China National Standards

China me GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "me" GB Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 20734-2006 Mounting requirements for liquefied natural gas vehicle special equipment
    液化天然气汽车专用装置安装要求
    China National Standards
    me

    English PDF
    GB/T 1768-2006 Paints and varnishes - Determination of resistance to abrasion - Rotating abrasive rubber wheel method
    色漆和清漆 耐磨性的测定 旋转橡胶砂轮法
    China National Standards
    me

    English PDF
    GB/T 12828-2006 Rubber,raw and unvalcanized compounded - Determination of plasticity number and recovery number - Parallel plate method
    生胶和未硫化混炼胶 塑性值及复原值的测定 平行板法
    China National Standards
    me

    English PDF
    GB/T 11213.4-2006 Sodium hydroxide for chemical fiber use - Determination of silicon content - Reduced molybdosilicate spectrophotometric method
    化纤用氢氧化钠 硅含量的测定 还原硅钼酸盐分光光度法
    China National Standards
    me

    English PDF
    GB/T 13777-2006 Test method for maturity of cotton fibres - Microscopic method
    棉纤维成熟度试验方法 显微镜法
    China National Standards
    me

    English PDF
    GB/T 12411-2006 Test methods for jute and kenaf fibres
    黄、红麻纤维试验方法
    China National Standards
    me

    English PDF
    GB/T 9653-2006 Series parameter for cotton press
    棉花打包机系列参数
    China National Standards
    me

    English PDF
    GB/T 9481-2006 Axial-flow pump of medium-small size - Types and basic parameters
    中小型轴流泵 型式与基本参数
    China National Standards
    me

    English PDF
    GB/T 8243.7-2006 methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test
    内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验
    China National Standards
    me

    English PDF
    GB/T 8190.6-2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
    往复式内燃机 排放测量 第6部分:测量结果和试验报告
    China National Standards
    me

    English PDF
    GB/T 7920.13-2006 Concrete pavement machine and equipment - Terminology
    混凝土路面铺筑机械与设备 术语
    China National Standards
    me

    English PDF
    GB/T 7920.11-2006 Road construction and maintenance equipment - Asphalt mixing plants - Terminology and commercial specifications
    道路施工与养护设备 沥青混合料搅拌设备 术语和商业规格
    China National Standards
    me

    English PDF
    GB/T 7920.10-2006 Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications
    道路施工与养护设备 稳定土拌和机 术语和商业规格
    China National Standards
    me

    English PDF
    GB/T 20792-2006 Wheeled tractors - Maximum speeds - method of determination
    轮式拖拉机最高速度的确定方法
    China National Standards
    me

    English PDF
    GB/T 20791-2006 Tractors for agriculture and forestry - Mountings and apertures for external equipment controls
    农林拖拉机 外部装置操纵件用支架和孔口
    China National Standards
    me

    English PDF
    GB/T 20790-2006 Technical requirements for head-feed combine harvester
    半喂入联合收割机 技术条件
    China National Standards
    me

    English PDF
    GB/T 20789-2006 Equipment for harvesting and conservation - Round balers - Terminology and commercial specifications
    收获和贮存机械 圆捆打捆机 术语和商用规范
    China National Standards
    me

    English PDF
    GB/T 20787-2006 Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
    往复式内燃机 中、高速往复式内燃机底脚结构噪声测试规范
    China National Standards
    me

    English PDF
    GB 20775-2006 Fused Deposition Modeling machines - Technical requirements for safeguarding
    熔融沉积快速成形机床 安全防护技术要求
    China National Standards
    me

    English PDF
    GB/T 20726-2006 Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
    半导体探测器X射线能谱仪通则
    China National Standards
    me

    English PDF
    GB/T 20725-2006 Electron probe microanalysis guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
    波谱法定性点分析电子探针显微分析导则
    China National Standards
    me

    English PDF
    GB/T 20724-2006 method of thickness measurement for thin crystal by convergent beam electron diffraction
    薄晶体厚度的会聚束电子衍射测定方法
    China National Standards
    me

    English PDF
    GB/T 6074-2006 Leaf chains,clevises and sheaves - Dimensions,measuring forces and tensile strengths
    板式链、连接环和槽轮 - 尺寸、测量力和抗拉强度
    China National Standards
    me

    English PDF
    GB/T 3579-2006 Cycle chains - Characteristics and test methods
    自行车链条 技术条件和试验方法
    China National Standards
    me

    English PDF
    GB/T 20736-2006 Fatigue test method for transmission precision roller chain
    传动用精密滚子链条疲劳试验方法
    China National Standards
    me

    English PDF
    GB/T 1243-2006 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
    传动用短节距精密滚子链、套筒链、附件和链轮
    China National Standards
    me

    English PDF
    GB/T 12245-2006 methods of performance test for pressure reducing valves
    减压阀 性能试验方法
    China National Standards
    me

    English PDF
    GB/T 12244-2006 General requirements for pressure reducing valves
    减压阀 一般要求
    China National Standards
    me

    English PDF
    GB/T 27068-2006 Arrangements for the recogonition and acceptance of conformity assessment results
    合格评定结果的承认和接受协议
    China National Standards
    me

    English PDF
    GB/T 27060-2006 conformity assessment - Code of good practice
    合格评定 良好操作规范
    China National Standards
    me

    English PDF
    GB/T 20704-2006 Rock drilling - Rotary drill-rods and rotary drill-bits for dry drilling - Connecting dimensions
    岩石钻孔 干式钻杆和钻头 连接尺寸
    China National Standards
    me

    English PDF
    GB/T 20702-2006 Test method for extinguishing property of gaseous extinguishing agent
    气体灭火剂灭火性能测试方法
    China National Standards
    me

    English PDF
    GB/T 18294.3-2006 Technical identification method for fire - Part 3:Gas chromatography analysis
    火灾技术鉴定方法 第3部分:气相色谱法
    China National Standards
    me

    English PDF
    GB/T 20802-2006 Feed additive - Cupric methionine
    饲料添加剂 蛋氨酸铜
    China National Standards
    me

    English PDF
    GB 20815-2006 Digital video record equipment of video surveillance system in security & protection systems
    视频安防监控数字录像设备
    China National Standards
    me

    English PDF
    GB/T 5169.11-2006 Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
    电工电子产品着火危险试验 第11部分:灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法
    China National Standards
    me

    English PDF
    GB/T 5169.10-2006 Fire hazard testing for electric and electronic products - Part 10: Glow/hot-wire based test methods - Glow-wire apparatus and common test procedure
    电工电子产品着火危险试验 第10部分:灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法
    China National Standards
    me

    English PDF
    GB/T 4798.10-2006 Environmental conditions existing in the application of electric and electronic products - Guidance
    电工电子产品应用环境条件 导言
    China National Standards
    me

    English PDF
    GB/T 4797.4-2006 Environmental conditions appearing in nature for electric and electronic products - Solar radiation and temperature
    电工电子产品 自然环境条件 太阳辐射与温度
    China National Standards
    me

    English PDF
    GB/T 2424.7-2006 Environmental tests for electric and electronic products - Measurements in temperature chambers for tests A and tests B (with load)
    电工电子产品环境试验 试验A和B(带负载)用温度试验箱的测量
    China National Standards
    me

    English PDF
    GB/T 2424.6-2006 Environmental testing for electric and electronic products - Confirmation of the performance of temperature/humidity chambers
    电工电子产品环境试验 温度/湿度试验箱性能确认
    China National Standards
    me

    English PDF
    GB/T 2424.5-2006 Environmental tests for electric and electronic products - Confirmation of the performance of temperature chambers
    电工电子产品环境试验 温度试验箱性能确认
    China National Standards
    me

    English PDF
    GB/T 2423.37-2006 Environmental testing for electric and electronic products - Part 2: Test methods - Test L:Dust and sand
    电工电子产品环境试验 第2部分:试验方法 试验L:沙尘试验
    China National Standards
    me

    English PDF
    GB/T 2423.3-2006 Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat, Steady state
    电工电子产品环境试验 第2部分:试验方法 试验Cab:恒定湿热试验
    China National Standards
    me

    English PDF
    GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques - Radiated,radio-frequency, electromagnetic field immunity test
    电磁兼容 试验和测量技术 射频电磁场辐射抗扰度试验
    China National Standards
    me

    English PDF
    GB/T 17626.29-2006 Electromagnetic compatibility(EMC) - Testing and measurement techniques - Voltage dips,short interruptions and voltage variations on d.c. input power port immunity tests
    电磁兼容 试验和测量技术 直流电源输入端口电压暂降、短时中断和电压变化的抗扰度试验
    China National Standards
    me

    English PDF
    GB/T 17626.2-2006 Electromagnetic compatibility(EMC) - Testing and measurement techniques - Electrostatic discharge immunity test
    电磁兼容 试验和测量技术 静电放电抗扰度试验
    China National Standards
    me

    English PDF
    GB/T 5054.3-2006 Road vehicles - Multicore connecting cables -Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
    道路车辆 多芯电缆线 第3部分:无屏蔽护套低压电缆线的结构、尺寸和标记
    China National Standards
    me

    English PDF
    GB/T 5053.3-2006 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions,tests and requirements
    道路车辆 牵引车与挂车之间电连接器 定义、试验方法和要求
    China National Standards
    me

    English PDF
    GB/T 20703-2006 Electrical installations in ships equipment - Heating and cooking appliances
    船舶电气装置 取暖和烹调电器
    China National Standards
    me

    English PDF
    GB/T 5373-2006 measuring method of dimensions and masses parameter for motorcycles and mopeds
    摩托车和轻便摩托车尺寸和质量参数的测定方法
    China National Standards
    me

    English PDF
    GB/T 20662-2006 Petroleum and natural gas industries - Classification and conformity assessment of products processes and services
    石油天然气工业 产品、过程和服务的分级与合格评定
    China National Standards
    me

    English PDF
    GB/T 20660-2006 Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
    石油天然气工业 海上生产设施火灾、爆炸的控制和削减措施 要求和指南
    China National Standards
    me

    English PDF
    GB/T 20658-2006 Crude petroleum and liquid petroleum products - Volumetric metering of viscous hydrocarbons
    原油和液体石油产品 粘稠烃的体积计量
    China National Standards
    me

    English PDF
    GB/T 16904.1-2006 Checking of rolling stock clearance for standard gauge railways - Part 1:methods for inspecting
    标准轨距铁路机车车辆限界检查 第1部分:检查方法
    China National Standards
    me

    English PDF
    GB/T 12816-2006 The limiting value and measurement method for the interior noise in the railway passenger coach
    铁道客车内部噪声限值及测量方法
    China National Standards
    me

    English PDF
    GB/T 2624.4-2006 measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes
    用安装在圆形截面管道中的差压装置测量满管流体流量 第4部分:文丘里管
    China National Standards
    me

    English PDF
    GB/T 2624.3-2006 measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
    用安装在圆形截面管道中的差压装置测量满管流体流量 第3部分:喷嘴和文丘里喷嘴
    China National Standards
    me

    English PDF
    GB/T 2624.2-2006 measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates
    用安装在圆形截面管道中的差压装置测量满管流体流量 第2部分:孔板
    China National Standards
    me

    English PDF
    GB/T 2624.1-2006 measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements
    用安装在圆形截面管道中的差压装置测量满管流体流量 第1部分:一般原理和要求
    China National Standards
    me

    English PDF
    GB/T 20733-2006 Digital Still Cameras - Terminology
    数码照相机 术语
    China National Standards
    me

    English PDF
    GB/T 20732-2006 Optical fiber diameter analyser
    纤维直径光学分析仪
    China National Standards
    me

    English PDF
    GB/T 20730.1-2006 Industrial-process control systems -Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance
    工业过程控制系统用模拟输入两位或多位输出仪表 第1部分:性能评定方法
    China National Standards
    me

    English PDF
    GB/T 20729-2006 measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
    封闭管道中导电液体流量的测量 法兰安装电磁流量计 总长度
    China National Standards
    me

    English PDF
    GB/T 20728-2006 measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters
    封闭管道中流体流量的测量 科里奥利流量计的选型、安装和使用指南
    China National Standards
    me

    English PDF
    GB/T 20727-2006 measurement of fluid flow in closed conduits - Thermal mass flowmeters
    封闭管道中流体流量的测量 热式质量流量计
    China National Standards
    me

    English PDF
    GB/T 19903.10-2006 Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 10: General process data
    工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第10部分:通用工艺数据
    China National Standards
    me

    English PDF
    GB/T 19659.4-2006 Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems
    工业自动化系统与集成 开放系统应用集成框架 第4部分:基于以太网控制系统的参考描述
    China National Standards
    me

    English PDF
    GB/T 19659.3-2006 Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems
    工业自动化系统与集成 开放系统应用集成框架 第3部分:基于IEC 61158控制系统的参考描述
    China National Standards
    me

    English PDF
    GB/T 19659.2-2006 Industrial automation systems and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898-based control systems
    工业自动化系统与集成 开放系统应用集成框架 第2部分:基于ISO 11898的控制系统的参考描述
    China National Standards
    me

    English PDF
    GB/T 1185-2006 Surface imperfections of optical elements
    光学零件表面疵病
    China National Standards
    me

    English PDF
    GB 20665-2006 Minimum allowable values of energy efficiency and energy efficiency grades for domestic gas instantaneous water heater and gas fired heating and hot water combi-boilers
    家用燃气快速热水器和燃气采暖热水炉能效限定值及能效等级
    China National Standards
    me

    English PDF
    GB/T 13081-2006 Determination of mercury in feeds
    饲料中汞的测定
    China National Standards
    me

    English PDF
    GB/T 15038-2006 Analytical methods of wine and fruit wine
    葡萄酒、果酒通用分析方法
    China National Standards
    me

    English PDF
    GB/T 2812-2006 Test method of safety helmet
    安全帽测试方法
    China National Standards
    me

    English PDF
    GB/T 20655-2006 Protective clothing - mechanical properties - Determination of the resistance to puncture
    防护服装 机械性能 抗刺穿性的测定
    China National Standards
    me

    English PDF
    GB/T 20654-2006 Protective clothing - mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials
    防护服装 机械性能 材料抗刺穿及动态撕裂性的试验方法
    China National Standards
    me

    English PDF
    GB/T 20668-2006 Unified screw threads - Basic dimensions
    统一螺纹 基本尺寸
    China National Standards
    me

    English PDF
    GB/T 4169.21-2006 Components of injection moulds for plastics - Part 21: Rectangular locating element
    塑料注射模零件 第21部分:矩形定位元件
    China National Standards
    me

    English PDF
    GB/T 4169.11-2006 Components of injection moulds for plastics - Part 11: Round locating element
    塑料注射模零件 第11部分:圆形定位元件
    China National Standards
    me

    English PDF
    GB/T 20671.9-2006 Classification system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials
    非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法
    China National Standards
    me

    English PDF
    GB/T 20671.8-2006 Classification system and test methods for nonmetallic gasket materials - Part 8: Standard test method for flexibility of non-metallic gasket materials
    非金属垫片材料分类体系及试验方法 第8部分: 非金属垫片材料柔软性试验方法
    China National Standards
    me

    English PDF
    GB/T 20671.7-2006 Classification system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials
    非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法
    China National Standards
    me

    English PDF
    GB/T 20671.6-2006 Classification system and test methods for nonmetallic gasket materials - Part 6: Standard test method for adhesion of gasket materials to metal surfaces
    非金属垫片材料分类体系及试验方法 第6部分: 垫片材料与金属表面粘附性试验方法
    China National Standards
    me

    English PDF
    GB/T 20671.5-2006 Classification system and test methods for nonmetallic gasket materials - Part 5: Standard test method for creep relaxtion of gasket materials
    非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松驰率试验方法
    China National Standards
    me

    English PDF
    GB/T 20671.4-2006 Classification system and test methods for nonmetallic gasket materials - Part 4: Standard test method for sealability of gasket materials
    非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法
    China National Standards
    me

    English PDF
    GB/T 20671.3-2006 Classification system and test methods for nonmetallic gasket materials - Part 3: Standard test method for fluid resistance of gasket materials
    非金属垫片材料分类体系及试验方法 第3部分: 垫片材料耐液性试验方法
    China National Standards
    me

    English PDF
    GB/T 20671.2-2006 Classification system and test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials
    非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法
    China National Standards
    me

    English PDF
    GB/T 20671.1-2006 Classification system and test methods for nonmetallic gasket materials - Part 1: Standard classification system for nonmetallic gasket materials
    非金属垫片材料分类体系及试验方法 第1部分: 非金属垫片材料分类体系
    China National Standards
    me

    English PDF
    GB/T 20671.11-2006 Classification system and test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi
    非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法
    China National Standards
    me

    English PDF
    GB/T 20671.10-2006 Classification system and test methods for nonmetallic gasket materials - Part 10: Standard practice for evaluating thermal conductivity of gasket materials
    非金属垫片材料分类体系及试验方法 第10部分: 垫片材料导热系数测定方法
    China National Standards
    me

    English PDF
    GB/T 13253-2006 Rubber - Determination of manganese content by atomic absorption spectrometry
    橡胶中锰含量的测定 原子吸收光谱法
    China National Standards
    me

    English PDF
    GB 20664-2006 Limitation concentration of natural radioactivity in non-ferrous metal ores and concentrates products
    有色金属矿产品的天然放射性限值
    China National Standards
    me

    English PDF
    GB 20811-2006 Waste paper recycled requirements
    废纸再利用技术要求
    China National Standards
    me

    English PDF
    GB/Z 20649-2006 Electronic imaging - Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence, on WORM optical disk
    电子成像 在WORM光盘上记录证据文件的电子记录系统的推荐管理方法
    China National Standards
    me

    English PDF
    GB/Z 20648-2006 Electronic imaging - Recommendations for the expungement of information recorded on write-once optical media
    电子成像 擦除记录在一次写入光学介质上的信息的推荐方法
    China National Standards
    me

    English PDF
    GB/T 20258.3-2006 Data dictionary for fundamental geographic information features - Part 3:Data dictionary for fundamental geographic information features of 1:25 000 1:50 000 1:100 000 scale
    基础地理信息要素数据字典 第3部分:1:25 000 1:50 000 1:100 000基础地理信息要素数据字典
    China National Standards
    me

    English PDF
    GB/T 17574.9-2006 Semiconductor devices - Integrated circuits - Part 2-9: Digital integrated circuits - Blank detail specification for MOS ultraviolet light erasable electrically programmable read-only memories
    半导体器件 集成电路 第2-9部分:数字集成电路 紫外光擦除电可编程MOS只读存储器空白详细规范
    China National Standards
    me

    English PDF
    GB/T 17574.11-2006 Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit electrically erasable and programmable read-only memory
    半导体器件 集成电路 第2-11部分:数字集成电路 单电源集成电路电可擦可编程只读存储器 空白详细规范
    China National Standards
    me

    English PDF
    GB/T 20647.8-2006 Guidelines for community service - Part 8: Homemaking service
    社区服务指南 第8部分:家政服务
    China National Standards
    me

    English PDF

    Find out:28861Items   |  To Page of: First -Previous-Next -Last  | [227] [228] [229] [230] [231] [232] [233]

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards