GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 2577-2005 |
Test method for resin content of glass fiber reinforced plastics 玻璃纤维增强塑料树脂含量试验方法 |
China National Standards met |
English PDF |
GB/T 2576-2005 |
Test method for insoluble matter content of resin rsed in fiber reinforced plastics 纤维增强塑料树脂不可溶分含量试验方法 |
China National Standards met |
English PDF |
GB/T 19767-2005 |
Evaluation methods for microprocesssor-based instrument 基于微处理器仪表的评定方法 |
China National Standards met |
English PDF |
GB/T 1464-2005 |
Test method for density of sandwich construction or cores 夹层结构或芯子密度试验方法 |
China National Standards met |
English PDF |
GB/T 1463-2005 |
Test methods for density and relative density of fiber reinforced plastics 纤维增强塑料密度和相对密度试验方法 |
China National Standards met |
English PDF |
GB/T 1462-2005 |
Test methods for water absorption of fiber reinforced plastics 纤维增强塑料吸水性试验方法 |
China National Standards met |
English PDF |
GB/T 1457-2005 |
Test method for climbing drum peel strength of sandwich constructions 夹层结构滚筒剥离强度试验方法 |
China National Standards met |
English PDF |
GB/T 1456-2005 |
Test method for flexural properties of sandwich constructions 夹层结构弯曲性能试验方法 |
China National Standards met |
English PDF |
GB/T 1455-2005 |
Test method for shear properties of sandwich constructions or cores 夹层结构或芯子剪切性能试验方法 |
China National Standards met |
English PDF |
GB/T 1454-2005 |
Test method for edgewise compressive properties of sandwich constructions 夹层结构侧压性能试验方法 |
China National Standards met |
English PDF |
GB/T 1453-2005 |
Test method for flatwise compression properties of sandwich constructions or cores 夹层结构或芯子平压性能试验方法 |
China National Standards met |
English PDF |
GB/T 1452-2005 |
Test method for flatwise tension strength of sandwich constructions 夹层结构平拉强度试验方法 |
China National Standards met |
English PDF |
GB/T 11605-2005 |
methods of humidity measurement 湿度测量方法 |
China National Standards met |
English PDF |
GB/T 11165-2005 |
Laboratory pH meter 实验室pH计 |
China National Standards met |
English PDF |
GB/T 10248-2005 |
Gas analysis-Preparation of calibration gas mixtures-Static volumetric methods 气体分析 校准用混合气体的制备 静态体积法 |
China National Standards met |
English PDF |
GB/T 19765-2005 |
Geometrical Product Specifications(GPS)-Standard reference temperature for geometrical product specification and verification 产品几何量技术规范(GPS)--产品几何量技术规范和检验的标准参考温度 |
China National Standards met |
English PDF |
GB/T 12360-2005 |
Geometrical Product Specifications(GPS) Cone fit 产品几何量技术规范(GPS) 圆锥配合 |
China National Standards met |
English PDF |
GB/T 11334-2005 |
Geometrical Product Specifications(GPS)Cone tolerance 产品几何量技术规范(GPS) 圆锥公差 |
China National Standards met |
English PDF |
GB/T 7314-2005 |
metallic materials-Compression testing at ambient temperature 金属材料 室温压缩试验方法 |
China National Standards met |
English PDF |
GB/T 6706-2005 |
Determination of water Content of coking Phenol by cryoscopic method 焦化苯酚水分测定--结晶点下降法 |
China National Standards met |
English PDF |
GB/T 6701-2005 |
method for the determination of The non-volatile of naphthalene 萘不挥发物的测定方法 |
China National Standards met |
English PDF |
GB/T 5776-2005 |
Corrosion of metals and alloys-Guidelines for exposing and evaluating metals and alloys in surface sea water 金属和合金的腐蚀 金属和合金 在表层海水中暴露和评定的导则 |
China National Standards met |
English PDF |
GB/T 3069.2-2005 |
method for the determination of The crystallization temperature of naphthalene 萘结晶点的测定方法 |
China National Standards met |
English PDF |
GB/T 19748-2005 |
Steel-Charpy V-notch pendulum impact test-Instrumented test method 钢材夏比V型缺口摆锤冲击试验 仪器化试验方法 |
China National Standards met |
English PDF |
GB/T 19747-2005 |
Corrosion of metals and alloys-Determination of bimetallic Corrosion in outdoor exposure corrosion tests 金属和合金的腐蚀 双金属室外暴露腐蚀试验 |
China National Standards met |
English PDF |
GB/T 19746-2005 |
Corrosion of metals and alloys-Alternate immersion test in salt solution 金属和合金的腐蚀 盐溶液周浸试验 |
China National Standards met |
English PDF |
GB/T 19743-2005 |
Water atomized pure iron powder and alloyed steel powder for powder metallurgy 粉末冶金用水雾化纯铁粉、合金钢粉 |
China National Standards met |
English PDF |
GB/T 19739-2005 |
Mechanical vibration and shock-Hand-arm vibration-method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system 机械振动与冲击 手臂振动 手臂系统为负载时弹性材料振动传递率的测量方法 |
China National Standards met |
English PDF |
GB/T 15970.8-2005 |
Corrosion of metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments 金属和合金的腐蚀 应力腐蚀试验 第8部分:焊接试样的制备和应用 |
China National Standards met |
English PDF |
GB/T 14412-2005 |
Mechanical vibration and shock-Mechanical mounting of accelerometers 机械振动与冲击 加速度计的机械安装 |
China National Standards met |
English PDF |
GB/T 10561-2005 |
Steel-Determination of content of nonmetallic inclusions-Micrographic method using standards diagrams 钢中非金属夹杂物含量的测定--标准评级图显微检验法 |
China National Standards met |
English PDF |
GB/T 12553-2005 |
Fire performance requirements and test methods for fire fight vessels 消防船消防性能要求和试验方法 |
China National Standards met |
English PDF |
GB/Z 19736-2005 |
Electronic imaging-Guidance for selection of document image compression methods 电子成像 文件图像压缩方法选择指南 |
China National Standards met |
English PDF |
GB/T 19710-2005 |
Geographic Information-metadata 地理信息 元数据 |
China National Standards met |
English PDF |
GB 4569-2005 |
Limit and measurement method of noise emitted by stationary Motorcycles and Mopeds 摩托车和轻便摩托车 定置噪声限值及测量方法 |
China National Standards met |
English PDF |
GB 16169-2005 |
Limit and measurement method of noise emitted by accelerating Motorcycles and Mopeds 摩托车和轻便摩托车 加速行驶噪声限值及测量方法 |
China National Standards met |
English PDF |
GB 14763-2005 |
Limits and measurement methods for fuel evaporative Pollutants from heavy-duty vehicles equipped with P.I engines(Trap method) 装用点燃式发动机重型汽车 燃油蒸发污染物排放限值及测量方法(收集法) |
China National Standards met |
English PDF |
GB 11340-2005 |
Limits and measurement methods for crankcase pollutants From heavy-duty vehicles equipped with P.I engines 装用点燃式发动机重型汽车 曲轴箱污染物排放限值及测量方法 |
China National Standards met |
English PDF |
GB/T 19681-2005 |
The method for the determination of Sudan dyes in foods-High performance liquid chromatography 食品中苏丹红染料的检测方法 高效液相色谱法 |
China National Standards met |
English PDF |
GB/T 15812.1-2005 |
Catheters other than intravascular catheters-Part 1:Test methods for common properties 非血管内导管 第1部分:一般性能试验方法 |
China National Standards met |
English PDF |
GB/T 19808-2005 |
Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 |
China National Standards met |
English PDF |
GB/T 19720-2005 |
Platinum jewellery alloys-Determination of platinum and palladium-Gravimetric method after precipitation of diammonium hexachloroplatinate and dimethylglyoxime 铂合金首饰 铂、钯含量的测定 氯铂酸铵重量法 丁二酮肟重量法 |
China National Standards met |
English PDF |
GB/T 19719-2005 |
Jewellery-Determination of the release of nickel-method of spectrometry 首饰 镍释放量的测定 光谱法 |
China National Standards met |
English PDF |
GB/T 19718-2005 |
Jewellery-Determination of nickel content-method of flame atomic absorption spectrometry 首饰 镍含量的测定 火焰原子吸收光谱法 |
China National Standards met |
English PDF |
GB/T 19712-2005 |
Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法 |
China National Standards met |
English PDF |
GB/T 19700-2005 |
Test method of thermal property for marine heat exchanger 船用热交换器热工性能试验方法 |
China National Standards met |
English PDF |
GB/T 14649-2005 |
Test method for marine auxiliary boiler property 船用辅锅炉性能试验方法 |
China National Standards met |
English PDF |
GB/T 19687-2005 |
Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods) 闭孔塑料长期热阻变化的测定 实验室加速测试方法 |
China National Standards met |
English PDF |
GB/T 5170.16-2005 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test 电工电子产品环境试验设备 基本参数检定方法 稳态加速度试验用离心机 |
China National Standards met |
English PDF |
GB/T 5170.15-2005 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用液压振动台 |
China National Standards met |
English PDF |
GB/T 5170.13-2005 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用机械振动台 |
China National Standards met |
English PDF |
GB/T 2423.33-2005 |
Environmental testing for electric and electronic products Part 2:Test method Test Kca:High concentration sulfur dioxide 电工电子产品环境试验 第2部分:试验方法 试验Kca:高浓度二氧化硫试验 |
China National Standards met |
English PDF |
GB/T 307.2-2005 |
Rolling bearings-Measuring and gauging principles and methods 滚动轴承 测量和检验的原则及方法 |
China National Standards met |
English PDF |
GB/T 19675.2-2005 |
Specifications of flexible graphite gaskets reinforced with tanged metal sheet for pipe flanges 管法兰用金属冲齿板柔性石墨复合垫片 技术条件 |
China National Standards met |
English PDF |
GB/T 19675.1-2005 |
Dimensions of flexible graphite gaskets reinforced with tanged metal sheet for ripe flanges 管法兰用金属冲齿板柔性石墨复合垫片 尺寸 |
China National Standards met |
English PDF |
GB/T 19674.3-2005 |
Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with metal-to-metal sealing(type B) 液压管接头用螺纹油口和柱端 金属对金属密封柱端(B型) |
China National Standards met |
English PDF |
GB/T 12221-2005 |
metal valves-Face to face,end to end,center to face and center to end dimensions 金属阀门 结构长度 |
China National Standards met |
English PDF |
GB/Z 14429-2005 |
Telecontrol equipmet and systems Part1:General considerations Section3:Glossary 远动设备及系统 第1-3部分:总则 术语 |
China National Standards met |
English PDF |
GB/T 6907-2005 |
Analysis of water used in boil and cooling system-The sampling method for water 锅炉用水和冷却水分析方法 水样的采集方法 |
China National Standards met |
English PDF |
GB/T 12146-2005 |
Analysis of water used in boil and cooling system Determination of ammonia-Phenol method 锅炉用水和冷却水分析方法 氨的测定 苯酚法 |
China National Standards met |
English PDF |
GB/T 10233-2005 |
Basic testing method for low-voltage switchgear and controlgear assemblies 低压成套开关设备和电控设备基本试验方法 |
China National Standards met |
English PDF |
GB/T 18932.28-2005 |
method for the determination of tetracyclins antibiotics residues in honey--Enzyme-linked Immunosorbent Assay method 蜂蜜中四环素族抗生素残留量测定方法 酶联免疫法 |
China National Standards met |
English PDF |
GB/T 18932.27-2005 |
method for the determination of tylosin residue in honey--Enzyme-linked Immunosorbent Assay method 蜂蜜中泰乐菌素残留量测定方法 酶联免疫法 |
China National Standards met |
English PDF |
GB/T 18932.26-2005 |
method for the determination of metronidazole,ronidazole and dimetridazole residues in honey-Liquid chromatographic method 蜂蜜中甲硝哒唑、洛硝哒唑、二甲硝咪唑残留量的测定方法 液相色谱法 |
China National Standards met |
English PDF |
GB/T 18932.25-2005 |
method for the determination of penicillin G,penicillin V,nafcillin,oxacillin,cloxacillin,dicloxacillin residues in honey-LC-MS-MS method 蜂蜜中青霉素G、青霉素V、乙氧萘青霉素、苯唑青霉素、邻氯青霉素、双氯青霉素残留量的测定方法 液相色谱--串联质谱法 |
China National Standards met |
English PDF |
GB/T 18932.24-2005 |
method for the determination of the metabolite residues of furaltadon,nitrofurazone,nitrofurantoin and furazolidone in honey-liquid chromatography-tandem mass spectrometry method 蜂蜜中呋喃它酮、呋喃西林、呋喃妥因和呋喃唑酮代谢物残留量的测定方法 液湘色谱--串联质谱法 |
China National Standards met |
English PDF |
GB/T 19665-2005 |
General specification for electronic infrared imaging thermometer of body skin 电子红外成像人体表面测温仪通用规范 |
China National Standards met |
English PDF |
GB 11239.1-2005 |
Operation microscopes Part1:Requirements and test methods 手术显微镜 第1部分:要求和试验方法 |
China National Standards met |
English PDF |
GB/T 2419-2005 |
Test method for fluidity of cement mortar 水泥胶砂流动度测定方法 |
China National Standards met |
English PDF |
GB/T 1345-2005 |
The test sieving method for fineness of cement 水泥细度检验方法 筛析法 |
China National Standards met |
English PDF |
GB/T 12957-2005 |
Test method for activity of industrial waste slag used as addition to cement 用于水泥混合材的工业废渣活性试验方法 |
China National Standards met |
English PDF |
GB/T 5321-2005 |
Measurement of loss and efficiency for electrical machine by the calorimetric method 量热法测定电机的损耗和效率 |
China National Standards met |
English PDF |
GB 19636-2005 |
Saw tables for use as saw benches Tables for hand-held circular saws with a maximum saw-blade diameter of 315mm Safety requirements 用作圆锯台架的锯台 最大锯片直径为315 mm的手持式圆锯的锯台 安全要求 |
China National Standards met |
English PDF |
GB/T 2423.54-2005 |
Environmental testing for electric and electronic products-Part 2:Test methods-Test Xc:Fluid contamination 电工电子产品环境试验 第2部分:试验方法 试验Xc:流体污染 |
China National Standards met |
English PDF |
GB/T 2423.53-2005 |
Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands 电工电子产品环境试验 第2部分:试验方法 试验Xb:由手的磨擦造成标记和印刷文字的磨损 |
China National Standards met |
English PDF |
GB/T 19629-2005 |
Medical Electrical Equipment-Dosimeters with ionization chambers and/or semi-conductors as used in X-ray diagnostic imaging 医用电气设备 X射线诊断影像中使用的电离室和(或)半导体探测器剂量计 |
China National Standards met |
English PDF |
GB/T 19628.2-2005 |
Industrial wire screens woven wire cloth-Guide to the choice of aperture size and wire diameter combinations-Part 2:Preferred combination for woven wire cloth 工业用金属丝 网和金属丝编织网 网孔尺寸与金属丝直径组合选择指南 金属丝编织网的优先组合选择 |
China National Standards met |
English PDF |
GB/T 19611-2004 |
Tobacco and tobaccoproducts--Determination of maleic hydrazide residues UV Spectrophotometer method 烟草及烟草制品 抑芽丹残留量的测定 紫外分光光度法 |
China National Standards met |
English PDF |
GB/T 13596-2004 |
Tobacco and tobaccoproducts--Determination of organochlorine pesticide residues--Gas chromatographic method 烟草和烟草制品 有机氯农药残留量的测定 气相色谱法 |
China National Standards met |
English PDF |
GB/T 19603-2004 |
Test method for drop-proof properties ofdrop-proof plastic films 塑料无滴薄膜无滴性能试验方法 |
China National Standards met |
English PDF |
GB/T 7235-2004 |
Geometrical Product Specifications(GPS)--Methods for the assessment of departure from roundness--Measurement of variations in radius 产品几何量技术规范(GPS) 评定圆度误差的方法 半径变化量测量 |
China National Standards met |
English PDF |
GB/T 7234-2004 |
Geometrical Product Specifications(GPS)--Measurement of roundness--Terms,definitions and parameters of roundness 产品几何量技术规范(GPS) 圆度测量 术语、定义及参数 |
China National Standards met |
English PDF |
GB/T 7220-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surfaceroughness--Terminology--Measurement of surface roughness parameters 产品几何量技术规范(GPS) 表面结构 轮廓法 表面粗糙度 术语 参数测量 |
China National Standards met |
English PDF |
GB/T 5847-2004 |
Dimensional chain--methods of calculation 尺寸链 计算方法 |
China National Standards met |
English PDF |
GB/T 4380-2004 |
Assessment of departure from roundness--Two-and three-point methods 圆度误差的评定 两点、三点法 |
China National Standards met |
English PDF |
GB/T 19600-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Calibrationof contact(stylus)instruments 产品几何量技术规范(GPS) 表面结构 轮廓法 接触(触针)式仪器的校准 |
China National Standards met |
English PDF |
GB/T 1958-2004 |
Geometrical Product Specifications(GPS)--Geometrical tolerance--Verification prescription 产品几何量技术规范(GPS) 形状和位置公差 检测规定 |
China National Standards met |
English PDF |
GB/T 19067.2-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Measurement standards--Part 2:Software measurement standards 产品几何量技术规范(GPS) 表面结构 轮廓法测量标准 第2部分:软件测量标准 |
China National Standards met |
English PDF |
GB/T 18779.2-2004 |
Geometrical Product Specifications(GPS)--Inspection by measurement of workpieses and measuring equipment--Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第2部分:测量设备校准和产品检验中GPS测量的不确定度评定指南 |
China National Standards met |
English PDF |
GB/T 16857.5-2004 |
Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机 |
China National Standards met |
English PDF |
GB/T 19599.2-2004 |
Testing method for fishing nets of synthetic fibre--Size of netting 合成纤维渔网片试验方法 网片尺寸 |
China National Standards met |
English PDF |
GB/T 19599.1-2004 |
Testing method for fishing nets of synthetic fibre--Weight of netting 合成纤维渔网片试验方法 网片重量 |
China National Standards met |
English PDF |
GB/T 19587-2004 |
Determination of the specific surface area of solids by gas adsorption using the BET method 气体吸附BET法测定固态物质比表面积 |
China National Standards met |
English PDF |
GB/T 13221-2004 |
Nanometer powder--Determination of particle size distribution--Small angle X-ray scattering method 纳米粉末粒度分布的测定 X射线小角散射法 |
China National Standards met |
English PDF |
GB 15760-2004 |
metal-cutting machine tools--General safeguarding specification 金属切削机床 安全防护通用技术条件 |
China National Standards met |
English PDF |
GB/T 19565-2004 |
Pyranometer 总辐射表 |
China National Standards met |
English PDF |
GB/T 19563-2004 |
Experimental identification method for variety of soybean seed--ISSR 大豆种子品种鉴定实验方法 简单重复序列间区法 |
China National Standards met |
English PDF |
GB/T 19531.1-2004 |
Technical requirement for the observational environment of seismic stations--Part 1:Seismometry 地震台站观测环境技术要求 第1部分:测震 |
China National Standards met |
English PDF |
GB/T 18375.6-2004 |
Prosthetics--Structural testing of lower-limb prostheses--Part 6:Loading parameters of supplementary structural tests 假肢 下肢假肢的结构检验 第6部分:辅助结构检验中的加载参数 |
China National Standards met |
English PDF |
GB/T 5822.2-2004 |
Test method of petroleum ether insolubles in lubricating oil for railway locomotive diesel engine 铁路内燃机车柴油机油 石油醚不溶物测定方法 |
China National Standards met |
English PDF |
Find out:14572Items | To Page of: First -Previous-Next -Last | [116] [117] [118] [119] [120] [121] [122] |