Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 33933.3-2017 |
Natural stone mining equipments—Safety requirements—Part 3: Arm type sawing machine 天然石开采设备 安全要求 第3部分：臂式锯切机 |
China National Standards min |
 English PDF |
| GB/T 33936-2017 |
mine hoists—Assessment specification for recycle 矿井提升机 回收评估规范 |
China National Standards min |
English PDF |
| GB/T 33918-2017 |
Fragrance/Flavor substances－Determination of peroxide value 香料 过氧化值的测定 |
China National Standards min |
English PDF |
| GB/T 12454-2017 |
Method of evaluating luminous environment 光环境评价方法 |
China National Standards min |
English PDF |
| GB/T 33933.1-2017 |
Natural stone mining equipments—Safety requirements—Part 1:Disk sawing machine 天然石开采设备 安全要求 第1部分：圆盘式锯切机 |
China National Standards min |
English PDF |
| GB/T 15670.18-2017 |
Toxicological test methods for pesticides registration—Part 18: Rodent dominant lethal test 农药登记毒理学试验方法 第18部分：啮齿类动物显性致死试验 |
China National Standards min |
English PDF |
| GB/T 33948.2-2017 |
Method for chemical analysis of copper-steel composite metal—Part 2：Determination of zinc content—Na2EDTA titration method 铜-钢复合金属化学分析方法 第2部分：锌含量的测定 Na2EDTA滴定法 |
China National Standards min |
English PDF |
| GB/T 33905.3-2017 |
Intelligent sensor—Part 3: Terminology 智能传感器 第3部分：术语 |
China National Standards min |
English PDF |
| GB/T 22381-2017 |
Cable connections between gas-insulated metal-enclosed switchgear for rated voltages equal to and above 72.5kV and fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations 额定电压72.5kV及以上气体绝缘金属封闭开关设备与充流体及挤包绝缘电力电缆的连接 充流体及干式电缆终端 |
China National Standards min |
English PDF |
| GB/T 33950-2017 |
The continous roll-casting strips of aluminium and aluminium alloy 铝及铝合金铸轧带材 |
China National Standards min |
English PDF |
| GB/T 33948.1-2017 |
Method for chemical analysis of copper-steel composite metal—Part 1：Determination of copper content—Iodine titration method 铜-钢复合金属化学分析方法 第1部分：铜含量的测定 碘量法 |
China National Standards min |
English PDF |
| GB/T 33921-2017 |
Underground rubber-tyred mining machines—Performance requirements and test procedures for brake systems 地下轮胎式采矿车辆 制动系统的性能要求和试验方法 |
China National Standards min |
English PDF |
| GB/T 8423.5-2017 |
Petroleum and natural gas industries terminology—Part 5：Equipment and material 石油天然气工业术语 第5部分：设备与材料 |
China National Standards min |
English PDF |
| GB/T 33984-2017 |
Motor soft-start device—Terminology 电动机软起动装置 术语 |
China National Standards min |
English PDF |
| GB/T 33952-2017 |
Copper clad aluminum tube 铜包铝管 |
China National Standards min |
English PDF |
| GB/T 8188-2017 |
Reciprocating internal combustion engines—Emissions terminology and nomenclature 往复式内燃机 排放术语和定义 |
China National Standards min |
English PDF |
| GB/T 15969.3-2017 |
Programmable controllers—Part 3: Programming languages 可编程序控制器 第3部分：编程语言 |
China National Standards min |
English PDF |
| GB/T 13213-2017 |
Canned pork mince 猪肉糜类罐头 |
China National Standards min |
English PDF |
| GB/T 6031-2017 |
Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶 硬度的测定(10IRHD~100IRHD) |
China National Standards min |
English PDF |
| GB 24849-2017 |
minimum allowable values of energy efficiency and energy efficiency grades for household and similar microwave ovens 家用和类似用途微波炉能效限定值及能效等级 |
China National Standards min |
English PDF |
| GB/T 13477.15-2017 |
Test method for building sealants—Part 15：Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to water 建筑密封材料试验方法 第15部分：经过热、透过玻璃的人工光源和水曝露后粘结性的测定 |
China National Standards min |
English PDF |
| GB/T 13477.11-2017 |
Test method for building sealants—Part 11：Determination of tensile properties at maintained extension after immersion in wates 建筑密封材料试验方法 第11部分：浸水后定伸粘结性的测定 |
China National Standards min |
English PDF |
| GB/T 33837-2017 |
Coated glass fiber products—Determination of the tension-tension fatigue properties 玻璃纤维涂覆制品 拉-拉疲劳性能的测定 |
China National Standards min |
English PDF |
| GB/T 13477.4-2017 |
Test method for building sealants—Part 4：Determination of extrudability of one-component sealants 建筑密封材料试验方法 第4部分：原包装单组分密封材料挤出性的测定 |
China National Standards min |
English PDF |
| GB/T 13477.9-2017 |
Test method for building sealants—Part 9：Determination of adhesion/cohesion properties after immersion in water 建筑密封材料试验方法 第9部分：浸水后拉伸粘结性的测定 |
China National Standards min |
English PDF |
| GB/T 33832-2017 |
Determination of water resistance of glass fiber 玻璃纤维耐水性的测定 |
China National Standards min |
English PDF |
| GB/T 13477.3-2017 |
Test method for building sealants—Part 3：Determination of extrudability of sealants using standardized apparatus 建筑密封材料试验方法 第3部分：使用标准器具测定密封材料挤出性的方法 |
China National Standards min |
English PDF |
| GB/T 33831-2017 |
Coated glass fiber products—Determination of resistance to creasing and folding behaviour 玻璃纤维涂覆制品 耐压折性能的测定 |
China National Standards min |
English PDF |
| GB/T 13477.10-2017 |
Test method for building sealants—Part 10：Determination of tensile properties at maintained extension 建筑密封材料试验方法 第10部分：定伸粘结性的测定 |
China National Standards min |
English PDF |
| GB/T 13477.8-2017 |
Test method for building sealants—Part 8：Determination of tensile properties 建筑密封材料试验方法 第8部分：拉伸粘结性的测定 |
China National Standards min |
English PDF |
| GB/T 33815-2017 |
Technical specification for wastewater treatment of iron ore mining and mineral processing enterprises 铁矿石采选企业污水处理技术规范 |
China National Standards min |
English PDF |
| GB/T 33844-2017 |
Information technology—Biometrics—Tenprint capture using biometric application programming interface(BioAPI) 信息技术 生物特征识别 用于生物特征十指指纹采集应用编程接口（BioAPI） |
China National Standards min |
English PDF |
| GB/T 33842.2-2017 |
Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 2: Finger minutiae data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第2部分：指纹细节点数据 |
China National Standards min |
English PDF |
| GB/T 33847-2017 |
Information technology—Middleware terminology 信息技术 中间件术语 |
China National Standards min |
English PDF |
| GB/T 33827-2017 |
Determination of magnetic impurities in anode nanomaterials for Li-ion battery 锂电池用纳米负极材料中磁性物质含量的测定方法 |
China National Standards min |
English PDF |
| GB/T 33828-2017 |
Determination of contents of Fe(Ⅲ)in Nano lithium iron phosphate 纳米磷酸铁锂中三价铁含量的测定方法 |
China National Standards min |
English PDF |
| GB/T 33858-2017 |
Guide for circular economy evaluating—Aluminium industry 循环经济评价 铝行业 |
China National Standards min |
English PDF |
| GB/T 6725-2017 |
General requirements of cold forming steel sections 冷弯型钢通用技术要求 |
China National Standards min |
English PDF |
| GB/T 33817-2017 |
Method for determination of the carbon content on the inner surface of copper and copper-alloy tube 铜及铜合金管材内表面碳含量的测定方法 |
China National Standards min |
English PDF |
| GB/T 8753.1-2017 |
Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1：Measurement of the loss of mass after immersion in acid solution(s) 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第1部分：酸浸蚀失重法 |
China National Standards min |
English PDF |
| GB/T 33824-2017 |
Aluminum and Aluminum alloys plates, sheets and strips for cans and caps of new energy power batteries 新能源动力电池壳及盖用铝及铝合金板、带材 |
China National Standards min |
English PDF |
| GB/T 33823-2017 |
Aluminum alloy die forgings for control arms of passenger vehicles 乘用车控制臂用铝合金模锻件 |
China National Standards min |
English PDF |
| GB/T 27677-2017 |
Aluminium hardeners 铝中间合金 |
China National Standards min |
English PDF |
| GB/T 22033-2017 |
Information technology—Terminology for embedded systems 信息技术 嵌入式系统术语 |
China National Standards min |
English PDF |
| GB/T 33776.4-2017 |
Forestry internet of things—Part 4: General specification of hand-held intelligent terminal 林业物联网 第4部分：手持式智能终端通用规范 |
China National Standards min |
English PDF |
| GB/T 6723-2017 |
Cold forming open section steel for general structure 通用冷弯开口型钢 |
China National Standards min |
English PDF |
| GB/T 4722-2017 |
Test methods for rigid copper clad laminates for printed circuits board 印制电路用刚性覆铜箔层压板试验方法 |
China National Standards min |
English PDF |
| GB/T 13842-2017 |
Neodymium-doped Yttrium Aluminum Garnet laser rods 掺钕钇铝石榴石激光棒 |
China National Standards min |
English PDF |
| GB/T 5541-2017 |
Disperse dyes—Determination of stability of dispersion at high temperature—Filter test of double filter papers 分散染料 高温分散稳定性的测定 双层滤纸过滤法 |
China National Standards min |
English PDF |
| GB/T 33788-2017 |
Reactive dyes—Determination of shade and relative strength—Low salt dyeing method 反应染料 色光和强度的测定 低盐染色法 |
China National Standards min |
English PDF |
| GB/T 33792-2017 |
2,4-Diaminobenzenesulfonic acid sodium salt 2,4-二氨基苯磺酸钠 |
China National Standards min |
English PDF |
| GB/T 33799-2017 |
Determination of the bond strength of adhesive in engineering-plastic joints 工程塑料用胶粘剂对接强度的测定 |
China National Standards min |
English PDF |
| GB/T 33795-2017 |
Reactive dyes—Determination of hydrolysis rate 反应染料 水解速率的测定 |
China National Standards min |
English PDF |
| GB/T 5540-2017 |
Disperse dyes—Determination of dispersibility—Filter test of double filter papers 分散染料 分散性能的测定 双层滤纸过滤法 |
China National Standards min |
English PDF |
| GB/T 33797-2017 |
Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas 塑料 在高固体份堆肥条件下最终厌氧生物分解能力的测定 采用分析测定释放生物气体的方法 |
China National Standards min |
English PDF |
| GB 25327-2017 |
The norm of energy consumption per unit products of alumina 氧化铝单位产品能源消耗限额 |
China National Standards min |
English PDF |
| GB 12021.6-2017 |
minimum allowable values of energy efficiency and energy efficiency grades for electric rice cookers 电饭锅能效限定值及能效等级 |
China National Standards min |
English PDF |
| GB/T 33626.2-2017 |
Pneumatic lutricators—Part 2:Test methods to determine the main characteristics to be included in supplier’s literature 气动油雾器 第2部分：评定商务文件中包含的主要特性的试验方法 |
China National Standards min |
English PDF |
| GB/T 17623-2017 |
Determination of componental contents of gases dissolved in insulating oil by gas chromatography method 绝缘油中溶解气体组分含量的气相色谱测定法 |
China National Standards min |
English PDF |
| GB/T 14541-2017 |
Guide for maintenance and supervision of in-service mineral turbine oil used for power plants 电厂用矿物涡轮机油维护管理导则 |
China National Standards min |
English PDF |
| GB/T 7596-2017 |
In-service quality criteria of mineral turbine oils used in power plants 电厂运行中矿物涡轮机油质量 |
China National Standards min |
English PDF |
| GB/T 33609-2017 |
Flexible cellular polymeric materials—Determination of hysteresis loss 软质泡沫聚合材料 滞后损失试验方法 |
China National Standards min |
English PDF |
| GB/T 18049-2017 |
Ergonomics of the thermal environment—Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria 热环境的人类工效学 通过计算PMV和PPD指数与局部热舒适准则对热舒适进行分析测定与解释 |
China National Standards min |
English PDF |
| GB/T 24218.17-2017 |
Textiles—Test methods for nonwovens—Part 17: Determination of resistance to penetration by water (spray impact) 纺织品 非织造布试验方法 第17部分：抗渗水性的测定（喷淋冲击法） |
China National Standards min |
English PDF |
| GB/T 33610.2-2017 |
Textiles—Determination of deodorant property—Part 2:Detector tube method 纺织品 消臭性能的测定 第2部分：检知管法 |
China National Standards min |
English PDF |
| GB/T 33745-2017 |
Internet of things—Terminology 物联网 术语 |
China National Standards min |
English PDF |
| GB/T 24218.16-2017 |
Textiles—Test methods for nonwovens—Part 16: Determination of resistance to penetration by water(hydrostatic pressure) 纺织品 非织造布试验方法 第16部分：抗渗水性的测定(静水压法) |
China National Standards min |
English PDF |
| GB/T 33709-2017 |
Mobile laboratory—Guidance on dissemination and traceability of the value of equipment 移动实验室 仪器设备量值溯源与传递指南 |
China National Standards min |
English PDF |
| GB/T 33647-2017 |
Determination of silicon content in motor gasoline—Inductively coupled plasma optical emission spectrometry (ICP-OES) 车用汽油中硅含量的测定 电感耦合等离子体发射光谱法 |
China National Standards min |
English PDF |
| GB/T 33733-2017 |
Terminology and classification for the kitchen and sanitary ware fittings 厨卫五金产品术语与分类 |
China National Standards min |
English PDF |
| GB/T 16845-2017 |
Dust collector—Terminology 除尘器 术语 |
China National Standards min |
English PDF |
| GB/T 6002.15-2017 |
Textile machinery terminology—Part 15:Compact spinning device 纺织机械术语 第15部分：集聚纺纱装置 |
China National Standards min |
English PDF |
| GB/T 33584.3-2017 |
Seawater quality requirements and analysis methods for seawater cooling system—Part 3: Determination of chloride 海水冷却水质要求及分析检测方法 第3部分：氯化物的测定 |
China National Standards min |
English PDF |
| GB/T 33584.6-2017 |
Seawater quality requirements and analysis methods for seawater cooling system—Part 6: Determination of heterotrophic bacteria 海水冷却水质要求及分析检测方法 第6部分：异养菌的测定 |
China National Standards min |
English PDF |
| GB/T 33584.2-2017 |
Seawater quality requirements and analysis methods for seawater cooling system—Part 2: Determination of zinc 海水冷却水质要求及分析检测方法 第2部分：锌的测定 |
China National Standards min |
English PDF |
| GB/T 33611-2017 |
Textiles—Determination of short chain 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylate 纺织品 短链对特辛基苯酚乙氧基化物的测定 |
China National Standards min |
English PDF |
| GB/T 33732-2017 |
Textiles—Determination of resistance to water penetration—Impact penetration test 纺织品 抗渗水性的测定 冲击渗透试验 |
China National Standards min |
English PDF |
| GB/T 20042.1-2017 |
Proton exchange membrane fuel cell—Part 1: Terminology 质子交换膜燃料电池 第1部分：术语 |
China National Standards min |
English PDF |
| GB/Z 24294.4-2017 |
Information security technology—Guide of implementation for Internet-based e-government information security—Part 4: Defense for terminal security 信息安全技术 基于互联网电子政务信息安全实施指南 第4部分：终端安全防护 |
China National Standards min |
English PDF |
| GB/T 33590.2-2017 |
Technical specification of smart grid operation and control systems—Part 2: Terminology 智能电网调度控制系统技术规范 第2部分：术语 |
China National Standards min |
English PDF |
| GB/T 33649-2017 |
Determination of oxygenates and aniline compounds in motor gasoline—Gas chromatography 车用汽油中含氧化合物和苯胺类化合物的测定 气相色谱法 |
China National Standards min |
English PDF |
| GB/T 33646-2017 |
Determination of the ester compounds in motor rasoline—Gas chromatography 车用汽油中酯类化合物的测定 气相色谱法 |
China National Standards min |
English PDF |
| GB/T 33648-2017 |
Test method for identification and determination of specific non-regular additives in motor gasoline—Infrared spectroscopic method 车用汽油中典型非常规添加物的识别与测定 红外光谱法 |
China National Standards min |
English PDF |
| GB/T 33686-2017 |
General rules for analytical and testing methods of coal mine water 煤矿水水质分析的一般规定 |
China National Standards min |
English PDF |
| GB/T 33584.5-2017 |
Seawater quality requirements and analysis methods for seawater cooling system—Part 5: Determination of dissolved solid 海水冷却水质要求及分析检测方法 第5部分：溶解固形物的测定 |
China National Standards min |
English PDF |
| GB/T 33584.1-2017 |
Seawater quality requirements and analysis method for seawater cooling system—Part 1:Determination of calcium and magnesium 海水冷却水质要求及分析检测方法 第1部分：钙、镁离子的测定 |
China National Standards min |
English PDF |
| GB/T 33720-2017 |
Accelerated test method of luminous flux depreciation for LED lighting products LED照明产品光通量衰减加速试验方法 |
China National Standards min |
English PDF |
| GB/T 33741-2017 |
Mobile payment—Technical requirements for contactless reader terminal based on 2.45GHz range controlled communication technology 手机支付 基于2.45GHz RCC（限域通信）技术的非接触式读写器终端技术要求 |
China National Standards min |
English PDF |
| GB/T 33584.4-2017 |
Seawater quality requirements and analysis methods for seawater cooling system—Part 4: Determination of sulfate 海水冷却水质要求及分析检测方法 第4部分：硫酸盐的测定 |
China National Standards min |
English PDF |
| GB/T 33721-2017 |
Reliability test methods for LED luminaries LED灯具可靠性试验方法 |
China National Standards min |
English PDF |
| GB/T 33601-2017 |
Power grid equipment common model naming specification 电网设备通用模型数据命名规范 |
China National Standards min |
English PDF |
| GB/T 5687.4-2016 |
Nitrogen-bearing ferrochromium and nitride ferrochrome with high nitrogen content—Determination of nitrogen content—The distillation-neutralization titration method 氮化铬铁和高氮铬铁 氮含量的测定 蒸馏-中和滴定法 |
China National Standards min |
English PDF |
| GB 5009.138-2017 |
National food safety standard - Determination of nickel in food 食品安全国家标准 食品中镍的测定 |
China National Standards min |
English PDF |
| GB 5009.93-2017 |
National food safety standard - Determination of selenium in food 食品安全国家标准 食品中硒的测定 |
China National Standards min |
English PDF |
| GB 5009.14-2017 |
National food safety standard - Determination of Zinc in Food 食品安全国家标准 食品中锌的测定 |
China National Standards min |
English PDF |
| GB 5009.91-2017 |
National food safety standard - Determination of potassium and sodium in food 食品安全国家标准 食品中钾、钠的测定 |
China National Standards min |
English PDF |
| GB 5009.182-2017 |
National food safety standard - Determination of aluminum in food 食品安全国家标准 食品中铝的测定 |
China National Standards min |
English PDF |
| GB 5009.241-2017 |
National food safety standard - Determination of magnesium in food 食品安全国家标准 食品中镁的测定 |
China National Standards min |
English PDF |
| GB 5009.242-2017 |
National food safety standard - Determination of manganese in food 食品安全国家标准 食品中铜的测定 |
China National Standards min |
English PDF |
| GB 5009.12-2017 |
National food safety standard - Determination of lead in food 食品安全国家标准 食品中铅的测定 |
China National Standards min |
English PDF |
| Find out:11488Items | To Page of: First -Previous-Next -Last | [26] [27] [28] [29] [30] [31] [32] |
+86-755-25831330
