Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 32372-2015 |
Evaluation of the effectiveness of surface treatment techniques for aluminium use in adhesives by wet-peel test by floating-roller 浮辊法湿剥离强度评价粘接用铝材表面处理有效性的试验方法 |
China National Standards si |
 English PDF |
| GB/T 32371.4-2015 |
Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application—Part 4: Determination of volatile diisocyanates 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第4部分：挥发性二异氰酸酯的测定 |
China National Standards si |
English PDF |
| GB/T 32371.3-2015 |
Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 3: Determination of volatile aldehydes 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第3部分：挥发性醛类化合物的测定 |
China National Standards si |
English PDF |
| GB/T 32371.2-2015 |
Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 2: Determination of volatile organic compound 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第2部分：挥发性有机化合物的测定 |
China National Standards si |
English PDF |
| GB/T 32371.1-2015 |
Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 1: General procedure 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第1部分：通则 |
China National Standards si |
English PDF |
| GB/T 32370-2015 |
Determination of the length and width for adhesive tapes 胶粘带长度和宽度的测定 |
China National Standards si |
English PDF |
| GB/T 32368-2015 |
Measurement of resistance to elevated temperature and humidity for adhesive tapes 胶粘带耐高温高湿老化的试验方法 |
China National Standards si |
English PDF |
| GB/T 32356-2015 |
Guide of design for recycling of electrical and electronic products 电子电气产品可再生利用设计导则 |
China National Standards si |
English PDF |
| GB/T 32355.2-2015 |
Assessment values of recyclability rate for electrical and electronic products—Part 2: Washing machines, television sets and computers 电工电子产品可再生利用率评价值 第2部分：洗衣机、电视机和微型计算机 |
China National Standards si |
English PDF |
| GB/T 32350.1-2015 |
Railway applications—Insulation coordination—Part 1: Basic requirements—Clearances and creepage distances for all electrical and electronic equipment 轨道交通 绝缘配合 第1部分：基本要求 电工电子设备的电气间隙和爬电距离 |
China National Standards si |
English PDF |
| GB/T 32348.2-2015 |
Electrical resistance trace heating systems for industrial and commercial applications—Part 2: Application guide for system design, installation and maintenance 工业和商业用电阻式伴热系统 第2部分：系统设计安装和维护应用指南 |
China National Standards si |
English PDF |
| GB/T 32348.1-2015 |
Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements 工业和商业用电阻式伴热系统 第1部分：通用和试验要求 |
China National Standards si |
English PDF |
| GB/T 32347.3-2015 |
Railway applications—Environmental conditions for equipment —Part 3: Equipment for signaling and telecommunications 轨道交通 设备环境条件 第3部分：信号和通信设备 |
China National Standards si |
English PDF |
| GB/T 32336-2015 |
Pneumatic fluid power—Basic,mounting and accessories dimensions of cylinders with detachable mountings, bores from 32mm to 320mm 气动 带可拆卸安装件的缸径32mm至320mm的气缸基本尺寸、安装尺寸和附件尺寸 |
China National Standards si |
English PDF |
| GB/T 32335-2015 |
Mechanical vibration and shock—Parameters to be specified for the acquisition of vibration data 机械振动与冲击 振动数据采集的参数规定 |
China National Standards si |
English PDF |
| GB/T 32330-2015 |
Light conveyor belts—Determination of the maximum tensile strength 轻型输送带 最大拉伸强度的测定 |
China National Standards si |
English PDF |
| GB/T 32329-2015 |
Test method for oxidation resistance of oxynitride materials—Non-isothermal oxidation 氮氧化物材料抗氧化性试验方法 变温氧化法 |
China National Standards si |
English PDF |
| GB/T 32308-2015 |
Requirements for post-mission disposal of GEO satellites GEO卫星任务后处置要求 |
China National Standards si |
English PDF |
| GB/T 32297-2015 |
simulation requirements for space control system 航天控制系统仿真要求 |
China National Standards si |
English PDF |
| GB/T 32295-2015 |
Design requirements for residual propellant venting of launch vehicle 运载火箭剩余推进剂排放设计要求 |
China National Standards si |
English PDF |
| GB/T 31463.2-2015 |
Devices for the connection of luminaires for household and similar purposes—Part 2: Standard sheets for DCL 家用和类似用途灯具的连接装置 第2部分：DCL用标准活页 |
China National Standards si |
English PDF |
| GB/T 23718.4-2015 |
Condition monitoring and diagnostics of machines—Requirements for qualification and assessment of personnel—Part 4: Field lubricant analysis 机器状态监测与诊断 人员资格与人员评估的要求 第4部分：现场润滑剂分析 |
China National Standards si |
English PDF |
| GB/T 20463-2015 |
Rubber- or plastics-coated fabrics for water-resistant clothing—Specification 防水服用橡胶或塑料涂覆织物 规范 |
China National Standards si |
English PDF |
| GB/T 18290.4-2015 |
Solderless connections— Part 4: Solderless non-accessible insulation displacement connections— General requirements, test methods and practical guidance 无焊连接 第4部分：不可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 |
China National Standards si |
English PDF |
| GB/T 16920-2015 |
Glass—Determination of coefficient of mean linear thermal expansion 玻璃 平均线热膨胀系数的测定 |
China National Standards si |
English PDF |
| GB/T 13550-2015 |
Molecular sieve 5A and its determination 5A分子筛及其测定方法 |
China National Standards si |
English PDF |
| GB/T 12809-2015 |
Laboratory glassware—Principles of design and construction of volumetric glassware 实验室玻璃仪器 玻璃量器的设计和结构原则 |
China National Standards si |
English PDF |
| GB 32449-2015 |
Feed additive—Magnesium sulphate 饲料添加剂 硫酸镁 |
China National Standards si |
English PDF |
| GB/T 5914.1-2015 |
Driver’s cab for locomotives—Part 1: Visibility conditions 机车司机室 第1部分：瞭望条件 |
China National Standards si |
English PDF |
| GB/T 32383-2015 |
Linear motor vehicles for urban mass transit 城市轨道交通 直线电机车辆 |
China National Standards si |
English PDF |
| GB/T 32373-2015 |
Test methods for reverse osmosis membranes 反渗透膜测试方法 |
China National Standards si |
English PDF |
| GB/T 32363.2-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards si |
English PDF |
| GB/T 32363.1-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 1: Designation system and basis for specification 塑料 聚酰胺模塑和挤出材料 第1部分：命名系统和规范基础 |
China National Standards si |
English PDF |
| GB/T 32361-2015 |
Test methods for pore size properties of membrane filters—Bubble point and mean flow pore test 分离膜孔径测试方法 泡点和平均流量法 |
China National Standards si |
English PDF |
| GB/T 32359-2015 |
Test and evaluation methods of reverse osmosis equipment for seawater desalination 海水淡化反渗透膜装置测试评价方法 |
China National Standards si |
English PDF |
| GB/T 1792-2015 |
Determination of mercaptan sulfur in gasoline,kerosine,jet,and distillate fuels—Potentiometric method 汽油、煤油、喷气燃料和馏分燃料中硫醇硫的测定 电位滴定法 |
China National Standards si |
English PDF |
| GB/Z 32332.1-2015 |
Rolling bearings—Explanatory notes on ISO 281—Part 1: Basic dynamic load rating and basic rating life 滚动轴承 对ISO 281的注释 第1部分：基本额定动载荷和基本额定寿命 |
China National Standards si |
English PDF |
| GB/T 32365-2015 |
silicone rubber compound—Classification and system nomenclature 硅橡胶混炼胶 分类与系统命名法 |
China National Standards si |
English PDF |
| GB/T 32322.2-2015 |
Rolling bearings—Profiled rail guides for linear motion rolling bearings—Part 2：Boundary dimensions and tolerances for series 4 and 5 滚动轴承 直线运动滚动支承成型导轨副 第2部分：4、5系列外形尺寸和公差 |
China National Standards si |
English PDF |
| GB/T 32322.1-2015 |
Rolling bearings—Profiled rail guides for linear motion rolling bearings—Part 1: Boundary dimensions and tolerances for series 1, 2 and 3 滚动轴承 直线运动滚动支承成型导轨副 第1部分：1、2、3系列外形尺寸和公差 |
China National Standards si |
English PDF |
| GB/T 301-2015 |
Rolling bearings—Thrust ball bearings—Boundary dimensions 滚动轴承 推力球轴承 外形尺寸 |
China National Standards si |
English PDF |
| GB/T 20056-2015 |
Rolling bearings—Radial needle roller and cage assemblies—Boundary dimensions and tolerances 滚动轴承 向心滚针和保持架组件 外形尺寸和公差 |
China National Standards si |
English PDF |
| GB/T 16750-2015 |
Electrical submersible pump units 潜油电泵机组 |
China National Standards si |
English PDF |
| GB/T 31000-2015 |
Data standard for comprehensive treatment of public security 社会治安综合治理基础数据规范 |
China National Standards si |
English PDF |
| GB/T 32320-2015 |
The basic requirements of bank branches services 银行营业网点服务基本要求 |
China National Standards si |
English PDF |
| GB/T 32316-2015 |
The procedure specification of financial leasing services 金融租赁服务流程规范 |
China National Standards si |
English PDF |
| GB/T 32315-2015 |
Basic requirements for bank industry customer service center 银行业客户服务中心基本要求 |
China National Standards si |
English PDF |
| GB/T 32313-2015 |
Personal financial business service specifications of commercial banks 商业银行个人理财服务规范 |
China National Standards si |
English PDF |
| GB/T 20013.3-2015 |
Nuclear medicine instrumentation—Routine tests—Part 3: Positron emission tomographs 核医学仪器 例行试验 第3部分：正电子发射断层成像装置 |
China National Standards si |
English PDF |
| GB 9706.16-2015 |
Medical electrical equipment—Part 2: Particular requirements for the safety of radiotherapy simulators 医用电气设备 第2部分：放射治疗模拟机安全专用要求 |
China National Standards si |
English PDF |
| GB/T 5276-2015 |
Fasteners—Bolts, screws, studs and nuts—Symbols and descriptions of dimensions 紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注 |
China National Standards si |
English PDF |
| GB/T 5069-2015 |
Chemical analysis of magnesia-alumina refractories 镁铝系耐火材料化学分析方法 |
China National Standards si |
English PDF |
| GB/T 32281-2015 |
Test method for measuring oxygen, carbon, boron and phosphorus in solar silicon wafers and feedstock by secondary ion mass spectrometry 太阳能级硅片和硅料中氧、碳、硼和磷量的测定 二次离子质谱法 |
China National Standards si |
English PDF |
| GB/T 32280-2015 |
Test method for warp of silicon wafers—Automated non-contact scanning method 硅片翘曲度测试 自动非接触扫描法 |
China National Standards si |
English PDF |
| GB/T 32279-2015 |
Specification for order entry format of silicon wafers 硅片订货单格式输入规范 |
China National Standards si |
English PDF |
| GB/T 32278-2015 |
Test methods for flatness of monocrystalline silicon carbide wafers 碳化硅单晶片平整度测试方法 |
China National Standards si |
English PDF |
| GB/T 32277-2015 |
Test method for instrumental neutron activation analysis (INAA) of silicon 硅的仪器中子活化分析测试方法 |
China National Standards si |
English PDF |
| GB/T 32264-2015 |
Method of performance testing for gas chromatography-single quadrupole mass pectrometry 气相色谱-单四极质谱仪性能测定方法 |
China National Standards si |
English PDF |
| GB/T 32221-2015 |
Vacuum technology—Vacuum thermal environmental simulation test equipment of spacecraft—General specification 真空技术 航天器用真空热环境模拟试验设备 通用技术条件 |
China National Standards si |
English PDF |
| GB/T 32179-2015 |
Chemical analysis of refractories—General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods 耐火材料化学分析 湿法、原子吸收光谱法（AAS）和电感耦合等离子体原子发射光谱法（ICP-AES）的一般要求 |
China National Standards si |
English PDF |
| GB/T 2998-2015 |
Test method for bulk density and true porosity of shaped insulating refractory products 定形隔热耐火制品体积密度和真气孔率试验方法 |
China National Standards si |
English PDF |
| GB/T 2997-2015 |
Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products 致密定形耐火制品体积密度、显气孔率和真气孔率试验方法 |
China National Standards si |
English PDF |
| GB/T 24578-2015 |
Test method for measuring surface metal contamination on silicon wafers by total reflection X-Ray fluorescence spectroscopy 硅片表面金属沾污的全反射X光荧光光谱测试方法 |
China National Standards si |
English PDF |
| GB/T 16886.7-2015 |
Biological evaluation of medical devices—Part 7: Ethylene oxide sterilization residuals 医疗器械生物学评价 第7部分：环氧乙烷灭菌残留量 |
China National Standards si |
English PDF |
| GB/T 12962-2015 |
Monocrystalline silicon 硅单晶 |
China National Standards si |
English PDF |
| GB 32311-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for hydrogen producing systems by water electrolysis 水电解制氢系统能效限定值及能效等级 |
China National Standards si |
English PDF |
| GB 32276-2015 |
Safety regulations for dust explosion protection in textile industry 纺织工业粉尘防爆安全规程 |
China National Standards si |
English PDF |
| GB 32275-2015 |
Technical specifications of pipeline safety apparatus for fire dampers and explosion protection in textile industry 纺织工业防火防爆管道安全装置技术规范 |
China National Standards si |
English PDF |
| GB 26920.2-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances—Part 2: Commercial refrigerated cabinets with self-contained condensing unit 商用制冷器具能效限定值和能效等级 第2部分：自携冷凝机组商用冷柜 |
China National Standards si |
English PDF |
| GB/T 8650-2015 |
Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards si |
English PDF |
| GB/T 32282-2015 |
Test method for disoclation density of GaN single crystal—Cathodoluminescence spectroscopy 氮化镓单晶位错密度的测量 阴极荧光显微镜法 |
China National Standards si |
English PDF |
| GB/T 32189-2015 |
Test method for surface roughness of GaN single crystal substrate by atomic force microscope 氮化镓单晶衬底表面粗糙度的原子力显微镜检验法 |
China National Standards si |
English PDF |
| GB/T 32188-2015 |
The method for full width at half maximum of double crystal X-ray rocking curve of GaN single crystal substrate 氮化镓单晶衬底片x射线双晶摇摆曲线半高宽测试方法 |
China National Standards si |
English PDF |
| GB/T 32185-2015 |
Titanium alloy large-sized bars 钛合金大规格棒材 |
China National Standards si |
English PDF |
| GB/T 14232.2-2015 |
Plastics collapsible containers for human blood and blood components—Part 2: Blood bag systems with integrated features 人体血液及血液成分袋式塑料容器 第2部分：用于标签和使用说明书的图形符号 |
China National Standards si |
English PDF |
| GB/T 30269.401-2015 |
Information technology—Sensor networks—Part 401: Collaborative information processing: Services and interfaces supporting collaborative information processing 信息技术 传感器网络 第401部分：协同信息处理：支撑协同信息处理的服务及接口 |
China National Standards si |
English PDF |
| GB/T 17969.1-2015 |
Information technology—Open systems interconnection—Procedures for the operation of Osi registration authorities—Part 1: General procedures and top arcs of the International Object Identifier tree 信息技术 开放系统互连 OSI登记机构的操作规程 第1部分：一般规程和国际对象标识符树的顶级弧 |
China National Standards si |
English PDF |
| GB/T 8243.13-2015 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 |
China National Standards si |
English PDF |
| GB/T 7963-2015 |
sintered metal materials, excluding hardmetals—Tensile test pieces 烧结金属材料（不包括硬质合金） 拉伸试样 |
China National Standards si |
English PDF |
| GB/T 5070-2015 |
Chemical analysis of refractories containing chrome 含铬耐火材料化学分析方法 |
China National Standards si |
English PDF |
| GB/T 4513.1-2015 |
Monolithic (unshaped) refractory products—Part 1: Introduction and classification 不定形耐火材料 第1部分：介绍和分类 |
China National Standards si |
English PDF |
| GB/T 3850-2015 |
Impermeable sintered metal materials and hardmetals—Determination of density 致密烧结金属材料与硬质合金 密度测定方法 |
China National Standards si |
English PDF |
| GB/T 3489-2015 |
Hardmetals—Metallographic determination of porosity and uncombined carbon 硬质合金 孔隙度和非化合碳的金相测定 |
China National Standards si |
English PDF |
| GB/T 32290-2015 |
Reduced-wall,Resilient-seated gate valves for water supply service 供水系统用弹性密封轻型闸阀 |
China National Standards si |
English PDF |
| GB/T 32274-2015 |
Building construction machinery and equipment —Pedestrian-controlled vibratory (percussion) rammers—Terminology and commercial specifications 建筑施工机械与设备 手扶随行式振动冲击夯 术语和商业规格 |
China National Standards si |
English PDF |
| GB/T 32272.1-2015 |
Powered industrial trucks—Test methods for verification of visibility—Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10t capacity 机动工业车辆 验证视野的试验方法 第1部分：起重量不大于10t的坐驾式、站驾式车辆和伸缩臂式叉车 |
China National Standards si |
English PDF |
| GB/T 32265.1-2015 |
Ease of operation of everyday products—Part 1：Design requirements for context of use and user characteristics 日用产品的易操作性 第1部分：针对使用情境和用户特征的设计要求 |
China National Standards si |
English PDF |
| GB/T 32259-2015 |
Non-destructive testing of welds—Visual testing of fusion-welded joints 焊缝无损检测 熔焊接头目视检测 |
China National Standards si |
English PDF |
| GB/T 32257-2015 |
Qualification testing of welders for fusion welding on nickel and nickel alloys 镍及镍合金熔化焊焊工技能评定 |
China National Standards si |
English PDF |
| GB/T 32255-2015 |
General martensitic stainless steel and alloy steel castings suitable for high temperature and high pressure service 高温承压马氏体不锈钢和合金钢通用铸件 |
China National Standards si |
English PDF |
| GB/T 32254-2015 |
Precision hot forging of straight bevel gear—General specifications 直齿锥齿轮精密热锻件 通用技术条件 |
China National Standards si |
English PDF |
| GB/T 32253-2015 |
Precision hot forging of straight bevel gear—Structural design specification 直齿锥齿轮精密热锻件 结构设计规范 |
China National Standards si |
English PDF |
| GB/T 32250.3-2015 |
Inspection of sprayers in use—Part 3: Air-assisted sprayers for bush and tree crops 在用喷雾机的检测 第3部分：灌木与乔木作物用风送式喷雾机 |
China National Standards si |
English PDF |
| GB/T 32220-2015 |
Taper bush—types, size and basic parameters 锥套 型式、尺寸和基本参数 |
China National Standards si |
English PDF |
| GB/T 32199-2015 |
Standard practice for general techniques for obtaining infrared spectra for qualitative analysis 红外光谱定性分析技术通则 |
China National Standards si |
English PDF |
| GB/T 32198-2015 |
Standard practice for general techniques of infrared quantitative analysis 红外光谱定量分析技术通则 |
China National Standards si |
English PDF |
| GB/T 32196-2015 |
Non-destructive testing instruments—Model designation method 无损检测仪器 型号编制方法 |
China National Standards si |
English PDF |
| GB/T 32195-2015 |
Non-destructive testing instruments—Quality inspection provisions 无损检测仪器 质量检验规则 |
China National Standards si |
English PDF |
| GB/T 32190-2015 |
Standard practice for using flame photometric detectors in gas chromatography 气相色谱用火焰光度检测器测试方法 |
China National Standards si |
English PDF |
| GB/T 32153-2015 |
Guidelines for document classification 文献分类标引规则 |
China National Standards si |
English PDF |
| Find out:17019Items | To Page of: First -Previous-Next -Last | [60] [61] [62] [63] [64] [65] [66] |
+86-755-25831330
