 |
end mills with brazed helical hardmetal tips - Part 4:Technical specifications 硬质合金螺旋齿立铣刀 第4部分:技术条件 |
China National Standards end |
English PDF |
GB/T 16456.3-2008 |
end mills with brazed helical hardmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分:莫氏锥柄立铣刀 型式和尺寸 |
China National Standards end |
English PDF |
GB/T 16456.2-2008 |
end mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分:7:24 锥柄立铣刀 型式和尺寸 |
China National Standards end |
English PDF |
GB/T 16456.1-2008 |
end mills with brazed helical hardmetal tips - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分:直柄立铣刀 型式和尺寸 |
China National Standards end |
English PDF |
GB/T 14328-2008 |
Roughing end mill 粗加工立铣刀 |
China National Standards end |
English PDF |
GB/T 14298-2008 |
Helical end mills with indexable inserts 可转位螺旋立铣刀 |
China National Standards end |
English PDF |
GB/T 9996.2-2008 |
Determination of appearance quality of yarns made of cotton or man-made fibers,or their blends by winding on the black board - Part 2: individual assessment 棉及化纤纯纺、混纺纱线外观质量黑板检验方法 第2部分:分别评定法 |
China National Standards end |
English PDF |
GB/T 9996.1-2008 |
Determination of appearance quality of yarns made of cotton or man-made fibres,or their blends by winding on the black board - Part 1:comprehensive assessment 棉及化纤纯纺、混纺纱线外观质量黑板检验方法 第1部分:综合评定法 |
China National Standards end |
English PDF |
GB/T 21868.6-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill 颜料和体质颜料 评定分散性用的分散方法 第6部分:用三辊磨分散 |
China National Standards end |
English PDF |
GB/T 21868.5-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller 颜料和体质颜料 评定分散性用的分散方法 第5部分:用自动平磨机分散 |
China National Standards end |
English PDF |
GB/T 21868.4-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4:Dispersion using a bead mill 颜料和体质颜料 评定分散性用的分散方法 第4部分:用砂磨分散 |
China National Standards end |
English PDF |
GB/T 21868.3-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill 颜料和体质颜料 评定分散性用的分散方法 第3部分:用高速搅拌机分散 |
China National Standards end |
English PDF |
GB/T 21868.2-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2:Dispersion using an oscillatory shaking machine 颜料和体质颜料 评定分散性用的分散方法 第2部分:用振荡磨分散 |
China National Standards end |
English PDF |
GB/T 21868.1-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1:Introduction 颜料和体质颜料 评定分散性用的分散方法 第1部分:总则 |
China National Standards end |
English PDF |
GB/T 21867.3-2008 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3:Assessment from the change in gloss 颜料和体质颜料 分散性的评定方法 第3部分:由光泽的变化进行评定 |
China National Standards end |
English PDF |
GB/T 21867.2-2008 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2:Assessment from the change in fineness of grind 颜料和体质颜料 分散性的评定方法 第2部分:由研磨细度的变化进行评定 |
China National Standards end |
English PDF |
GB/T 21867.1-2008 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1:Assessment from the change in tinting strength of coloured pigments 颜料和体质颜料 分散性的评定方法 第1部分:由着色颜料的着色力变化进行评定 |
China National Standards end |
English PDF |
GB/T 244-2008 |
Metallic materials-Tube - Bend test 金属管 弯曲试验方法 |
China National Standards end |
English PDF |
GB/T 14986-2008 |
High saturation magnetic induction, magnetic compensate alloys depending on temperature variation, corrosion-resisting, iron-aluminium, Permanent permeability, soft magneticalloys 高饱和、磁温度补偿、耐蚀、铁铝、恒磁导率软磁合金 |
China National Standards end |
English PDF |
GB/T 21737-2008 |
Purchase information on goods and services intended for consumers 为消费者提供商品和服务的购买信息 |
China National Standards end |
English PDF |
GB/T 5652-2008 |
Flared couplings - Flared end 扩口式管接头扩口端尺寸 |
China National Standards end |
English PDF |
GB/T 3756-2008 |
24° cone connectors - Swivel stud straight adapter with O-ring with stud end 卡套式锥密封组合直通管接头 |
China National Standards end |
English PDF |
GB/Z 21713-2008 |
Recommended practice on characteristic of surges in low-voltage (1000 V and Less) AC Power circuits 低压交流电源(不高于1000 V)中的浪涌特性 |
China National Standards end |
English PDF |
GB/T 21688-2008 |
Woodworking machines - Single-end edge bonding machine - Nomenclature 木工机床 单面直线封边机 术语 |
China National Standards end |
English PDF |
GB/T 21687-2008 |
Woodworking machines - Single-end tenoning machines with several spindles - Nomenclature 木工机床 单头多轴开榫机 术语 |
China National Standards end |
English PDF |
GB 21633-2008 |
Bulk blending fertilizer 掺混肥料(BB肥) |
China National Standards end |
English PDF |
GB/T 21537-2008 |
Cone rubber fender 锥型橡胶护舷 |
China National Standards end |
English PDF |
GB/T 22838.17-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 17: Cigarettes - Determination of loss of tobacco from the ends - Method using a vibro-bench 卷烟和滤棒物理性能的测定 第17部分:卷烟 端部掉落烟丝的测定 振动法 |
China National Standards end |
English PDF |
GB/T 15972.47-2008 |
Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss 光纤试验方法规范 第47部分:传输特性和光学特性的测量方法和试验程序 宏弯损耗 |
China National Standards end |
English PDF |
GB/Z 18620.4-2008 |
Cylindrical gears - Code of inspection practice - Part 4: Reommendations relative to surface texture and tooth contact pattern checking 圆柱齿轮 检验实施规范 第4部分:表面结构和轮齿接触斑点的检验 |
China National Standards end |
English PDF |
GB/Z 18620.3-2008 |
Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes 圆柱齿轮 检验实施规范 第3部分: 齿轮坯、轴中心距和轴线平行度的检验 |
China National Standards end |
English PDF |
GB/T 985.4-2008 |
Recommended joint preparation for welding on clad steels 复合钢的推荐坡口 |
China National Standards end |
English PDF |
GB/T 985.3-2008 |
Recommended joint preparation for gas-shield arc welding on aluminium and its alloys 铝及铝合金气体保护焊的推荐坡口 |
China National Standards end |
English PDF |
GB/T 985.2-2008 |
Recommended joint preparation for submerged arc welding 埋弧焊的推荐坡口 |
China National Standards end |
English PDF |
GB/T 985.1-2008 |
Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding 气焊、焊条电弧焊、气体保护焊和高能束焊的推荐坡口 |
China National Standards end |
English PDF |
GB/T 2653-2008 |
Bend test methods on welded joints 焊接接头弯曲试验方法 |
China National Standards end |
English PDF |
GB/T 11699-2008 |
Small craft with inboard engine - Propeller shaft ends and bosses 舷内机小艇 螺旋桨轴端和桨毂 |
China National Standards end |
English PDF |
GB/T 21482-2008 |
Ships and marine technology - Pneumatic rubber fenders 船舶与海上技术 充气橡胶靠球 |
China National Standards end |
English PDF |
GB/T 21472-2008 |
Stainless steel bends and tees for the food industry 食品工业用不锈钢弯头和三通 |
China National Standards end |
English PDF |
GB/T 21429-2008 |
Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations 户外和户内电气设备用空心复合绝缘子 定义、试验方法、接收准则和设计推荐 |
China National Standards end |
English PDF |
GB/T 21421.1-2008 |
Composite string insulator units for overhead lines with a nominal voltage greater than 1000V - Part 1: Standard strength classes and end fittings 标称电压高于1000V架空线路用复合绝缘子串元件 第1部分:标准强度等级和端部附件 |
China National Standards end |
English PDF |
GB/T 8812.1-2007 |
Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test 硬质泡沫塑料 弯曲性能的测定 第1部分:基本弯曲试验 |
China National Standards end |
English PDF |
GB/T 6579-2007 |
Laborator glassware - Thermal shock and thermal shock endurance - Test methods 实验室玻璃仪器 热冲击和热冲击强度试验方法 |
China National Standards end |
English PDF |
GB/T 4547-2007 |
Glass containers - Thermal shock resistance and thermal shock endurance - Test methods 玻璃容器 抗热震性和热震耐久性试验方法 |
China National Standards end |
English PDF |
GB/T 17948.6-2007 |
Rotating electrical machine - Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems 旋转电机绝缘结构功能性评定 成型绕组试验规程 绝缘结构热机械耐久性评定 |
China National Standards end |
English PDF |
GB/T 17948.5-2007 |
Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor functinal evaluation - endurance under combined thermal and electrical stresses of insulation system used in machines up to 旋转电机绝缘结构功能性评定 成型绕组试验规程 多因子功能性评定 50MVA、15kV及以下电机绝缘结构热、电综合应力耐久性 |
China National Standards end |
English PDF |
GB/T 229-2007 |
Metallic materials - Charpy pendulum impact test method 金属材料 夏比摆锤冲击试验方法 |
China National Standards end |
English PDF |
GB/T 21189-2007 |
Verification of pendulum impact-testing machines used for Charpy, lzod and tensile impact-testing of plastics 塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验 |
China National Standards end |
English PDF |
GB/T 10416-2007 |
Agricultural machinery - endless variable - speed V-belts and groove sections of corresponding pulleys 农业机械 环形变速V带及带轮轮槽截面 |
China National Standards end |
English PDF |
GB/T 10415-2007 |
Agricultural machinery - endless hexagonal belts and groove sections of corresponding pulleys 农业机械 环形六角带及带轮轮槽截面 |
China National Standards end |
English PDF |
GB/T 21133-2007 |
Environmental tobacco smoke Estimation of its contribution to respirable suspended particles Method based on solanesol 环境烟草烟气 可吸入悬浮颗粒物的估测 茄呢醇法 |
China National Standards end |
English PDF |
GB/T 21131-2007 |
Environmental tobacco smoke Estimation of its contribution to respirable suspended particles Determination of particulate matter by ultraviolet absorbance and by fluorescence 环境烟草烟气 可吸入悬浮颗粒物的估测 用紫外吸收法和荧光法测定粒相物 |
China National Standards end |
English PDF |
GB/T 6742-2007 |
Paints and varnishes - Bend test (cylindrical mandrel) 色漆和清漆 弯曲试验(圆柱轴) |
China National Standards end |
English PDF |
GB/T 1730-2007 |
Paints and varnishes - Pendulum damping test 色漆和清漆 摆杆阻尼试验 |
China National Standards end |
English PDF |
GB/T 14370-2007 |
Anchorage,grip and coupler for prestressing tendons 预应力筋用锚具、夹具和连接器 |
China National Standards end |
English PDF |
GB/T 242-2007 |
Metal materials-Tube - Drift-expending test 金属管 扩口试验方法 |
China National Standards end |
English PDF |
GB/T 18311.16-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - endface radius of spherically polished ferrules 纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分:检查和测量 球面抛光套管端面半径 |
China National Standards end |
English PDF |
GB/T 10485-2007 |
Road vehicles - Lighting and light-signalling devices - Environmental endurance 道路车辆 外部照明和光信号装置 环境耐久性 |
China National Standards end |
English PDF |
GB/T 13665-2007 |
Test method for damping capacity of metallic damping materials - Torsion pendulum method and Bending vibration 金属阻尼材料阻尼本领试验方法 扭摆法和弯曲振动法 |
China National Standards end |
English PDF |
GB/T 5340.3-2006 |
end mill with indexable inserts - Part 3: Technical requirements 可转位立铣刀 第3部分:技术条件 |
China National Standards end |
English PDF |
GB/T 5340.2-2006 |
end mill with indexable inserts - Part 2: End mill with Morse taper shank 可转位立铣刀 第2部分:莫氏锥柄立铣刀 |
China National Standards end |
English PDF |
GB/T 5340.1-2006 |
end mill with indexable inserts - Part 1: End mill with flatted parallel shank 可转位立铣刀 第1部分:削平直柄立铣刀 |
China National Standards end |
English PDF |
GB/T 20773-2006 |
Die singking end mills 模具铣刀 |
China National Standards end |
English PDF |
GB/T 5565-2006 |
Rubber or plastics hoses tubing - Bending tests 橡胶或塑料增强软管和非增强软管 弯曲试验 |
China National Standards end |
English PDF |
GB/T 5169.11-2006 |
Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products 电工电子产品着火危险试验 第11部分:灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法 |
China National Standards end |
English PDF |
GB/T 20656-2006 |
Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe 石油天然气工业 新套管、油管和平端钻杆现场检验 |
China National Standards end |
English PDF |
GB/Z 20649-2006 |
Electronic imaging - Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence, on WORM optical disk 电子成像 在WORM光盘上记录证据文件的电子记录系统的推荐管理方法 |
China National Standards end |
English PDF |
GB/Z 20648-2006 |
Electronic imaging - Recommendations for the expungement of information recorded on write-once optical media 电子成像 擦除记录在一次写入光学介质上的信息的推荐方法 |
China National Standards end |
English PDF |
GB 15092.4-2006 |
Switches for appliances Part 2:Particular requirements for independently mounted switches 器具开关 第2部分:独立安装开关的特殊要求 |
China National Standards end |
English PDF |
GB/T 8935-2006 |
Rendered pork fat for industrial 工业用猪油 |
China National Standards end |
English PDF |
GB/T 11026.3-2006 |
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics 电气绝缘材料 耐热性 第3部分:计算耐热特征参数的规程 |
China National Standards end |
English PDF |
GB/T 225-2006 |
Steel - Hardenability test by end quenching(Jominy test) 钢 淬透性的末端淬火试验方法(Jominy 试验) |
China National Standards end |
English PDF |
GB 7251.3-2006 |
Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for Low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards 低压成套开关设备和控制设备 第3部分:对非专业人员可进入场地的低压成套开关设备和控制设备-配电板的特殊要求 |
China National Standards end |
English PDF |
GB 20685-2006 |
endosulfan technical 硫丹原药 |
China National Standards end |
English PDF |
GB/T 20323.1-2006 |
Milling cutters - Designation - Part 1: Shank type end mills of solid or tipped design 铣刀代号 第1部分:整体或镶齿结构的带柄立铣刀 |
China National Standards end |
English PDF |
GB/T 12618.6-2006 |
Open end blind rivets with break pull mandrel and protruding head―property class 40,41 开口型平圆头抽芯铆钉 40、41级 |
China National Standards end |
English PDF |
GB/T 12618.5-2006 |
Open end blind rivets with break pull mandrel and protruding head―property class 20,21 22 开口型平圆头抽芯铆钉 20、21、22级 |
China National Standards end |
English PDF |
GB/T 12618.4-2006 |
Open end blind rivets with break pull mandrel and protruding head―property class 51 开口型平圆头抽芯铆钉 51级 |
China National Standards end |
English PDF |
GB/T 12618.3-2006 |
Open end blind rivets witn break pull mandrel and protruding head―property class 12 开口型平圆头抽芯铆钉 12级 |
China National Standards end |
English PDF |
GB/T 12618.2-2006 |
Open end blind rivets with break pull mandrel and protruding head―property class 30 开口型平圆头抽芯铆钉 30级 |
China National Standards end |
English PDF |
GB/T 12618.1-2006 |
Open end blind rivets with break pull mandrel and protruding head―property class 10,11 开口型平圆头抽芯铆钉 10、11级 |
China National Standards end |
English PDF |
GB/T 12617.5-2006 |
Open end blind rivets with break pull mandrel and countersunk head―property class 20,21,22 开口型沉头抽芯铆钉 20、21、22级 |
China National Standards end |
English PDF |
Find out:748Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 |