GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 2514-2008 |
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces 液压传动 四油口方向控制阀安装面 |
China National Standards p |
English PDF |
GB/T 21471-2008 |
Machining allowances and tolerances for steel open die forgings on hammer - Shafts 锤上钢质自由锻件机械加工余量与公差 轴类 |
China National Standards p |
English PDF |
GB/T 21470-2008 |
Machining allowances and tolerances for steel open die forgings on hammer - Disks, columns, rings and seamless cylindrical sleeves 锤上钢质自由锻件机械加工余量与公差 盘、柱、环、筒类 |
China National Standards p |
English PDF |
GB/T 21469-2008 |
Machining allowances and tolerances for steel open die forgings on hammer - General requirement 锤上钢质自由锻件机械加工余量与公差 一般要求 |
China National Standards p |
English PDF |
GB/T 21468-2008 |
pallet stackers and high-lift platform trucks - Stability tests 托盘堆垛车和高起升平台堆垛车 稳定性试验 |
China National Standards p |
English PDF |
GB/T 21467-2008 |
Industrial trucks operating in special condition of stacking with mast titled forward - Additional stability test 工业车辆在门架前倾的特定条件下堆垛作业 附加稳定性试验 |
China National Standards p |
English PDF |
GB/T 21466.3-2008 |
Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第3部分:许用的运行参数 |
China National Standards p |
English PDF |
GB/T 21466.2-2008 |
Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第2部分:计算过程中所用函数 |
China National Standards p |
English PDF |
GB/T 21466.1-2008 |
Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings -- Part 1: Calculation procedure 稳态条件下流体动压径向滑动轴承 圆柱滑动轴承 第1部分:计算过程 |
China National Standards p |
English PDF |
GB/T 14693-2008 |
Non-destructive testing - Symbolic representation on drawings 无损检测 符号表示法 |
China National Standards p |
English PDF |
GB/T 19582.3-2008 |
Modbus industrial automation network specification - Part 3: Modbus protocol implementation guide over TCP/IP 基于Modbus协议的工业自动化网络规范 第3部分:Modbus协议在TCP/IP上的实现指南 |
China National Standards p |
English PDF |
GB/T 19582.2-2008 |
Modbus industrial automation network specification-Part 2:Modbus protocol implementation guide over serial link 基于Modbus协议的工业自动化网络规范 第2部分:Modbus协议在串行链路上的实现指南 |
China National Standards p |
English PDF |
GB/T 19582.1-2008 |
Modbus industrial automation network specification - Part 1: Modbus application protocol 基于Modbus协议的工业自动化网络规范 第1部分:Modbus应用协议 |
China National Standards p |
English PDF |
GB/T 21474-2008 |
Guideline for the assessment on the reuse and recycling system of waste electrical and electronic equipment 废弃电子电气产品再使用及再生利用体系评价导则 |
China National Standards p |
English PDF |
GB 18447.1-2008 |
Safety requirements for tractors - part 1:Wheeled tractors 拖拉机 安全要求 第1部分:轮式拖拉机 |
China National Standards p |
English PDF |
GB/T 4649-2008 |
Ethylene glycol for industrial Use-Specification 工业用乙二醇 |
China National Standards p |
English PDF |
GB/T 21464-2008 |
Rubber - Determination of 5-Ethylidenenorbornene(ENB)or Dicyclopentadiene(DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers 橡胶 乙烯-丙烯-二烯烃(EPDM)三元共聚物中5-乙叉降冰片烯(ENB)或双环戊二烯(DCPD)含量的测定 |
China National Standards p |
English PDF |
GB/T 21463-2008 |
Rubber-polychloroprene latex - Determination of alkalinity 氯丁二烯橡胶胶乳碱度的测定 |
China National Standards p |
English PDF |
GB/T 21462-2008 |
Evaluation procedure of Chloroprene Rubber(CR) 氯丁二烯橡胶(CR) 评价方法 |
China National Standards p |
English PDF |
GB/T 21461.2-2008 |
plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards p |
English PDF |
GB/T 21460.2-2008 |
plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards p |
English PDF |
GB/T 14571.4-2008 |
Ethylene glycol for industrial use - Determination of ultraviolet transmittance - Ultraviolet spectrophotometric method 工业用乙二醇紫外透光率的测定 紫外分光光度法 |
China National Standards p |
English PDF |
GB/T 14571.3-2008 |
Ethylene glycol for industrial use - Determination of content of total aldehydes present - Spectrophotometric method 工业用乙二醇中醛含量的测定 分光光度法 |
China National Standards p |
English PDF |
GB/T 14563-2008 |
Specification and test method of Kaolin clay 高岭土及其试验方法 |
China National Standards p |
English PDF |
GB/T 12670-2008 |
polypropylene (PP) resin 聚丙烯(PP)树脂 |
China National Standards p |
English PDF |
GB/T 21458-2008 |
Mobile cranes - presentation of rated capacity charts 流动式起重机 额定起重量图表 |
China National Standards p |
English PDF |
GB/T 21457-2008 |
Cranes and related equipment - Accuracy requirements for measuring parameters during testing 起重机和相关设备 试验中参数的测量精度要求 |
China National Standards p |
English PDF |
GB 21454-2008 |
The minimum allowable values of the IpLV and energy efficiency grades for multi-connected air-condition(heat pump) unit 多联式空调(热泵)机组能效限定值及能源效率等级 |
China National Standards p |
English PDF |
GB/T 21437.2-2008 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only 道路车辆 由传导和耦合引起的电骚扰 第2部分:沿电源线的电瞬态传导 |
China National Standards p |
English PDF |
GB/T 21436-2008 |
parking distance monitoring & warning device for motovehicle 汽车泊车测距警示装置 |
China National Standards p |
English PDF |
GB/T 21499-2008 |
Rice - Determinaton of the potential milling yield from paddy and from husked rice 大米 稻谷和糙米潜在出米率的测定 |
China National Standards p |
English PDF |
GB/T 21489-2008 |
Truck dumper 散粮汽车卸车装置 |
China National Standards p |
English PDF |
GB/T 3410.1-2008 |
Instrument for dam monitoring joint meter - part 1: Unbonded elastic wire resistance joint meter 大坝监测仪器 测缝计 第1部分:差动电阻式测缝计 |
China National Standards p |
English PDF |
GB/T 3408.1-2008 |
Instrument for dam monitoring strain meter - part 1: Unbonded elastic wire resistance strain meter 大坝监测仪器 应变计 第1部分:差动电阻式应变计 |
China National Standards p |
English PDF |
GB/T 21444-2008 |
Naked carp of Qinghai lake 青海湖裸鲤 |
China National Standards p |
English PDF |
GB/T 21443-2008 |
Bay scallop 海湾扇贝 |
China National Standards p |
English PDF |
GB/T 21442-2008 |
Farrer’s scallop 栉孔扇贝 |
China National Standards p |
English PDF |
GB/T 21440.1-2008 |
Instument for dam monitoring settlement gauge - part 1: Hydraulic overflow settlement gauge 大坝监测仪器 沉降仪 第1部分:水管式沉降仪 |
China National Standards p |
English PDF |
GB/T 21438-2008 |
parent scallop of farrers scallop 栉孔扇贝 亲贝 |
China National Standards p |
English PDF |
GB/T 16872-2008 |
Farrer’s scallop - Seedling 栉孔扇贝 苗种 |
China National Standards p |
English PDF |
GB/T 594-2008 |
Marine forged steel male thread stop valves 船用外螺纹锻钢截止阀 |
China National Standards p |
English PDF |
GB/T 7386-2008 |
Co-ordination of dimension in ships’ accommodation 船舶起居舱室的尺度协调 |
China National Standards p |
English PDF |
GB/T 17434-2008 |
Specifications for marine fire-resistant windows 船用耐火窗技术条件 |
China National Standards p |
English PDF |
GB/T 14654-2008 |
Elastic damping leaf damper 弹性阻尼簧片减振器 |
China National Standards p |
English PDF |
GB/T 14653-2008 |
Flexible link coupling 挠性杆联轴器 |
China National Standards p |
English PDF |
GB/T 12922-2008 |
Elastic damping leaf coupling 弹性阻尼簧片联轴器 |
China National Standards p |
English PDF |
GB/T 10841-2008 |
Marine shapes 船用号型 |
China National Standards p |
English PDF |
GB/T 21459.5-2008 |
Specification guidelines for fungal pesticide baits(RB) 真菌农药饵剂产品标准编写规范 |
China National Standards p |
English PDF |
GB/T 21459.4-2008 |
Specification guidelines for fungal oil miscible flowable concentrates(DF) 真菌农药油悬浮剂产品标准编写规范 |
China National Standards p |
English PDF |
GB/T 21459.3-2008 |
Specification guidelines for fungal pesticide wettable powder(WP) 真菌农药可湿性粉剂产品标准编写规范 |
China National Standards p |
English PDF |
GB/T 21459.2-2008 |
Specification guidelines for fungal pesticide powders(DP) 真菌农药粉剂产品标准编写规范 |
China National Standards p |
English PDF |
GB/T 21459.1-2008 |
Specification guidelines for fungal pesticide technical concentrates(TK) 真菌农药母药产品标准编写规范 |
China National Standards p |
English PDF |
GB/T 21453-2008 |
General principles of stipulating the guidelines for cleaner production audit Industry sectors 工业清洁生产审核指南编制通则 |
China National Standards p |
English PDF |
GB/T 8928-2008 |
Standard test method for density of semi-solid and solid asphalt 固体和半固体石油沥青密度测定法 |
China National Standards p |
English PDF |
GB/T 8927-2008 |
petroleum and liquid petroleum products-Temperature measurement - Manual methods 石油和液体石油产品温度测量 手工法 |
China National Standards p |
English PDF |
GB/T 5018-2008 |
Standard test method for determining corrosion preventive properties of lubricating greases 润滑脂防腐蚀性试验法 |
China National Standards p |
English PDF |
GB/T 21452-2008 |
petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method 中间馏分燃料颗粒物含量的测定 实验室过滤法 |
China National Standards p |
English PDF |
GB/T 21451.4-2008 |
petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 4: Measurement of temperature in atmospheric tanks 石油和液体石油产品 储罐中液位和温度自动测量法 第4部分: 常压罐中的温度测量 |
China National Standards p |
English PDF |
GB/T 21450-2008 |
Crude petroleum and petroleum products - Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1074 kg/m3 原油和石油产品 密度在638kg/m3到1074 kg/m3范围内的烃压缩系数 |
China National Standards p |
English PDF |
GB/T 11964-2008 |
Test method for loss on heating of asphalt 石油沥青蒸发损失测定法 |
China National Standards p |
English PDF |
GB/T 11148-2008 |
Test method for solubility of asphalt 石油沥青溶解度测定法 |
China National Standards p |
English PDF |
GB/T 11143-2008 |
Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water 加抑制剂矿物油在水存在下防锈性能试验法 |
China National Standards p |
English PDF |
GB/T 21448-2008 |
Specification of cathodic protection for underground steel pipelines 埋地钢质管道阴极保护技术规范 |
China National Standards p |
English PDF |
GB/T 21447-2008 |
Specification for external corrosion control for steel pipeline 钢质管道外腐蚀控制规范 |
China National Standards p |
English PDF |
GB/T 21445.2-2008 |
petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications 石油天然气工业 海底生产系统的设计和操作 第2部分:用于海底和海上的挠性管系统 |
China National Standards p |
English PDF |
GB/T 21383-2008 |
Coefficient of initial retroreflected luminance of newly applied pavement marking and test method 新划路面标线初始逆反射亮度系数及测试方法 |
China National Standards p |
English PDF |
GB/T 21382-2008 |
Specification for optical requirements of photoluminescent (phosphorescent) safety marking 光致发光(磷光)安全标记光学性能要求 |
China National Standards p |
English PDF |
GB/T 21381-2008 |
Coding rules for entity identification code of traffic management geographical information - City road 交通管理地理信息实体标识编码规则 城市道路 |
China National Standards p |
English PDF |
GB/T 21380-2008 |
Nighttime photometric performance and test method of retroreflective pedestrian markings 行人反光标识夜间光度性能及测试方法 |
China National Standards p |
English PDF |
GB 50041-2008 |
Code for design of boiler plant 锅炉房设计规范 |
China National Standards p |
English PDF |
GB/T 7727.1-2008 |
General terminology for ship - Part 1: Comprehension 船舶通用术语 第1部分:综合 |
China National Standards p |
English PDF |
GB/T 21396-2008 |
Footwear - Test methods for whole shoe - -Upper sole adhesion 鞋类 成鞋试验方法 帮底粘合强度 |
China National Standards p |
English PDF |
GB/T 21393-2008 |
The methods of statistics and analysis for energy consumption of highway transportation 公路运输能源消耗统计及分析方法 |
China National Standards p |
English PDF |
GB/T 21392-2008 |
The methods of statistics and analysis of energy consumption in shipping transportation 船舶运输能源消耗统计及分析方法 |
China National Standards p |
English PDF |
GB/T 19233-2008 |
Measurement methods of fuel consumption for light-duty vehicles 轻型汽车燃料消耗量试验方法 |
China National Standards p |
English PDF |
GB/T 1853-2008 |
Marine flanged cast steel overboard stop check valve 船用法兰铸钢舷侧截止止回阀 |
China National Standards p |
English PDF |
GB/T 16887-2008 |
Safety requirements for sleeper bus construction 卧铺客车结构安全要求 |
China National Standards p |
English PDF |
GB/T 12920-2008 |
General specification for pneumatic system of ship 船用气动系统通用技术条件 |
China National Standards p |
English PDF |
GB/T 1241-2008 |
Marine forged steel male thread stop-check valves 船用外螺纹锻钢截止止回阀 |
China National Standards p |
English PDF |
GB/T 11034-2008 |
Marine electric reciprocating pump 船用电动往复泵 |
China National Standards p |
English PDF |
GB/T 10831-2008 |
Marine electric eccentric screw pump 船用电动单螺杆泵 |
China National Standards p |
English PDF |
GB 50442-2008 |
Code for urban public facilities planning 城市公共设施规划规范 |
China National Standards p |
English PDF |
GB/T 9465-2008 |
Vehicle-mounted mobile elevating work platform 高空作业车 |
China National Standards p |
English PDF |
GB/T 6236-2008 |
Tractors and machinery for agricultural and forestry - Seat index point 农林拖拉机和机械 驾驶座标志点 |
China National Standards p |
English PDF |
GB/T 6072.1-2008 |
Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use 往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求 |
China National Standards p |
English PDF |
GB/T 5143-2008 |
lndustrial trucks - Overhead guards - Specification and testing 工业车辆 护顶架 技术要求和试验方法 |
China National Standards p |
English PDF |
GB/T 2780-2008 |
Drawbars for agricultural tractors - Types dimensionsand mounting requirements 农业拖拉机 牵引装置型式尺寸和安装要求 |
China National Standards p |
English PDF |
GB/T 21407-2008 |
Doubly fed variable speed constant frequency wind turbine 双馈式变速恒频风力发电机组 |
China National Standards p |
English PDF |
GB/T 21405-2008 |
Reciprocating intenal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求 |
China National Standards p |
English PDF |
GB/T 21404-2008 |
Internal combustion engine - Determination and method for the measurement of engine power - General requirements 内燃机 发动机功率的确定和测量方法 一般要求 |
China National Standards p |
English PDF |
GB/T 21403-2008 |
Irrigation equipment - Differential pressure Venturi-type liquid additive injectors 喷灌设备 文丘里式差压液体添加射流器 |
China National Standards p |
English PDF |
GB/T 21402-2008 |
Agricultural irrigation equipment-Control heads 农业灌溉设备 水头控制器 |
China National Standards p |
English PDF |
GB/T 21401-2008 |
Agricultural irrigation equipment - Aluminium irrigation tubes 农业灌溉设备 铝灌溉管 |
China National Standards p |
English PDF |
GB/T 21400.2-2008 |
Traveller irrigation machines - part 2: Softwall hose and couplings - Test methods 绞盘式喷灌机 第2部分: 软管和接头 试验方法 |
China National Standards p |
English PDF |
GB/T 21400.1-2008 |
Traveller irrigation machines - part 1: Operational characteristics and laboratory and field test methods 绞盘式喷灌机 第1部分:运行特性及实验室和田间试验方法 |
China National Standards p |
English PDF |
GB/T 21398-2008 |
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria 农林机械 电磁兼容性 试验方法和验收规则 |
China National Standards p |
English PDF |
GB/T 20969.5-2008 |
Special environmental condition - Machinery for plateau - Part 5: Guide rule of test for plateau natural environment - Construction machinery 特殊环境条件 高原机械 第5部分:高原自然环境试验导则 工程机械 |
China National Standards p |
English PDF |
GB/T 20969.4-2008 |
Special environmental condition - Machinery for plateau - Part 4: Guide rule of test for plateau natural environment - Internal combustion engines 特殊环境条件 高原机械 第4部分:高原自然环境试验导则 内燃动力机械 |
China National Standards p |
English PDF |
GB/T 16277-2008 |
Asphalt paver 沥青混凝土摊铺机 |
China National Standards p |
English PDF |
GB/T 2589-2008 |
General principles for calculation of the comprehensive energy consumption 综合能耗计算通则 |
China National Standards p |
English PDF |
Find out:43499Items | To Page of: First -Previous-Next -Last | [333] [334] [335] [336] [337] [338] [339] |