Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 13969-2008 |
Displacement type level instruments 浮筒式液位仪表 |
China National Standards type |
 English PDF |
| GB/T 6380-2008 |
Statistical interpretation of data - Detection and treatment of outliers in the sample from typeⅠextreme value distribution 数据的统计处理和解释 Ⅰ型极值分布样本离群值的判断和处理 |
China National Standards type |
English PDF |
| GB/T 16573-2008 |
Micrographics - Microfilming of documents on 16 mm and 35 mmsilver-gelatin type microfilm - Operating procedures 缩微摄影技术 在16mm和35mm银-明胶型 缩微胶片上拍摄文献的操作程序 |
China National Standards type |
English PDF |
| GB/T 13251-2008 |
Packing - Steel drums - Iinserted flange-type closure 包装 钢桶 嵌入式法兰封闭器 |
China National Standards type |
English PDF |
| GB/T 5184-2008 |
Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions 叉车 挂钩型货叉和货叉架 安装尺寸 |
China National Standards type |
English PDF |
| GB/T 3235-2008 |
Basic types sizes parameters and characteristies curve of fans 通风机基本型式、尺寸参数及性能曲线 |
China National Standards type |
English PDF |
| GB/T 1592.3-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 3: Main PTO dimensions and spline dimensions, location of PTO 农业拖拉机后置动力输出轴1、2和3型 第3部分：动力输出轴尺寸和花键尺寸、动力输出轴位置 |
China National Standards type |
English PDF |
| GB/T 1592.2-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 2 部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards type |
English PDF |
| GB/T 1592.1-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards type |
English PDF |
| GB/T 8117.2-2008 |
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines 汽轮机热力性能验收试验规程 第2部分: 方法B 各种类型和容量的汽轮机宽准确度试验 |
China National Standards type |
English PDF |
| GB/T 9877-2008 |
Hydraulic fluid power - Guide specifications for designing rotary shaft lip type seals 液压传动 旋转轴唇形密封圈设计规范 |
China National Standards type |
English PDF |
| GB/T 22072-2008 |
Specifications and technical requirements for dry-type amorphous alloy core distribution transformers 干式非晶合金铁心配电变压器技术参数和要求 |
China National Standards type |
English PDF |
| GB/T 13026-2008 |
types and dimensions of a.c. capacitance graded bushings 交流电容式套管型式与尺寸 |
China National Standards type |
English PDF |
| GB/T 11132-2008 |
Standard test method for hydrocarbon types in liquid petroleum products by fluorescent indicator adsorption 液体石油产品烃类的测定 荧光指示剂吸附法 |
China National Standards type |
English PDF |
| GB/T 22065-2008 |
Pressure type SF6 gas density monitor 压力式六氟化硫气体密度控制器 |
China National Standards type |
English PDF |
| GB/T 22063-2008 |
Microscopes - Interfacing connection type C 显微镜 C型接口 |
China National Standards type |
English PDF |
| GB/T 22055.2-2008 |
Microscopes - Screw threads for objectives and related nosepieces - Part 2: Screw thread type M25×0.75mm 显微镜 物镜螺纹 第2部分：M25×0.75mm型物镜螺纹 |
China National Standards type |
English PDF |
| GB/T 22055.1-2008 |
Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5in×1/36in) 显微镜 物镜螺纹 第1部分：RMS型物镜螺纹（4/5in×1/36in） |
China National Standards type |
English PDF |
| GB/T 7269-2008 |
Arrangement,types and basic dimensions of consoles for electronic equipments 电子设备控制台的布局、型式和基本尺寸 |
China National Standards type |
English PDF |
| GB/T 13826-2008 |
Wet type (non-metallic)friction materials 湿式(非金属类)摩擦材料 |
China National Standards type |
English PDF |
| GB/T 8660-2008 |
Rubber，butadiene(BR) - Solution-polymerized types - Evaluation procedures 溶液聚合型丁二烯橡胶(BR)评价方法 |
China National Standards type |
English PDF |
| GB/T 5577-2008 |
Codification of types for synthetic rubbers 合成橡胶牌号规范 |
China National Standards type |
English PDF |
| GB/T 2900.79-2008 |
Electrotechnical terminology - Electrical and electronic measurements and measuring instruments - Part 3：types of electrical measuring instruments 电工术语 电工电子测量和仪器仪表 第3部分：电测量仪器仪表的类型 |
China National Standards type |
English PDF |
| GB/T 18882.2-2008 |
Chemical analysis methods for mixed rare earth oxide of ion-absorpted type RE ore - Determination of aluminum oxide content 离子型稀土矿混合稀土氧化物化学分析方法 三氧化二铝量的测定 |
China National Standards type |
English PDF |
| GB/T 18882.1-2008 |
Chemical analysis methods of mixed rare earth oxide of ion-absorpted type RE ore - Determination of fifteen REO relative content 离子型稀土矿混合稀土氧化物化学分析方法 十五个稀土元素氧化物配分量的测定 |
China National Standards type |
English PDF |
| GB/T 21978.6-2008 |
Intrument for precipitation observation - Part 6: Melted snow type rain and snow recorder 降水量观测仪器 第6部分：融雪型雨雪量计 |
China National Standards type |
English PDF |
| GB/T 21440.3-2008 |
Instrument for dam monitoring - Settlement gauge - Part 3：Hydraulic pressure type settlement gauge 大坝监测仪器 沉降仪 第3部分：液压式沉降仪 |
China National Standards type |
English PDF |
| GB/T 21440.2-2008 |
Instrument for dam monitoring - Settlement gauge - Part 2：Electromagnetism type settlement gauge 大坝监测仪器 沉降仪 第2部分：电磁式沉降仪 |
China National Standards type |
English PDF |
| GB/T 6110-2008 |
Carbide dies for drawing - types and dimensions 硬质合金拉制模 型式和尺寸 |
China National Standards type |
English PDF |
| GB/T 970.1-2008 |
Circular screwing dies - Part 1: The types and dimensions for circular screwing dies and die stocks 圆板牙 第1部分：圆板牙和圆板牙架的型式和尺寸 |
China National Standards type |
English PDF |
| GB/T 8498-2008 |
Earth-moving machinery - Basic type - Identification and terms and definitions 土方机械 基本类型 识别、术语和定义 |
China National Standards type |
English PDF |
| GB/T 21941-2008 |
Earth-moving machinery - Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders 土方机械 液压挖掘机和挖掘装载机的反铲斗和抓铲斗 容量标定 |
China National Standards type |
English PDF |
| GB/T 16456.3-2008 |
End mills with brazed helical hardmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分：莫氏锥柄立铣刀 型式和尺寸 |
China National Standards type |
English PDF |
| GB/T 10940-2008 |
Reciprocation type grass cutter 往复式割草机 |
China National Standards type |
English PDF |
| GB/T 10646-2008 |
Electric heating food ovens - types and principal parameters 电热食品烤炉型式与主要参数 |
China National Standards type |
English PDF |
| GB/T 21986-2008 |
Assessment of agroclimate impact: classfication method of annual crop climate types 农业气候影响评价：农作物气候年型划分方法 |
China National Standards type |
English PDF |
| GB/T 18224-2008 |
Safety code for the bridge type grab ship unloader 桥式抓斗卸船机安全规程 |
China National Standards type |
English PDF |
| GB/T 8289-2008 |
Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specification 浓缩天然胶乳 氨保存离心或膏化胶乳 规格 |
China National Standards type |
English PDF |
| GB/T 21283.5-2008 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections 密封元件为热塑性材料的旋转轴唇形密封圈 第5部分 外观缺陷的识别 |
China National Standards type |
English PDF |
| GB/T 21283.4-2008 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures 密封元件为热塑性材料的旋转轴唇形密封圈 第4部分：性能试验程序 |
China National Standards type |
English PDF |
| GB/T 21283.3-2008 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3 :Storage，handling and installation 密封元件为热塑性材料的旋转轴唇形密封圈 第3部分：贮存、搬运和安装 |
China National Standards type |
English PDF |
| GB/T 1710-2008 |
Comparison of resistance to light of coloured pigments of similar types 同类着色颜料耐光性比较 |
China National Standards type |
English PDF |
| GB/T 13871.3-2008 |
Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 3: Storage，handling and installation 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分：贮存、搬运和安装 |
China National Standards type |
English PDF |
| GB/T 21717-2008 |
Technical specification about the type parameter and performance of small hydraulic turbines 小型水轮机型式参数及性能 技术规定 |
China National Standards type |
English PDF |
| GB/T 19148.5-2008 |
types and dimensions of lampholders - Part 5: Bayonet lampholders 灯座的型式和尺寸 第5部分: 卡口式灯座 |
China National Standards type |
English PDF |
| GB/T 19148.2-2008 |
types and dimensions of lampholders - Part 2:Pin lampholders 灯座的型式和尺寸 第2部分:插脚式灯座 |
China National Standards type |
English PDF |
| GB/T 19148.1-2008 |
types and dimensions of lampholder - Part 1：Screw lampholder 灯座的型式和尺寸 第1部分：螺口式灯座 |
China National Standards type |
English PDF |
| GB/T 1406.5-2008 |
types and dimensions of lamp caps - Part 5：Bayonet caps 灯头的型式和尺寸 第5部分：卡口式灯头 |
China National Standards type |
English PDF |
| GB/T 1406.4-2008 |
types and dimensions of lamp caps - Part 4: Miscellaneous caps 灯头的型式和尺寸 第4部分：杂类灯头 |
China National Standards type |
English PDF |
| GB/T 1406.3-2008 |
types and dimensions of lamp caps - Part 3：Prefocus caps 灯头的型式和尺寸 第3部分：预聚焦式灯头 |
China National Standards type |
English PDF |
| GB/T 1406.2-2008 |
types and dimentions of lamp caps - Part 2：Pin lamp caps 灯头的型式和尺寸 第2部分：插脚式灯头 |
China National Standards type |
English PDF |
| GB/T 1406.1-2008 |
types and dimensions of lamp caps - Part 1：Screw caps 灯头的型式和尺寸 第1部分：螺口式灯头 |
China National Standards type |
English PDF |
| GB/T 997-2008 |
Rotating electrical machines - Classification of types of construction ，mounting arrangements and terminal box position for(IM Code) 旋转电机结构型式、安装型式及接线盒位置的分类（IM代码） |
China National Standards type |
English PDF |
| GB/T 21647-2008 |
B-ISDN ATM Adaptation Layer Specification : type 2 AAL B-ISDN ATM 适配层(AAL)类型2技术规范 |
China National Standards type |
English PDF |
| GB/T 21531-2008 |
MFBD type steel wire knotter MFBD型钢丝打扣机 |
China National Standards type |
English PDF |
| GB/T 17858.1-2008 |
packaging - Sacks - Vocabulary and types - Part 1：paper sacks 包装袋 术语和类型 第1部分：纸袋 |
China National Standards type |
English PDF |
| GB/T 8413-2008 |
Marine self-priming centrifugal-oil pump CZY-type CZY型船用自吸离心式油泵 |
China National Standards type |
English PDF |
| GB/T 11800-2008 |
Marine explosion-proof type axial flow fans 船用防爆轴流通风机 |
China National Standards type |
English PDF |
| GB/T 11799-2008 |
Marine explosion-proof type centrifugal fans 船用防爆离心通风机 |
China National Standards type |
English PDF |
| GB/T 3632-2008 |
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures 钢结构用扭剪型高强度螺栓连接副 |
China National Standards type |
English PDF |
| GB/T 7813-2008 |
Rolling bearings - Split type plummer block housings - Boundary dimensions 滚动轴承 剖分立式轴承座 外形尺寸 |
China National Standards type |
English PDF |
| GB/T 2780-2008 |
Drawbars for agricultural tractors － types dimensionsand mounting requirements 农业拖拉机 牵引装置型式尺寸和安装要求 |
China National Standards type |
English PDF |
| GB/T 21403-2008 |
Irrigation equipment - Differential pressure Venturi-type liquid additive injectors 喷灌设备 文丘里式差压液体添加射流器 |
China National Standards type |
English PDF |
| GB/T 7403.2-2008 |
Lead-acid traction batteries - Part 2: Product types and specifications 牵引用铅酸蓄电池 第2部分: 产品品种和规格 |
China National Standards type |
English PDF |
| GB/T 21283.2-2007 |
Rotary shaft lip-type seals incorporating thermoplastic sealing element - Part 2：Vocabulary 密封元件为热塑性材料的旋转轴唇形密封圈 第2部分：词汇 |
China National Standards type |
English PDF |
| GB/T 21283.1-2007 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements－Part 1: Nominal dimensions and tolerances 密封元件为热塑性材料的旋转轴唇形密封圈 第1部分：基本尺寸和公差 |
China National Standards type |
English PDF |
| GB/T 13871.4-2007 |
Rotary shaft lip type seals incorporating elastomeric sealing elements - Part 4：Performance test procedures 密封元件为弹性体材料的旋转轴唇形密封圈 第4部分：性能试验程序 |
China National Standards type |
English PDF |
| GB/T 13871.1-2007 |
Rotary shaft lip type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances 密封元件为弹性体材料的旋转轴唇形密封圈 第1部分：基本尺寸和公差 |
China National Standards type |
English PDF |
| GB/T 21161-2007 |
Agricultural trailers - Single-acting telescopic tipping cylinders - 25MPa(250bar)series - types1，2and3 - Interchangeability dimensions 农用挂车 单作用套筒伸缩油缸25MPa（250bar）系列Ⅰ型、Ⅱ型和Ⅲ型互换尺寸 |
China National Standards type |
English PDF |
| GB/T 21159.2-2007 |
Equipment for sowing and planting - Disk - part 2: Flat disks type D2 with single bevel - Dimensions 播种和种植机械 圆盘 第2部分：D2型单边倒角的平面圆盘 尺寸 |
China National Standards type |
English PDF |
| GB/T 21159.1-2007 |
Equipment for sowing and planting - Disks - part 1: Concave disks type D1 - Dimensions 播种和种植机械 圆盘 第1部分：D1型凹面圆盘 尺寸 |
China National Standards type |
English PDF |
| GB/T 14805.9-2007 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 9: Security Key and certificate management message (message type-KEYMAN) 行政、商业和运输业电子数据交换（EDIFACT）应用级语法规则(语法版本号:4，语法发布号:1) 第9部分: 安全密钥和证书管理报文(报文类型为KEYMAN) |
China National Standards type |
English PDF |
| GB/T 14805.6-2007 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 6: Secure authentication and acknowledgement message(message type - AUTACK) 行政、商业和运输业电子数据交换（EDIFACT） 应用级语法规则(语法版本号:4，语法发布号:1) 第6部分: 安全鉴别和确认报文(报文类型为AUTACK) |
China National Standards type |
English PDF |
| GB/T 6124-2007 |
T-slot cutters - types and sizes T型槽铣刀 型式和尺寸 |
China National Standards type |
English PDF |
| GB/T 14805.4-2007 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 4: Syntax and service report message for batch EDI (Message type_CONTRL） 行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第4部分: 批式电子数据交换语法和服务报告报文(报文类型为CONTRL) |
China National Standards type |
English PDF |
| GB/T 11313.4-2007 |
Radio-frequency connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (type 7-16) 射频连接器 第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards type |
English PDF |
| GB/T 11313.2-2007 |
Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors for type 9.52 射频连接器 第2部分: 9.52型射频同轴连接器分规范 |
China National Standards type |
English PDF |
| GB/T 20969.3-2007 |
Special environmental condition - Machinery for plateau - Part 3: The specification of select type and acceptance check for construction machinery on plateau 特殊环境条件 高原机械 第3部分：高原型工程机械选型、验收规范 |
China National Standards type |
English PDF |
| GB/T 6138.2-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分：莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards type |
English PDF |
| GB/T 6138.1-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分：直柄阶梯麻花钻的型式和尺寸 |
China National Standards type |
English PDF |
| GB/T 20958.2-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 2: Milling machines with vertical spindle 数控床身铣床检验条件 精度检验 第2部分: 立式铣床 |
China National Standards type |
English PDF |
| GB/T 20958.1-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 1: Milling machines with horizontal spindle 数控床身铣床检验条件 精度检验 第1部分: 卧式铣床 |
China National Standards type |
English PDF |
| GB/T 20947-2007 |
Short-link chain for lifting purposes - Grade T,(types T,DAT and DT),fine-tolerance hoist chain 起重用短环链 T级(T、DAT和DT型)高精度葫芦链 |
China National Standards type |
English PDF |
| GB/T 14661-2007 |
Cartridges, type A,for indexable inserts 可转位A型刀夹 |
China National Standards type |
English PDF |
| GB/T 1124.1-2007 |
Convex and concave milling cutters - Part1：The types and dimensions 凸凹半圆铣刀 第1部分：型式和尺寸 |
China National Standards type |
English PDF |
| GB/T 21029-2007 |
The series and type spectrum of geotechnical engineering instrument 岩土工程仪器系列型谱 |
China National Standards type |
English PDF |
| GB 1094.11-2007 |
Power transforments - Part 11: Dry-type transformers 电力变压器 第11部分：干式变压器 |
China National Standards type |
English PDF |
| GB/T 17564.5-2007 |
Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema 电气元器件的标准数据元素类型和相关分类模式 第5部分: EXPRESS 字典模式扩展 |
China National Standards type |
English PDF |
| GB 3883.3-2007 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for grinders, polishers and disk-type sanders 手持式电动工具的安全 第二部分：砂轮机、抛光机和盘式砂光机的专用要求 |
China National Standards type |
English PDF |
| GB/T 5341.1-2006 |
Side and face milling cutters with indexable inserts - Part 1: types and dimensions 可转位三面刃铣刀 第1部分：型式和尺寸 |
China National Standards type |
English PDF |
| GB/T 9481-2006 |
Axial-flow pump of medium-small size - types and basic parameters 中小型轴流泵 型式与基本参数 |
China National Standards type |
English PDF |
| GB/T 5053.2-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage 道路车辆 牵引车与挂车之间电连接器 7芯12V标准型（12N） |
China National Standards type |
English PDF |
| GB/T 5053.1-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage 道路车辆 牵引车与挂车之间电连接器 7芯24V标准型(24N) |
China National Standards type |
English PDF |
| GB/T 20663-2006 |
Bladder type accumulators 囊式蓄能用压力容器 |
China National Standards type |
English PDF |
| GB/T 20626.2-2006 |
Specific environmental condition - Electrical and electronic products for plateau - Part 2: Selective types and testing specification 特殊环境条件 高原电工电子产品 第2部分：选型和检验规范 |
China National Standards type |
English PDF |
| GB/T 20639-2006 |
Artificial pollution testing of non-linear resistor type gapped arresters 有间隙阀式避雷器人工污秽试验 |
China National Standards type |
English PDF |
| GB/T 20636-2006 |
Connecting device - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Particular requirements for conductors above 35mm2 up to 300mm2 连接器件 电气铜导线 螺纹型和非螺纹型夹紧件的安全要求 适用于35mm2以上至300mm2导线的特殊要求 |
China National Standards type |
English PDF |
| GB/Z 20541.2-2006 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems type 10：PROFINET Specification - Part 2: Application Layer protocol specification 测量和控制数字数据通信 工业控制系统用现场总线 类型10：PROFINET规范 第2部分：应用层协议规范 |
China National Standards type |
English PDF |
| GB/Z 20541.1-2006 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems type 10：PROFINET Specification - Part 1: Application layer service definition 测量和控制数字数据通信 工业控制系统用现场总线 类型10：PROFINET规范 第1部分：应用层服务定义 |
China National Standards type |
English PDF |
| GB/T 20540.6-2006 |
Digital data communication for measurement and control - Fieldbus for use in industrial systems type 3: PROFIBUS specification - Part 6: Application layer protocol specification 测量和控制数字数据通信 工业控制系统用现场总线 类型3：PROFIBUS规范 第6部分：应用层协议规范 |
China National Standards type |
English PDF |
| Find out:931Items | To Page of: First -Previous-Next -Last | [1] [2] [3] [4] [5] [6] [7] |
+86-755-25831330
