GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19242-2003 |
Rubber,vulcanized--Determination of creep in compression or shear 硫化橡胶 在压缩或剪切状态下蠕变的测定 |
China National Standards si |
English PDF |
GB/T 19248-2003 |
Test method for measuring the resistance of package leads 封装引线电阻测试方法 |
China National Standards si |
English PDF |
GB/T 19247.1-2003 |
Printed board assemblies--Part 1: Generic specification--Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies 印制板组装 第1部分:通用规范 采用表面安装和相关组装技术的电子和电气焊接组装的要求 |
China National Standards si |
English PDF |
GB/T 19245-2003 |
Specification for information interchange of electronic business card 电子名片信息交换规范 |
China National Standards si |
English PDF |
GB/T 19234-2003 |
Dimensional codes for passenger cars 乘用车尺寸代码 |
China National Standards si |
English PDF |
GB/T 19230.6-2003 |
Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method) 评价汽油清净剂使用效果的试验方法 第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(M111法) |
China National Standards si |
English PDF |
GB/T 19230.5-2003 |
Test method for evaluating gasoline detergent in use--Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(Ford 2.3L method) 评价汽油清净剂使用效果的试验方法 第5部分: 汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(Ford 2.3L方法) |
China National Standards si |
English PDF |
GB/T 19230.4-2003 |
Test method for evaluating gasoline detergent in use--Part 4: Test method for influence of induction system deposit(ISD)tendencies of gasoline detergent 评价汽油清净剂使用效果的试验方法 第4部分: 汽油清净剂对汽油机进气系统沉积物(ISD)生成倾向影响的试验方法 |
China National Standards si |
English PDF |
GB/T 19230.2-2003 |
Test method for evaluating gasoline detergent in use--Part 2: Test method for demulsibility of gasoline detergent 评价汽油清净剂使用效果的试验方法 第2部分: 汽油清净剂破乳性能试验方法 |
China National Standards si |
English PDF |
GB/T 19231-2003 |
Basic terminology of land 土地基本术语 |
China National Standards si |
English PDF |
GB/T 19203-2003 |
Determination of calcium,magnesium andsulphur content for compound fertilizer 复混肥料中钙、镁、硫含量的测定 |
China National Standards si |
English PDF |
GB/T 8146-2003 |
Test methods for rosin 松香试验方法 |
China National Standards si |
English PDF |
GB/T 19200-2003 |
Diagnostic techniques for swine vesicular disease 猪水泡病诊断技术 |
China National Standards si |
English PDF |
GB/T 12964-2003 |
Monocrystalline silicon polished wafers 硅单晶抛光片 |
China National Standards si |
English PDF |
GB 18458.2-2003 |
Special infusion sets--Part 2: Burette-type infusion sets for single use 专用输液器 第2部分: 一次性使用滴定管式输液器 |
China National Standards si |
English PDF |
GB 8058-2003 |
Standard permissible limits and testing method for release of lead or cadmium from ceramic cookware 陶瓷烹调器铅、镉溶出量允许极限和检测方法 |
China National Standards si |
English PDF |
GB 4491-2003 |
Rubber transfusion tubes 橡胶输血胶管 |
China National Standards si |
English PDF |
GB 19196-2003 |
Kart classification and homologation 卡丁车分类与注册 |
China National Standards si |
English PDF |
GB/T 1563-2003 |
Taper keys--Cross section dimensions of keyways 楔键 键槽的剖面尺寸 |
China National Standards si |
English PDF |
GB/T 10043-2003 |
Clutch--Classification 离合器分类 |
China National Standards si |
English PDF |
GB/T 19183.4-2003 |
Mechanical structuresfor electronic equipment--Outdoor enclosures--Part 2-2: Dimensions for cases 电子设备机械结构 户外机壳 第2-2部分: 箱体尺寸 |
China National Standards si |
English PDF |
GB/T 19183.3-2003 |
Mechanical structuresfor electronic equipment--Outdoor enclosures--Part 2-1:Dimensions for cabinets 电子设备机械结构 户外机壳 第2-1部分:机柜尺寸 |
China National Standards si |
English PDF |
GB/T 19183.2-2003 |
Mechanical structures for electronic equipment--Outdoor enclosures--Part 2: Coordination dimensions for cases and cabinets 电子设备机械结构 户外机壳 第2部分: 箱体和机柜的协调尺寸 |
China National Standards si |
English PDF |
GB/T 19183.1-2003 |
Mechanical structures for electronic equipment--Outdoor enclosures--Part 1: Design guidelines 电子设备机械结构 户外机壳 第1部分:设计导则 |
China National Standards si |
English PDF |
GB 4706.65-2003 |
Safety of household and similar electrical appliances--Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators 家用和类似用途电器的安全 步行控制的电动草坪松土机和松砂机的专用要求 |
China National Standards si |
English PDF |
GB/T 5094.2-2003 |
Industrial systems,installations and equipment and industrial products--Structuring principles and reference designations--Part 2: Classification of objects and codes for classes 工业系统、装置与设备以及工业产品 结构原则与参照代号 第2部分: 项目的分类与分类码 |
China National Standards si |
English PDF |
GB/T 5147-2003 |
The classification,nomenclature and code of fishing gear 渔具分类、命名及代号 |
China National Standards si |
English PDF |
GB/T 19178-2003 |
Testing rules for parent eggs of silkworm (Bombyx mori) 桑蚕原种检验规程 |
China National Standards si |
English PDF |
GB 19179-2003 |
Parent eggs of silkworm(Bombyx mori) 桑蚕原种 |
China National Standards si |
English PDF |
GB 19166-2003 |
Chinese simmental 中国西门塔尔牛 |
China National Standards si |
English PDF |
GB 16915.4-2003 |
Switches for household and similar fixed-electrical installations--Part 2:Particular requirements--Section 3: Time-delay switches(TDS) 家用和类似用途固定式电气装置的开关 第2部分: 特殊要求 第3节: 延时开关 |
China National Standards si |
English PDF |
GB/T 7631.2-2003 |
Lubricants,industrial oils and related products(class L)--Classification--Part 2: Family H(Hydraulic systems) 润滑剂、工业用油和相关产品(L类)的分类 第2部分:H组(液压系统) |
China National Standards si |
English PDF |
GB/T 24015-2003 |
Environmental management--Environmental assessment of sites and organizations(EASO) 环境管理 现场和组织的环境评价(EASO) |
China National Standards si |
English PDF |
GB/T 9146-2003 |
General purpose metric screw threads--Limits of sizes for the screw threads of coarse quality and preferable plan 普通螺纹 粗糙精度、优选系列的极限尺寸 |
China National Standards si |
English PDF |
GB/T 9145-2003 |
General purpose metric screw threads--Limits of sizes for the screw threads of medium quality and preferable plan 普通螺纹 中等精度、优选系列的极限尺寸 |
China National Standards si |
English PDF |
GB/T 196-2003 |
General purpose metric screw threads--Basic dimensions 普通螺纹 基本尺寸 |
China National Standards si |
English PDF |
GB/T 192-2003 |
General purpose metric screw threads--Basic profile 普通螺纹 基本牙型 |
China National Standards si |
English PDF |
GB/T 14683-2003 |
silicone sealant for building 硅酮建筑密封胶 |
China National Standards si |
English PDF |
GB/T 8188-2003 |
Internal combustion engine--Emissions terminology and nomenclature 内燃机 排放术语和定义 |
China National Standards si |
English PDF |
GB/T 6072.5-2003 |
Reciprocating internal combustion engines--Performance--Part 5: Torsional vibrations 往复式内燃机 性能 第5部分: 扭转振动 |
China National Standards si |
English PDF |
GB/T 19113-2003 |
Classification of mulberry silkworm fresh cocoons (Method of dry weight of the cocoons layer) 桑蚕鲜茧分级(干壳量法) |
China National Standards si |
English PDF |
GB/T 6160-2003 |
Micrographics--First generation silver-gelatin microforms of source documents--Density specifications and method of measurement 缩微摄影技术 源文件第一代银--明胶型缩微品密度规范与测量方法 |
China National Standards si |
English PDF |
GB 15629.11-2003 |
Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) andPhysical Layer(PHY) Specifications 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范 |
China National Standards si |
English PDF |
GB 15629.1102-2003 |
Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer(PHY) Specifications: Higher-Speed Physi 信息技术 系统间远程通信和信息交换局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:2.4 GHz频段较高速物理层扩展规范 |
China National Standards si |
English PDF |
GB/T 4458.5-2003 |
Mechanical drawings--Indication of tolerances for size and of fits 机械制图 尺寸公差与配合注法 |
China National Standards si |
English PDF |
GB/T 4458.4-2003 |
Mechanical drawings--Dimensioning 机械制图 尺寸注法 |
China National Standards si |
English PDF |
GB 19085-2003 |
Requirement to protect contagious from business and service industry environment 商业、服务业经营场所传染性疾病预防措施 |
China National Standards si |
English PDF |
GB 50032-2003 |
Code for earthquake - resistant design of outdoor water supply,sewerage,gas and heating engineering 室外给水排水和燃气热力工程抗震设计规范 |
China National Standards si |
English PDF |
GB 50017-2003 |
Code for design of steel structures 钢结构设计规范 |
China National Standards si |
English PDF |
GB/T 12586-2003 |
Rubber or plastics-coated fabrics--Determination of resistance to damage by flexing 橡胶或塑料涂覆织物 耐屈挠破坏性的测定 |
China National Standards si |
English PDF |
GB 17269-2003 |
Safety regulation for the prevention and protection of dust explosion in manufacturing powder of aluminum and/or magnesium 铝镁粉加工粉尘防爆安全规程 |
China National Standards si |
English PDF |
GB/T 18778.2-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Surface having stratified functional properties--Part 2: Height characterization using the linear material ratio curve 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第2部分: 用线性化的支承率曲线表征高度特性 |
China National Standards si |
English PDF |
GB/T 13319-2003 |
Geometrical Product Specifications(GPS)--Geometrical tolerancing--Positional tolerancing 产品几何量技术规范(GPS) 几何公差 位置度公差注法 |
China National Standards si |
English PDF |
GB 50015-2003 |
Code for design of building water supply and drainage 建筑给水排水设计规范(2009年版) |
China National Standards si |
English PDF |
GB/T 8243.3-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 |
China National Standards si |
English PDF |
GB/T 8190.8-2003 |
Reciprocating internal combustion engines--Exhaust emission measurement--Part 8: Engine group determination 往复式内燃机 排放测量 第8部分: 发动机系组的确定 |
China National Standards si |
English PDF |
GB/T 8190.7-2003 |
Reciprocating internal combustion engines--Exhaust emission measurement--Part 7: Engine family determination 往复式内燃机 排放测量 第7部分: 发动机系族的确定 |
China National Standards si |
English PDF |
GB/T 8190.3-2003 |
Reciprocating internal combustion engines--Exhaust emission measurement--Part 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions 往复式内燃机 排放测量 第3部分: 稳态工况排气烟度的定义和测量方法 |
China National Standards si |
English PDF |
GB/T 19078-2003 |
Magnesium alloy ingots for castings 铸造镁合金锭 |
China National Standards si |
English PDF |
GB/T 19076-2003 |
sintered metal materials--Specifications 烧结金属材料规范 |
China National Standards si |
English PDF |
GB 50338-2003 |
Code of design for fixed fire monitor extinguishing systems 固定消防炮灭火系统设计规范 |
China National Standards si |
English PDF |
GB 19060-2003 |
Emission regulationof air pollutants for destruction of chemical weapons abandoned in China by Japan 销毁日本遗弃在华化学武器大气污染物排放标准(试行) |
China National Standards si |
English PDF |
GB/T 17680.9-2003 |
Criteria for emergency planning and preparedness for nuclear power plants--Maintenance of on-site emergency response capacity 核电厂应急计划与准备准则 场内应急响应能力的保持 |
China National Standards si |
English PDF |
GB/T 17680.8-2003 |
Criteria for emergency planning and preparedness for nuclear power plants--On-site emergency planning and implementing procedures 核电厂应急计划与准备准则 场内应急计划与执行程序 |
China National Standards si |
English PDF |
GB/T 17680.7-2003 |
Criteria for emergency planning and preparedness for nuclear power plants--Function and physical characteristics of on-site emergency facilities 核电厂应急计划与准备准则 场内应急设施功能与特性 |
China National Standards si |
English PDF |
GB/T 17680.6-2003 |
Criteria for emergency planning and preparedness for nuclear power plants--On-site emergency response functions and organizations 核电厂应急计划与准备准则 场内应急响应职能与组织机构 |
China National Standards si |
English PDF |
GB/T 17680.10-2003 |
Criteria for emergency planning and preparedness for nuclear power plants--Criteria for emergency radiological field monitoring,sampling and analysis conducted by nuclear power plant operating organizations 核电厂应急计划与准备准则 核电厂营运单位应急野外辐射监测、取样与分析准则 |
China National Standards si |
English PDF |
GB 7231-2003 |
Basic identification colors and code indications and safety sign for industrial pipelines 工业管道的基本识别色、识别符号和安全标识 |
China National Standards si |
English PDF |
GB/T 8196-2003 |
Safety ofmachinery--Guards--General requirements for the design and construction of fixed and movable guards 机械安全 防护装置 固定式和活动式防护装置设计与制造一般要求 |
China National Standards si |
English PDF |
GB/T 10574.9-2003 |
Methods for chemical analysis of tin-lead solders--Determination of aluminum content 锡铅焊料化学分析方法 铝量的测定 |
China National Standards si |
English PDF |
GB/T 10574.8-2003 |
Methods for chemical analysis of tin-lead solders--Determination of zinc content 锡铅焊料化学分析方法 锌量的测定 |
China National Standards si |
English PDF |
GB/T 10574.7-2003 |
Methods for chemical analysis of tin-lead solders--Determination of silver content 锡铅焊料化学分析方法 银量的测定 |
China National Standards si |
English PDF |
GB/T 10574.6-2003 |
Methods for chemical analysis of tin-lead solders--Determination of copper content 锡铅焊料化学分析方法 铜量的测定 |
China National Standards si |
English PDF |
GB/T 10574.5-2003 |
Methods for chemical analysis of tin-lead solders--Determination of arsenic content 锡铅焊料化学分析方法 砷量的测定 |
China National Standards si |
English PDF |
GB/T 10574.4-2003 |
Methods for chemical analysis of tin-lead solders--Determination of iron content 锡铅焊料化学分析方法 铁量的测定 |
China National Standards si |
English PDF |
GB/T 10574.3-2003 |
Methods for chemical analysis of tin-lead solders--Determination of bismuth content 锡铅焊料化学分析方法 铋量的测定 |
China National Standards si |
English PDF |
GB/T 10574.2-2003 |
Methods for chemical analysis of tin-lead solders--Determination of antimony content 锡铅焊料化学分析方法 锑量的测定 |
China National Standards si |
English PDF |
GB/T 10574.13-2003 |
Methods for chemical analysis of tin-lead solders--Determination of copper,iron,cadmium,silver,gold,arsenic,zinc,aluminium,bismuth,phosphorous content 锡铅焊料化学分析方法 铜、铁、镉、银、金、砷、锌、铝、铋、磷量的测定 |
China National Standards si |
English PDF |
GB/T 10574.12-2003 |
Methods for chemical analysis of tin-lead solders--Determination of sulphur content 锡铅焊料化学分析方法 硫量的测定 |
China National Standards si |
English PDF |
GB/T 10574.1-2003 |
Methods for chemical analysis of tin-lead solders--Determination of tin content 锡铅焊料化学分析方法 锡量的测定 |
China National Standards si |
English PDF |
GB/T 10574.11-2003 |
Methods for chemical analysis of tin-lead solders--Determination of phosphorus content 锡铅焊料化学分析方法 磷量的测定 |
China National Standards si |
English PDF |
GB/T 10574.10-2003 |
Methods for chemical analysis of tin-lead solders--Determination of cadmium content 锡铅焊料化学分析方法 镉量的测定 |
China National Standards si |
English PDF |
GB/T 18997.2-2003 |
Polyethylene/Aluminum/Polyethylene composite pressure pipe--Part 2:PE/AL/PE pipe butt-welded by aluminum pipe 铝塑复合压力管 第2部分:铝管对接焊式铝塑管 |
China National Standards si |
English PDF |
GB/T 18997.1-2003 |
Polyethylene/Aluminum/Polyethylene composite pressure pipe--Part 1:PE/AL/PE pipe overlap-welded by aluminum pipe 铝塑复合压力管 第1部分:铝管搭接焊式铝塑管 |
China National Standards si |
English PDF |
GB/T 18996-2003 |
Determination of silver in silver jewellery alloys--Volumertic(potentiometric) method using sodium chloride or potassium chloride 银合金首饰中含银量的测定 氯化钠或氯化钾容量法(电位滴定法) |
China National Standards si |
English PDF |
GB/T 18780.2-2003 |
Geometrical Product Specifications(GPS)--Geometrical features--Part 2: Extracted median line of a cylinder and a cone,extracted median surface,local size of an extracted feature 产品几何量技术规范(GPS) 几何要素 第2部分: 圆柱面和圆锥面的提取中心线、平行平面的提取中心面、提取要素的局部尺寸 |
China National Standards si |
English PDF |
GB/T 1803-2003 |
Limits and fits--Tolerance zones for holes and shafts size up to 18mm 极限与配合 尺寸至18 mm孔、轴公差带 |
China National Standards si |
English PDF |
GB/T 8804.3-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes 热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材 |
China National Standards si |
English PDF |
GB/T 8804.2-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) 热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材 |
China National Standards si |
English PDF |
GB/T 8804.1-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 1: General test method 热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则 |
China National Standards si |
English PDF |
GB/T 6111-2003 |
Thermoplastics pipes for the conveyance of fluids--Resistance to internal pressure--Test method 流体输送用热塑性塑料管材耐内压试验方法 |
China National Standards si |
English PDF |
GB/T 18995-2003 |
Cinematography--Manufacturer-printed,latent image identification on 16mm,35mm and 65mm motion-picture film--Specifications and dimensions 电影摄影术 在16mm、35mm和65mm电影胶片上由制造厂印制的潜影标识 规范和尺寸 |
China National Standards si |
English PDF |
GB/T 14831-2003 |
Test method of resistance to steam ageing forrubber latex products 胶乳制品蒸汽老化试验方法 |
China National Standards si |
English PDF |
GB/T 18973-2003 |
Classification and evaluation of tourism toilets 旅游厕所质量等级的划分与评定 |
China National Standards si |
English PDF |
GB/T 18972-2003 |
Classification,investigation and evaluation of tourism resources 旅游资源分类、调查与评价 |
China National Standards si |
English PDF |
GB/T 18969-2003 |
Determination of residues of organaphosphorus in feeds--Gas chromatagraphic method 饲料中有机磷农药残留量的测定 气相色谱法 |
China National Standards si |
English PDF |
GB/Z 18039.5-2003 |
Electromagnetic compatibility--Environment--Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems 电磁兼容 环境 公用供电系统低频传导骚扰及信号传输的电磁环境 |
China National Standards si |
English PDF |
GB/Z 17625.6-2003 |
Electromagnetic compatibility--Limits--Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A 电磁兼容 限值 对额定电流大于16A的设备在低压供电系统中产生的谐波电流的限制 |
China National Standards si |
English PDF |
GB/T 18977-2003 |
Ergonomics of the thermal environment--Assessment of the influence of the thermal environment usingsubjective judgement scales 热环境人类工效学 使用主观判定量表评价热环境的影响 |
China National Standards si |
English PDF |
GB/T 18976-2003 |
Human-centred design processes for interactive systems 以人为中心的交互系统设计过程 |
China National Standards si |
English PDF |
Find out:17019Items | To Page of: First -Previous-Next -Last | [145] [146] [147] [148] [149] [150] [151] |