GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 14041.1-2007 |
Hydraulic fluid power - Filter element - Verification of fabrication integrity and determination of the first bubble point 液压滤芯 结构完整性验证和初始冒泡点的确定 |
China National Standards point |
English PDF |
GB/T 20725-2006 |
Electron probe microanalysis guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry 波谱法定性点分析电子探针显微分析导则 |
China National Standards point |
English PDF |
GB/T 20795-2006 |
Determination of smoking point for vegetable fats and oils 植物油脂烟点测定 |
China National Standards point |
English PDF |
GB/T 618-2006 |
Chemical reagent - General method for the determination of crystallizing point 化学试剂 结晶点测定通用方法 |
China National Standards point |
English PDF |
GB/T 616-2006 |
Chemical reagent - General method for the determination of boiling point 化学试剂 沸点测定通用方法 |
China National Standards point |
English PDF |
GB/T 12346-2006 |
Nomenclature and location of acupuncture points 腧穴名称与定位 |
China National Standards point |
English PDF |
GB/T 20343-2006 |
Agricultural tractors and machinery - Connection of implements via three-point linkage - Clearance zone around implement 农业拖拉机和机械 三点悬挂机具的联接装置 机具上的间隙范围 |
China National Standards point |
English PDF |
GB 12791-2006 |
point type ultraviolet flame detectors 点型紫外火焰探测器 |
China National Standards point |
English PDF |
GB/T 11349.2-2006 |
Vibration and shock - Experimental determination of mechanical mobility - Part 2: Measurements using single-point translation excitation with an attached vibration exciter 振动与冲击 机械导纳的试验确定 第2部分:用激振器作单点平动激励测量 |
China National Standards point |
English PDF |
GB/T 3871.4-2006 |
Agricultural tractors - Test procedures - Part 4: Rear three-point linkage lifting capacity 农业拖拉机 试验规程 第4部分:后置三点悬挂装置提升能力 |
China National Standards point |
English PDF |
GB/T 20088-2006 |
Machinery for agriculture - Trailed units of shallow tillage equipment - Main dimensions and attachment points 农业机械 浅耕机具的牵引装置 主要尺寸和连接点 |
China National Standards point |
English PDF |
GB/T 4510-2006 |
Test method for determination of breaking point of bitumen (Fraass method) 石油沥青脆点测定法#弗拉斯法 |
China National Standards point |
English PDF |
GB/T 3535-2006 |
Petroleum products - Determination of pour point 石油产品倾点测定法 |
China National Standards point |
English PDF |
GB/T 20014.11-2005 |
Good agricultural practice -- Part 11: Livestock transport control points and compliance criteria 良好农业规范 第11部分:畜禽公路运输控制点与符合性规范 |
China National Standards point |
English PDF |
GB 4716-2005 |
point type heat fire detectors 点型感温火灾探测器 |
China National Standards point |
English PDF |
GB 4715-2005 |
Smoke detectors-point detectors using scattered light,transmitted light or ionization 点型感烟火灾探测器 |
China National Standards point |
English PDF |
GB 19880-2005 |
Manual fire call points 手动火灾报警按钮 |
China National Standards point |
English PDF |
GB/T 19838-2005 |
Hazard Analysis and Critical Control point(HACCP) system and guidelines for Its application to fish fishery products 水产品危害分析与关键控制点(HACCP)体系及其应用指南 |
China National Standards point |
English PDF |
GB/T 9217.7-2005 |
Hardmetal burrs--Part 7:Arch pointed-nose burrs(style G) 硬质合金旋转锉 第7部分:弧形尖头旋转锉(G型) |
China National Standards point |
English PDF |
GB/T 9217.11-2005 |
Hardmetal burrs--Part 11:Conical pointed-nose burrs(style M) 硬质合金旋转锉 第11部分:锥形尖头旋转锉(M型) |
China National Standards point |
English PDF |
GB/T 19740-2005 |
Mechanical vibration and shock-Free,Mechanical impedance of the human hand-arm system at the driving point 机械振动与冲击 人体手臂系统驱动点的自由机械阻抗 |
China National Standards point |
English PDF |
GB/T 4380-2004 |
Assessment of departure from roundness--Two-and three-point methods 圆度误差的评定 两点、三点法 |
China National Standards point |
English PDF |
GB/T 19538-2004 |
Hazard analysis and critical control point(HACCP)system and guidelines for its application 危害分析与关键控制点(HACCP)体系及其应用指南 |
China National Standards point |
English PDF |
GB/T 19467.2-2004 |
Plastics--Acquisition and presentation of comparable single-point data--Part 2:Long-fibre-reinforced plastics 塑料 可比单点数据的获得和表示 第2部分:长纤维增强材料 |
China National Standards point |
English PDF |
GB/T 19467.1-2004 |
Plastics--Acquisition and presentation of comparable single-point data--Part 1:Moulding materials 塑料 可比单点数据的获得和表示 第1部分:模塑材料 |
China National Standards point |
English PDF |
GB/T 8177-2004 |
Internal micrometers with two-point contact 两点内径千分尺 |
China National Standards point |
English PDF |
GB/T 6314-2004 |
Internal micrometers with three-point contact 三爪内径千分尺 |
China National Standards point |
English PDF |
GB/T 6313-2004 |
pointed-contact micrometer with conical tips 尖头千分尺 |
China National Standards point |
English PDF |
GB/T 17127.4-2003 |
Agriculturalwheeled tractors and implements--Three-point hitch couplers--Part 4: Bar coupler 农业轮式拖拉机和机具 三点悬挂挂接器 第4部分: 杆式挂接器 |
China National Standards point |
English PDF |
GB/T 10916-2003 |
Agricultural wheeled tractors--Front-mounted equipment--Part 1: Power take-off and three-point linkage 农业轮式拖拉机 前置装置 第1部分:动力输出轴和三点悬挂装置 |
China National Standards point |
English PDF |
GB 15322.4-2003 |
Combustible gas detectors--Part 4: point type detectors for combustible man-made gas 可燃气体探测器 第4部分: 测量人工煤气的点型可燃气体探测器 |
China National Standards point |
English PDF |
GB 15322.1-2003 |
Combustible gas detectors--Part 1:point type detectors for 0~100%LEL combustible gas 可燃气体探测器 第1部分:测量范围为0~100%LEL的点型可燃气体探测器 |
China National Standards point |
English PDF |
GB/T 1663-2001 |
Plasticizers--Determination of crytallizing point 增塑剂结晶点的测定 |
China National Standards point |
English PDF |
GB/T 1602-2001 |
Testing method of melting point for pesticides 农药熔点测定方法 |
China National Standards point |
English PDF |
GB/T 8632-2001 |
Textiles--Woven fabrics--Determination of dimensional change on commercial laundering near the boiling point 纺织品 机织物 近沸点 商业洗烫后尺寸变化的测定 |
China National Standards point |
English PDF |
GB/T 8591-2000 |
Earth-moving machinery--Seat index point 土方机械 司机座椅标定点 |
China National Standards point |
English PDF |
GB/T 17966-2000 |
Binary floating-point arithmetic for microprocessor systems 微处理器系统的二进制浮点运算 |
China National Standards point |
English PDF |
GB/T 17789-1999 |
Procedures for simultaneous transmission of data and digitally encoded voice signals over the PSTN or over 2-wire leased point-to-point telephone type circuits 在PSTN或二线点对点租用电话型电路上同时传送数据和数字化编码语音信号的规程 |
China National Standards point |
English PDF |
GB/T 17535-1998 |
Information technology--Telecommunications and information exchange between systems--Interface connector and contact assignments for ISDN basic access interface located at reference points S and T 信息技术 系统间远程通信和信息交换 在S和T参考点上定位的ISDN基本接入接口用的接口连接器和接触件分配 |
China National Standards point |
English PDF |
GB/T 17127.3-1998 |
Agricultural wheeled tractors and implements--Three-point hitch couplers--Part 3:Link coupler 农业轮式拖拉机和机具 三点悬挂挂接器 第3部分:连杆式挂接器 |
China National Standards point |
English PDF |
GB/T 17127.1-1998 |
Agricultural wheeled tractors and implements--Three-point hitch couplers--Part 1:U-frame coupler 农业轮式拖拉机和机具 三点悬挂挂接器 第1部分:U型框架式挂接器 |
China National Standards point |
English PDF |
GB/T 17127.2-1997 |
Agricultural wheeled tractors and implements--Three-point hitch coupler--Part 2:A-frame coupler 农业轮式拖拉机和机具 三点悬挂挂接器 第2部分:A型框架式挂接器 |
China National Standards point |
English PDF |
GB/T 17125-1997 |
Agricultural tractors andimplements--Four-point rigid hitch--Specifications 农业拖拉机和机具 四点刚性挂接装置 技术规范 |
China National Standards point |
English PDF |
GB/T 17123-1997 |
Lawn and garden ride-on (riding) tractors--One-point tubular sleeve hitch 草坪和园艺乘座式拖拉机 单点套管式悬挂装置 |
China National Standards point |
English PDF |
GB/T 16816-1997 |
A 48/56/64 kbit/s data circuit terminating equipment standardized for use on digital point-to-point leased circuits 点对点数字租用电路上使用的48/56/64kbit/s数据电路终接设备技术要求 |
China National Standards point |
English PDF |
GB/T 2294-1997 |
Solid products of coal carbonization--Determination of softening point 焦化固体类产品 软化点测定方法 |
China National Standards point |
English PDF |
GB/T 16650-1996 |
General specification for microwave communication systems with TDM/FDMA point-to-multipoint TDM/FDMA点对多点微波通信系统通用规范 |
China National Standards point |
English PDF |
GB/T 16461-1996 |
Tool-life testing with single-point turning tools 单刃车削刀具寿命试验 |
China National Standards point |
English PDF |
GB/T 16440-1996 |
Vibration and shock--Mechanical driving point impedance of the human body 振动与冲击 人体的机械驱动点阻抗 |
China National Standards point |
English PDF |
GB/T 16404-1996 |
Acoustics--Determination of sound power levels of noise sources using sound intensity--Part 1:Measurement at discrete points 声学 声强法测定噪声源的声功率级 第1部分:离散点上的测量 |
China National Standards point |
English PDF |
GB/T 294-1994 |
Rolling bearings--Three pointand four point contact ball bearings--Boundary dimensions 滚动轴承 三点和四点接触球轴承 外形尺寸 |
China National Standards point |
English PDF |
GB/T 15332-1994 |
Determination of the softening point ofhot-melt adhesives--Ball and ring method 热熔胶粘剂软化点的测定 环球法 |
China National Standards point |
English PDF |
GB/T 7533-1993 |
Determination for crystallizing point of organic chemical products for industrial use 有机化工产品结晶点的测定方法 |
China National Standards point |
English PDF |
GB/T 14235.1-1993 |
Testing method for melting point of pattern materials in investment casting 熔模铸造模料 熔点测定方法(冷却曲线法) |
China National Standards point |
English PDF |
GB/T 13806.2-1992 |
Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point 精密机械用紧固件 十字槽自攻螺钉 刮削端 |
China National Standards point |
English PDF |
GB/T 12577-1990 |
Refrigerator oils--Determination of floc point 冷冻机油絮凝点测定法 |
China National Standards point |
English PDF |
GB/T 12007.6-1989 |
Epoxide resins--Determination of softening point--Ring and ball method 环氧树脂软化点测定方法 环球法 |
China National Standards point |
English PDF |
GB/T 267-1988 |
Petroleum products--Determinationof flash and fire points--Open cup 石油产品闪点与燃点测定法 (开口杯法) |
China National Standards point |
English PDF |
GB/T 9541-1988 |
2400 bits per second duplex modem using the echo cancellation technique standardized for use on the general switched telephone network and on point-to-point 2 wire leased telephone-type-circuits 在普通电话交换网和点对点二线租用电话型电路上使用标准化的回波抵消技术的2400比特/ 秒双工调制解调器 |
China National Standards point |
English PDF |
GB/T 86-1988 |
Square set screws with short dog point and coneend 方头短圆柱锥端紧定螺钉 |
China National Standards point |
English PDF |
GB/T 85-1988 |
Square set screws with long dog point 方头长圆柱端紧定螺钉 |
China National Standards point |
English PDF |
GB/T 84-1988 |
Square set screws with cup point 方头凹端紧定螺钉 |
China National Standards point |
English PDF |
GB/T 83-1988 |
Square set screws with long dog point and rounded end 方头长圆柱球面端紧定螺钉 |
China National Standards point |
English PDF |
GB/T 829-1988 |
Slotted set screws with dog point 开槽圆柱端定位螺钉 |
China National Standards point |
English PDF |
GB/T 828-1988 |
Slotted pan head set screws with dog point 开槽盘头定位螺钉 |
China National Standards point |
English PDF |
GB/T 72-1988 |
Slotted set screws with cone point 开槽锥端定位螺钉 |
China National Standards point |
English PDF |
GB/T 7621-1987 |
1200 bits per second duplex modem standardized for use in the general switched telephone network and on point-to-point 2-wire leased telephonecircuits 在电话自动交换网和点对点二线租用电话型电路上使用的标准化的1200比特/秒双工调制解调器 |
China National Standards point |
English PDF |
GB/T 6843-1986 |
Method for determining the coating melting point of photographic materials 感光材料涂层熔点测定方法 |
China National Standards point |
English PDF |
GB/T 5536-1985 |
Inspection of vegetable oils--Methods for determination of melting point 植物油脂检验 熔点测定法 |
China National Standards point |
English PDF |
GB/T 75-1985 |
Slotted set screws with long dog point 开槽长圆柱端紧定螺钉 |
China National Standards point |
English PDF |
GB/T 74-1985 |
Slotted set screws with cup point 开槽凹端紧定螺钉 |
China National Standards point |
English PDF |
GB/T 73-1985 |
Slotted set screws with flat point 开槽平端紧定螺钉 |
China National Standards point |
English PDF |
GB/T 71-1985 |
Slotted set screws with cone point 开槽锥端紧定螺钉 |
China National Standards point |
English PDF |
GB/T 5080.4-1985 |
Equipment reliability testing--Procedure for point estimates and confidence intervals from reliability determination tests(Exponential distribution) 设备可靠性试验 可靠性测定试验的点估计和区间估计方法 (指数分布) |
China National Standards point |
English PDF |
GB/T 4929-1985 |
Lubricating grease--Determination of dropping point 润滑脂滴点测定法 |
China National Standards point |
English PDF |
GB/T 382-1983 |
Kerosene--Determination of smoke point 煤油烟点测定法 |
China National Standards point |
English PDF |
GB/T 510-1983 |
Petroleum products--Determination of solidificationpoint 石油产品凝点测定法 |
China National Standards point |
English PDF |
GB/T 3145-1982 |
Benzene--Determination of crystallizing point 苯结晶点测定法 |
China National Standards point |
English PDF |
Find out:278Items | To Page of: First -Previous-Next -Last | 1 2 3 |