GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 7000.17-2003 |
Safety requirements for luminaries with limited surface temperatures 限制表面温度灯具安全要求 |
China National Standards surface |
English PDF |
GB/T 5560-2003 |
Nonionic surface active agents--Determination of polyethylene glycols and non-ionic active matter(adducts)--Weilbull method 非离子表面活性剂 聚乙二醇含量和非离子活性物(加成物)含量的测定 Weilbull法 |
China National Standards surface |
English PDF |
GB/T 5556-2003 |
surface active agents--Test method for alkaline stability 表面活性剂 耐碱性测试法 |
China National Standards surface |
English PDF |
GB/T 5555-2003 |
surface active agents--Test method for acid stability 表面活性剂 耐酸性测试法 |
China National Standards surface |
English PDF |
GB/T 19247.2-2003 |
Printed board assemblies--Part 2: Sectional specification--Requirements for surface mount solderedassemblies 印制板组装 第2部分: 分规范 表面安装焊接组装的要求 |
China National Standards surface |
English PDF |
GB/T 19247.1-2003 |
Printed board assemblies--Part 1: Generic specification--Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies 印制板组装 第1部分:通用规范 采用表面安装和相关组装技术的电子和电气焊接组装的要求 |
China National Standards surface |
English PDF |
GB/T 8098-2003 |
Hydraulic fluid power--Compensated flow control valves--Mounting surfaces 液压传动 带补偿的流量控制阀 安装面 |
China National Standards surface |
English PDF |
GB/T 19067.1-2003 |
Geometrical Product Specifications(GPS)--surface texture: Profile method--Measurement standards--Part 1: Material measures 产品几何量技术规范(GPS) 表面结构 轮廓法 测量标准 第1部分:实物测量标准 |
China National Standards surface |
English PDF |
GB/T 18778.2-2003 |
Geometrical Product Specifications(GPS)--surface texture: Profile method--Surface having stratified functional properties--Part 2: Height characterization using the linear material ratio curve 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第2部分: 用线性化的支承率曲线表征高度特性 |
China National Standards surface |
English PDF |
GB/T 18780.2-2003 |
Geometrical Product Specifications(GPS)--Geometrical features--Part 2: Extracted median line of a cylinder and a cone,extracted median surface,local size of an extracted feature 产品几何量技术规范(GPS) 几何要素 第2部分: 圆柱面和圆锥面的提取中心线、平行平面的提取中心面、提取要素的局部尺寸 |
China National Standards surface |
English PDF |
GB/T 12472-2003 |
Geometrical Product Specifications(GPS)--surface texture:Profile method--Surface roughness parameters and their values for wooden pieces 产品几何量技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度参数及其数值 |
China National Standards surface |
English PDF |
GB/T 4548.2-2003 |
Glassware--Hydrolytic resistance of the interior surfaces of glass containers--Determination by flame spectrometry and classification 玻璃制品 玻璃容器内表面耐水侵蚀性能 用火焰光谱法测定和分级 |
China National Standards surface |
English PDF |
GB 18956-2003 |
Safety of woodworking machines--surface planing and thicknessing machines 木工机床安全 平压两用刨床 |
China National Standards surface |
English PDF |
GB/T 8416-2003 |
surface colors for visual signalling 视觉信号表面色 |
China National Standards surface |
English PDF |
GB/T 9634.3-2002 |
Ferrite cores--Guide on the limits of surface irregularities--Part 3:ETD-cores and E-cores 铁氧体磁心表面缺陷极限导则 第3部分:ETD和E形磁心 |
China National Standards surface |
English PDF |
GB/T 9634.2-2002 |
Ferrite cores--Guide on thelimits of surface irregularities--Part 2:RM-cores 铁氧体磁心表面缺陷极限导则 第2部分:RM磁心 |
China National Standards surface |
English PDF |
GB/T 9634.1-2002 |
Ferrite cores--Guide on the limits of surface irregularities--Part 1:General specification 铁氧体磁心表面缺陷极限导则 第1部分:总则 |
China National Standards surface |
English PDF |
GB/T 18839.3-2002 |
Preparation of steel substrates before application of paints and related products--surface preparation methods--Hand-and power-tool cleaning 涂覆涂料前钢材表面处理 表面处理方法 手工和动力工具清理 |
China National Standards surface |
English PDF |
GB/T 18839.2-2002 |
Preparation of steel substrates before application of paints and related products--surface preparation methods--Abrasive blast-cleaning 涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理 |
China National Standards surface |
English PDF |
GB/T 18839.1-2002 |
Preparation of steel substrates before application of paints and related products--surface preparation methods--General principles 涂覆涂料前钢材表面处理 表面处理方法 总则 |
China National Standards surface |
English PDF |
GB/T 2820.10-2002 |
Reciprocating internal combustion engine driven alternating current generating sets--Part 10:Measurement of airborne noise by the enveloping surface method 往复式内燃机驱动的交流发电机组 第10部分:噪声的测量(包面法) |
China National Standards surface |
English PDF |
GB/T 18778.1-2002 |
Geometrical product specifications(GPS)--surface texture:Profile method;Surfaces having stratified functional properties--Part 1:Filtering and general measurement conditions 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第1部分:滤波和一般测量条件 |
China National Standards surface |
English PDF |
GB/T 15757-2002 |
Geometrical product specifications(GPS)--surface imperfections--Terms,definitions and parameters 产品几何量技术规范(GPS) 表面缺陷 术语、定义及参数 |
China National Standards surface |
English PDF |
GB/T 8101-2002 |
Hydraulic fluid power--Pressure-relief valves--Mounting surfaces 液压溢流阀 安装面 |
China National Standards surface |
English PDF |
GB 3838-2002 |
Environmental quality standards for surface water 地表水环境质量标准 |
China National Standards surface |
English PDF |
GB/T 18683-2002 |
Laser surface hardening of iron and steel parts 钢铁件激光表面淬火 |
China National Standards surface |
English PDF |
GB/T 8361-2001 |
The surface of cold drawn rounds steel--Method for the ultrasonic inspection 冷拉圆钢表面超声波探伤方法 |
China National Standards surface |
English PDF |
GB/T 18570.4-2001 |
Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application 涂覆涂料前钢材表面处理 表面清洁度的评定试验 涂覆涂料前凝露可能性的评定导则 |
China National Standards surface |
English PDF |
GB/T 8745-2001 |
Textiles--Burning behaviour--Determination of surface burning time of fabrics 纺织品 燃烧性能 织物表面燃烧时间的测定 |
China National Standards surface |
English PDF |
GB/T 8424.1-2001 |
Textiles--Tests for colour fastness--General principles for measurement of surface colour 纺织品 色牢度试验 表面颜色的测定通则 |
China National Standards surface |
English PDF |
GB/T 5779.3-2000 |
Fasteners--surface discontinuities--Bolts,screws and studs for special requirements 紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求 |
China National Standards surface |
English PDF |
GB/T 5779.2-2000 |
Fasteners--surface discontinuities--Nuts 紧固件表面缺陷 螺母 |
China National Standards surface |
English PDF |
GB/T 5779.1-2000 |
Fasteners--surface discontinuities--Bolts,screws and studs for general requirements 紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求 |
China National Standards surface |
English PDF |
GB/T 3098.17-2000 |
Mechanical properties of fasteners--Preloading test for the detection of hydrogen embrittlement--Parallel bearing surface method 紧固件机械性能 检查氢脆用预载荷试验 平行支承面法 |
China National Standards surface |
English PDF |
GB/T 18153-2000 |
Safety of machinery--Temperatures of touchable surfaces--Ergonomics data to establish temperature limit values for hot surfaces 机械安全 可接触表面温度 确定热表面温度限值的工效学数据 |
China National Standards surface |
English PDF |
GB/T 17949.1-2000 |
Guide for measuring earth resistivity,ground impedance and earth surface potentials of a ground system--Part 1:Normal measurements 接地系统的土壤电阻率、接地阻抗和地面电位测量导则 第1部分:常规测量 |
China National Standards surface |
English PDF |
GB/T 12128.2-1999 |
Reference sources for the calibration of surface contamination monitors--Part 2:Electrons of energy less than 0.15MeV and photons of energy less than 1.5MeV 用于校准表面污染监测仪的参考源 第2部分:能量低于0.15MeV的电子和能量低于1.5MeV的光子 |
China National Standards surface |
English PDF |
GB/T 17879-1999 |
Gears--surface temper etch inspection after grinding 齿轮 磨削后表面回火的浸蚀检验 |
China National Standards surface |
English PDF |
GB/T 17831-1999 |
Non-ionic surface active agents--Determination of sulfated ash--Gravimetric method 非离子表面活性剂 硫酸化灰分的测定(重量法) |
China National Standards surface |
English PDF |
GB/T 17770-1999 |
Freight containers--Air/surface (intermodal) general purpose containers--Specification and tests 集装箱 空/陆/水(联运)通用集装箱技术要求和试验方法 |
China National Standards surface |
English PDF |
GB/T 5550-1998 |
surface active agents--Determination of dispersing power 表面活性剂 分散力测定方法 |
China National Standards surface |
English PDF |
GB/T 17487-1998 |
Hydraulic fluid power--Four-and five-port servovalves--Mounting surfaces 四油口和五油口液压伺服阀 安装面 |
China National Standards surface |
English PDF |
GB 17381-1998 |
The regulation for surface colours of the visual aids to navigation in China 中国海区视觉航标表面色规定 |
China National Standards surface |
English PDF |
GB/T 6060.1-1997 |
Roughness comparison specimens--Cast surfaces 表面粗糙度比较样块 铸造表面 |
China National Standards surface |
English PDF |
GB 16933-1997 |
Acceptance criteria for near surface disposal of radioactive waste 放射性废物近地表处置的废物接收准则 |
China National Standards surface |
English PDF |
GB/T 16601-1996 |
Test methods for laser induced damage threshold of optical surfaces--Part 1: 1 on 1 test 光学表面激光损伤阈值测试方法 第1部分:1对1测试 |
China National Standards surface |
English PDF |
GB/T 16527-1996 |
Specification for photoresist/E-beam resist for hard surface photoplates 硬面感光板中光致抗蚀剂和电子束抗蚀剂规范 |
China National Standards surface |
English PDF |
GB/T 6473-1996 |
Vertical surface broaching machines--Testing of the accuracy 立式外拉床 精度检验 |
China National Standards surface |
English PDF |
GB/T 3768-1996 |
Acoustics--Determination of sound power levels of noise sources using sound pressure--Survey method using an enveloping measurement surface over a reflecting plane 声学 声压法测定噪声源声功率级 反射面上方采用包络测量表面的简易法 |
China National Standards surface |
English PDF |
GB/T 16168-1996 |
Accelerated test methods for atmospheric surface coating systems for offshore structures 海洋结构物大气段用涂料加速试验方法 |
China National Standards surface |
English PDF |
GB/T 15871-1995 |
Hard surface photomask substrates 硬面光掩模基板 |
China National Standards surface |
English PDF |
GB/T 15870-1995 |
Chrome thin films for hard surface photomasks 硬面光掩模用铬薄膜 |
China National Standards surface |
English PDF |
GB/T 5816-1995 |
Catalysts and absorbents--Determination of surface area 催化剂和吸附剂表面积测定法 |
China National Standards surface |
English PDF |
GB/T 16143-1995 |
Charcoal canister method for measuring 222Rn exhalation rate from building surface 建筑物表面氡析出率的活性炭测量方法 |
China National Standards surface |
English PDF |
GB/T 15950-1995 |
General requirements for environmental radiation monitoring around near surface disposal site of low-intermediate level radioactive solid waste 低、中水平放射性废物近地表处置场环境辐射监测的一般要求 |
China National Standards surface |
English PDF |
GB/T 5173-1995 |
surface active agents and detergents--Determination of anionic-active matter by direct two-phase titration procedure 表面活性剂和洗涤剂 阴离子活性物的测定 直接两相滴定法 |
China National Standards surface |
English PDF |
GB/T 4548-1995 |
Test method and classification for hydrolytic resistance of the interior surfaces of glass containers 玻璃容器内表面耐水侵蚀性能测试方法及分级 |
China National Standards surface |
English PDF |
GB/T 15056-1994 |
Evaluation method on cast surface roughness 铸造表面粗糙度 评定方法 |
China National Standards surface |
English PDF |
GB/T 7462-1994 |
surface active agents--Measurement of foaming power--Modified Ross-miles method 表面活性剂 发泡力的测定 改进Ross-Miles法 |
China National Standards surface |
English PDF |
GB/T 14235.5-1993 |
Testing method for surface hardness of pattern materials in investment casting 熔模铸造模料 表面硬度测定方法 |
China National Standards surface |
English PDF |
GB/T 14234-1993 |
surface roughness for plastic parts 塑料件表面粗糙度 |
China National Standards surface |
English PDF |
GB/T 14229-1993 |
Standard of test method for surface load capacity of gears 齿轮接触疲劳强度试验方法 |
China National Standards surface |
English PDF |
GB/T 13841-1992 |
surface roughness for electronic ceramic parts 电子陶瓷件表面粗糙度 |
China National Standards surface |
English PDF |
GB/T 12767-1991 |
Powder metallurgy products--surface roughness--Parameters and their values 粉末冶金制品 表面粗糙度 参数及其数值 |
China National Standards surface |
English PDF |
GB/T 12128-1989 |
Reference sources for the calibration of surface contamination monitors--Beta-emitters and alpha-emitters 用于校准表面污染监测仪的参考源 β发射体和α发射体 |
China National Standards surface |
English PDF |
GB/T 11987-1989 |
surface active agent--Technical alkane sulphonates--Determination of total alkane sulphonates content 表面活性剂 工业烷烃磺酸盐 总烷烃磺酸盐含量的测定 |
China National Standards surface |
English PDF |
GB/T 11986-1989 |
surface active agents--Powders and Granules--Measurement of the angle of repose 表面活性剂 粉体和颗粒休止角的测量 |
China National Standards surface |
English PDF |
GB/T 11985-1989 |
surface active agents--Determination of interfacial tension--Drop volume method 表面活性剂 界面张力的测定 滴体积法 |
China National Standards surface |
English PDF |
GB/T 11373-1989 |
The general principle of surface preparation of metallic substrate for thermal spraying 热喷涂金属件表面预处理通则 |
China National Standards surface |
English PDF |
GB/T 11107-1989 |
Metallic and its compound powder--Determination of specific surface and particle size by air permeating method 金属及其化合物粉末 比表面积和粒度测定 空气透过法 |
China National Standards surface |
English PDF |
GB 6951-1986 |
Safe surface voltage of light fuel oil in tank filling operation 轻质油品装油安全油面电位值 |
China National Standards surface |
English PDF |
GB/T 6753.2-1986 |
Paints and varnishes--surface-drying test--Ballotini method 涂料表面干燥试验 小玻璃球法 |
China National Standards surface |
English PDF |
GB/T 5328-1985 |
surface active agents--Simplified classification 表面活性剂简化分类 |
China National Standards surface |
English PDF |
Find out:673Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 |