GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 1845.2-2006 |
plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards plastic |
English PDF |
GB/T 13577-2006 |
Mill for rubber and plastics 开放式炼胶机炼塑机 |
China National Standards plastic |
English PDF |
GB 20055-2006 |
Safety requirements of mill for rubber and plastics 开放式炼胶机炼塑机安全要求 |
China National Standards plastic |
English PDF |
GB 16487.12-2005 |
Environmental protection control standard for imported solid wastes as raw materials -- Waste and scrap of plastics 进口可用作原料的固体废物环境保护控制标准 废塑料 |
China National Standards plastic |
English PDF |
GB/T 8810-2005 |
Determination of water absorption of rigid cellular plastics 硬质泡沫塑料吸水率的测定 |
China National Standards plastic |
English PDF |
GB/T 19993-2005 |
Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 |
China National Standards plastic |
English PDF |
GB/T 8846-2005 |
Terminology of moulds for plastics 塑料成型模术语 |
China National Standards plastic |
English PDF |
GB/T 3402.1-2005 |
plastics Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations 塑料 氯乙烯均聚和共聚树脂 第1部分:命名体系和规范基础 |
China National Standards plastic |
English PDF |
GB/T 20028-2005 |
Rubber,vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use from an Arrhenius plot 硫化橡胶或热塑性橡胶 应用阿累尼乌斯图推算寿命和最高使用温度 |
China National Standards plastic |
English PDF |
GB/T 20027-2005 |
Rubber-or plastics-coated fabrics -- Determiation of bursting strength 橡胶或塑料涂覆织物 破裂强度的测定 |
China National Standards plastic |
English PDF |
GB/T 20026-2005 |
Rubber and plastics hose -- Determination of abrasion of lining 橡胶和塑料软管 内衬层耐磨性测定 |
China National Standards plastic |
English PDF |
GB/T 20025.2-2005 |
Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a |
China National Standards plastic |
English PDF |
GB/T 20024-2005 |
Rubber and plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 |
China National Standards plastic |
English PDF |
GB/T 20023-2005 |
Rubber and/or plastics hoses and hoses assemblies for airless paint spraying 无气喷涂用橡胶和/或塑料软管及软管组合件 |
China National Standards plastic |
English PDF |
GB/T 20022-2005 |
plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density 塑料 氯乙烯均聚和共聚树脂表观密度的测定 |
China National Standards plastic |
English PDF |
GB/T 12600-2005 |
Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials 金属覆盖层 塑料上镍+铬电镀层 |
China National Standards plastic |
English PDF |
GB/T 19812.2-2005 |
plastic equipment for water saving irrigation-Pressure compensating emitter and emitting pipe 塑料节水灌溉器材 压力补偿式滴头及滴灌管 |
China National Standards plastic |
English PDF |
GB/T 19812.1-2005 |
plastic equipment for water saving irrigation-drip tape with labyrinth on one side 塑料节水灌溉器材 单翼迷宫式滴灌带 |
China National Standards plastic |
English PDF |
GB/T 19796-2005 |
Agricultural irrigation equipment-plastics saddles for polyethylene pressure pipes 农业灌溉设备 聚乙烯承压管用塑料鞍座 |
China National Standards plastic |
English PDF |
GB/T 19789-2005 |
Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of plastic Film and Sheeting Using a Coulometric Sensor 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法 |
China National Standards plastic |
English PDF |
GB/T 9979-2005 |
Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures 纤维增强塑料高低温力学性能 试验准则 |
China National Standards plastic |
English PDF |
GB/T 8924-2005 |
Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method 纤维增强塑料燃烧性能试验方法 氧指数法 |
China National Standards plastic |
English PDF |
GB/T 8237-2005 |
Liquid unsaturated polyester resin for fiber reinforced plastics 纤维增强塑料用液体不饱和聚酯树脂 |
China National Standards plastic |
English PDF |
GB/T 7559-2005 |
Test method for bearing strength by bolted joints of fiber reinforced plastics laminates 纤维增强塑料层合板 螺栓连接挤压强度试验方法 |
China National Standards plastic |
English PDF |
GB/T 6011-2005 |
Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method 纤维增强塑料燃烧性能试验方法 炽热棒法 |
China National Standards plastic |
English PDF |
GB/T 5352-2005 |
Fiber-reinforced thermosetting plastic composites pipe-Determination for external loading properties by parallel-plate loading 纤维增强热固性塑料管平行板 外载性能试验方法 |
China National Standards plastic |
English PDF |
GB/T 5351-2005 |
Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure 纤维增强热固性塑料管短时水压 失效压力试验方法 |
China National Standards plastic |
English PDF |
GB/T 5350-2005 |
Fiber-reinforced thermosetting plastic composites pipe-Determination for longitudinal compressive properties 纤维增强热固性塑料管轴向压缩性能 试验方法 |
China National Standards plastic |
English PDF |
GB/T 5349-2005 |
Fiber-reinforced thermosetting plastic composites pipe-Determination of longitudinal tensile properties 纤维增强热固性塑料管轴向拉伸 性能试验方法 |
China National Standards plastic |
English PDF |
GB/T 4944-2005 |
Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates 玻璃纤维增强塑料层合板层间拉伸强度 试验方法 |
China National Standards plastic |
English PDF |
GB/T 4550-2005 |
Preparation of unidirection or ientated fiber reinforced plastic plates for test purposes 试验用单向纤维增强塑料平板的制备 |
China National Standards plastic |
English PDF |
GB/T 3857-2005 |
Test method for chemical resistance of glass fiber reinforced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 |
China National Standards plastic |
English PDF |
GB/T 3856-2005 |
Test method for compression properties of unidirectional fiber reinforced plastics 单向纤维增强塑料平板压缩性能试验方法 |
China National Standards plastic |
English PDF |
GB/T 3855-2005 |
Test method for resin content of carbon fiber reinforced plastics 碳纤维增强塑料树脂含量试验方法 |
China National Standards plastic |
English PDF |
GB/T 3854-2005 |
Test method for hardness of reinforced plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 |
China National Standards plastic |
English PDF |
GB/T 3140-2005 |
Fiber-reinforced plastics composites-Determination of mean specific heat capacity 纤维增强塑料平均比热容试验方法 |
China National Standards plastic |
English PDF |
GB/T 3139-2005 |
Fiber-reinforced plastics composites-Determination of thermal conductivity 纤维增强塑料导热系数试验方法 |
China National Standards plastic |
English PDF |
GB/T 2577-2005 |
Test method for resin content of glass fiber reinforced plastics 玻璃纤维增强塑料树脂含量试验方法 |
China National Standards plastic |
English PDF |
GB/T 2576-2005 |
Test method for insoluble matter content of resin rsed in fiber reinforced plastics 纤维增强塑料树脂不可溶分含量试验方法 |
China National Standards plastic |
English PDF |
GB/T 2572-2005 |
Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion 纤维增强塑料平均线膨胀系数试验方法 |
China National Standards plastic |
English PDF |
GB/T 1463-2005 |
Test methods for density and relative density of fiber reinforced plastics 纤维增强塑料密度和相对密度试验方法 |
China National Standards plastic |
English PDF |
GB/T 1462-2005 |
Test methods for water absorption of fiber reinforced plastics 纤维增强塑料吸水性试验方法 |
China National Standards plastic |
English PDF |
GB/T 1451-2005 |
Fiber-reinforced plastics composites---Determination of Charpy impact properties 纤维增强塑料简支梁式冲击韧性 试验方法 |
China National Standards plastic |
English PDF |
GB/T 1450.2-2005 |
Fibre-reinforced plastic composites-Determination of the punch-type shear strength 纤维增强塑料冲压式剪切强度试验方法 |
China National Standards plastic |
English PDF |
GB/T 1450.1-2005 |
Fibre-reinforced plastic composites-Determination of interlaminar shear strength 纤维增强塑料层间剪切强度试验方法 |
China National Standards plastic |
English PDF |
GB/T 1449-2005 |
Fibre-reinforced plastic composites-Determination of flexural properties 纤维增强塑料弯曲性能试验方法 |
China National Standards plastic |
English PDF |
GB/T 1448-2005 |
Fiber-reinforced plastics composites-Determination of compressive properties 纤维增强塑料压缩性能试验方法 |
China National Standards plastic |
English PDF |
GB/T 1447-2005 |
Fiber-reinforced plastics composites---Determination of tensile properties 纤维增强塑料拉伸性能试验方法 |
China National Standards plastic |
English PDF |
GB/T 1446-2005 |
Fiber-reinforced plastics composites-The generals for determination of properties 纤维增强塑料性能试验方法总则 |
China National Standards plastic |
English PDF |
GB/T 14206-2005 |
Corrugated sheets of glass fiber reinforced plastics 玻璃纤维增强聚酯波纹板 |
China National Standards plastic |
English PDF |
GB 19741-2005 |
The plastics laminated films and bags using for packaging of liquid food 液体食品包装用塑料复合膜、袋 |
China National Standards plastic |
English PDF |
GB/T 19811-2005 |
plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 在定义堆肥化中试条件下 塑料材料崩解程度的测定 |
China National Standards plastic |
English PDF |
GB/T 19809-2005 |
plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 |
China National Standards plastic |
English PDF |
GB/T 19808-2005 |
plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 |
China National Standards plastic |
English PDF |
GB/T 19807-2005 |
plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备 |
China National Standards plastic |
English PDF |
GB/T 19806-2005 |
plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies 塑料管材和管件 聚乙烯电熔组件的挤压剥离试验 |
China National Standards plastic |
English PDF |
GB/T 19712-2005 |
plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法 |
China National Standards plastic |
English PDF |
GB/T 19647-2005 |
Single wall corrugated plastics pipes for agricultural drainage 农田排水用塑料单壁波纹管 |
China National Standards plastic |
English PDF |
GB/T 19687-2005 |
Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods) 闭孔塑料长期热阻变化的测定 实验室加速测试方法 |
China National Standards plastic |
English PDF |
GB/T 19603-2004 |
Test method for drop-proof properties ofdrop-proof plastic films 塑料无滴薄膜无滴性能试验方法 |
China National Standards plastic |
English PDF |
GB 14232.1-2004 |
plastics collapsible containers for human blood and blood components--Part1:Conventional containers 人体血液及血液成分袋式塑料容器 第1部分:传统型血袋 |
China National Standards plastic |
English PDF |
GB/T 19467.2-2004 |
plastics--Acquisition and presentation of comparable single-point data--Part 2:Long-fibre-reinforced plastics 塑料 可比单点数据的获得和表示 第2部分:长纤维增强材料 |
China National Standards plastic |
English PDF |
GB/T 19467.1-2004 |
plastics--Acquisition and presentation of comparable single-point data--Part 1:Moulding materials 塑料 可比单点数据的获得和表示 第1部分:模塑材料 |
China National Standards plastic |
English PDF |
GB/T 19466.3-2004 |
plastics--Differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization 塑料 差示扫描量热法(DSC) 第3部分:熔融和结晶温度及热焓的测定 |
China National Standards plastic |
English PDF |
GB/T 19466.2-2004 |
plastics--Differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature 塑料 差示扫描量热法(DSC) 第2部分:玻璃化转变温度的测定 |
China National Standards plastic |
English PDF |
GB/T 19466.1-2004 |
plastics--Differential scanning calorimetry(DSC)--Part 1:General principles 塑料 差示扫描量热法(DSC) 第1部分:通则 |
China National Standards plastic |
English PDF |
GB/T 1634.3-2004 |
plastics--Determination of temperature of deflection under load--Part 3:High-strength thermosetting laminates 塑料 负荷变形温度的测定 第3部分:高强度热固性层压材料 |
China National Standards plastic |
English PDF |
GB/T 1634.2-2004 |
plastics--Determination of temperature of deflection under load--Part 2:Plastics,ebonite and long-fibre-reinforced composites 塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤维增强复合材料 |
China National Standards plastic |
English PDF |
GB/T 1634.1-2004 |
plastics--Determination of temperature of deflection under load--Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards plastic |
English PDF |
GB/T 8814-2004 |
Unplasticized polyvinyl chloride(PVC-U)profiles for the doors and windows 门、窗用未增塑聚氯乙烯(PVC-U)型材 |
China National Standards plastic |
English PDF |
GB/T 19471.2-2004 |
plastics piping systems--Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes--Test method for leaktightness under negative pressure 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 负压密封试验方法 |
China National Standards plastic |
English PDF |
GB/T 19471.1-2004 |
plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktighness under internal pressure and angular deflection 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法 |
China National Standards plastic |
English PDF |
GB/T 19470-2004 |
Geosythetics--plastic geonet 土工合成材料 塑料土工网 |
China National Standards plastic |
English PDF |
GB/T 12027-2004 |
plastics--Film and sheeting--Determination of dimensional change on heating 塑料 薄膜和薄片 加热尺寸变化率试验方法 |
China National Standards plastic |
English PDF |
GB 19434.8-2004 |
Safety code for theinspection of rigid plastics IBCs for dangerous goods--Performance tests 危险货物刚性塑料中型散装容器检验安全规范 性能检验 |
China National Standards plastic |
English PDF |
GB/T 12000-2003 |
Determination of the effects of exposure to damp heat,water spray and salt mist for plastics 塑料暴露于湿热、水喷雾和盐雾中影响的测定 |
China National Standards plastic |
English PDF |
GB/T 9350-2003 |
plastics--Homopolymer andcopolymer resins of vinyl chloride--Determination of pH of aqueous extract 塑料 氯乙烯均聚和共聚树脂水萃取液pH值的测定 |
China National Standards plastic |
English PDF |
GB/T 19280-2003 |
Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) 流体输送用热塑性塑料管材 耐快速裂纹扩展(RCP)的测定 小尺寸稳态试验(S4试验) |
China National Standards plastic |
English PDF |
GB/T 19278-2003 |
General terms and their definitions of thermoplastic pipes,fittings and valves 热塑性塑料管材、管件及阀门通用术语及其定义 |
China National Standards plastic |
English PDF |
GB/T 19276.2-2003 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium--Method by analysis of evolved carbon dioxide 水性培养液中材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 |
China National Standards plastic |
English PDF |
GB/T 19276.1-2003 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium--Method by measuring the oxygen demand in a closed respirometer 水性培养液中材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量的方法 |
China National Standards plastic |
English PDF |
GB/T 19275-2003 |
Evaluation of the potential biodegradability and disintegration of plastic materials by the action of the specific microorganisms 材料在特定微生物作用下潜在生物分解和崩解能力的评价 |
China National Standards plastic |
English PDF |
GB/T 19274-2003 |
Geosynthetics--plastic geocell 土工合成材料 塑料土工格室 |
China National Standards plastic |
English PDF |
GB/T 5009.98-2003 |
Method for analysis of hygienic standard of unsatur-ated polyester resin and glass fibre reinforced plastics used as food containers and packaging materials 食品容器及包装材料用不饱和聚酯树脂及其玻璃钢制品卫生标准的分析方法 |
China National Standards plastic |
English PDF |
GB/T 5566-2003 |
Rubber or plastics hoses--Test method for crush resistance 橡胶或塑料软管 耐压扁试验方法 |
China National Standards plastic |
English PDF |
GB/T 19243-2003 |
Rubber,vulcanized or thermoplastic--Methods of test for staining in contact with organic material 硫化橡胶或热塑性橡胶与有机物接触污染的试验方法 |
China National Standards plastic |
English PDF |
GB/T 7755-2003 |
Rubber,vulcanized of thermoplastic--Determination of permeability to gases 硫化橡胶或热塑性橡胶 透气性的测定 |
China National Standards plastic |
English PDF |
GB/T 12586-2003 |
Rubber or plastics-coated fabrics--Determination of resistance to damage by flexing 橡胶或塑料涂覆织物 耐屈挠破坏性的测定 |
China National Standards plastic |
English PDF |
GB/T 9647-2003 |
Thermoplastics pipes--Determination of ringstiffness 热塑性塑料管材环刚度的测定 |
China National Standards plastic |
English PDF |
GB/T 8804.3-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes 热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材 |
China National Standards plastic |
English PDF |
GB/T 8804.2-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) 热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材 |
China National Standards plastic |
English PDF |
GB/T 8804.1-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 1: General test method 热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则 |
China National Standards plastic |
English PDF |
GB/T 6111-2003 |
Thermoplastics pipes for the conveyance of fluids--Resistance to internal pressure--Test method 流体输送用热塑性塑料管材耐内压试验方法 |
China National Standards plastic |
English PDF |
GB/T 18991-2003 |
Thermoplastics pipes and fittings forhot and cold water systems 冷热水系统用热塑性塑料管材和管件 |
China National Standards plastic |
English PDF |
GB 12953-2003 |
Chlorinated polyethylene plastic sheets for waterproofing 氯化聚乙烯防水卷材 |
China National Standards plastic |
English PDF |
GB/T 6594.2-2003 |
plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties 塑料 聚苯乙烯(PS)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards plastic |
English PDF |
GB/T 2546.2-2003 |
plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties 塑料 聚丙烯(PP)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards plastic |
English PDF |
GB/T 18964.2-2003 |
plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards plastic |
English PDF |
GB/T 17037.4-2003 |
plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage 塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定 |
China National Standards plastic |
English PDF |
GB/T 17037.3-2003 |
plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates 塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片 |
China National Standards plastic |
English PDF |
Find out:1286Items | To Page of: First -Previous-Next -Last | [6] [7] [8] [9] [10] [11] [12] |