Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 7497.1-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 1: Functional description with electrical and timing specifications 微处理器系统总线 8位及16位数据(MULTIBUS I) 第１部分: 电气与定时规范的功能描述 |
China National Standards with |
 English PDF |
| GB/T 2407-2008 |
Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod 塑料 硬质塑料小试样与炽热棒接触时燃烧特性的测定 |
China National Standards with |
English PDF |
| GB/T 22275.3-2008 |
Requirements of conduct for good laboratory practice - Part 3: Compliance of laboratory suppliers with GLP principles 良好实验室规范实施要求 第3部分：实验室供应商对良好实验室规范原则的符合情况 |
China National Standards with |
English PDF |
| GB/T 22272-2008 |
Advisory document for good laboratory practice : Establishment and control of archives that operate in compliance with the principles of GLP 良好实验室规范建议性文件 建立和管理符合良好实验室规范原则的档案 |
China National Standards with |
English PDF |
| GB/T 1036-2008 |
Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer 塑料 -30℃～30℃线膨胀系数的测定 石英膨胀计法 |
China National Standards with |
English PDF |
| GB/T 22219-2008 |
Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements imposed on the test bench 船舶与海上技术 配有弹性密封件的金属管路附件耐火性能 试验台要求 |
China National Standards with |
English PDF |
| GB/T 22218-2008 |
Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods 船舶与海上技术 配有弹性密封件的金属管路附件耐火性能 试验方法 |
China National Standards with |
English PDF |
| GB/T 13576.4-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances 锯齿形(3°、30°)螺纹 第4部分：公差 |
China National Standards with |
English PDF |
| GB/T 13576.3-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions 锯齿形(3°、30°)螺纹 第3部分：基本尺寸 |
China National Standards with |
English PDF |
| GB/T 13576.2-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 2: General plan 锯齿形(3°、30°)螺纹 第2部分：直径与螺距系列 |
China National Standards with |
English PDF |
| GB/T 13576.1-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles 锯齿形(3°、30°)螺纹 第1部分：牙型 |
China National Standards with |
English PDF |
| GB/T 17590-2008 |
Three-piece can with aluminum easy open end 铝易开盖三片罐 |
China National Standards with |
English PDF |
| GB/T 13144-2008 |
Packaging containers - Cases with plybamboo 包装容器 竹胶合板箱 |
China National Standards with |
English PDF |
| GB/T 16935.5-2008 |
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2mm 低压系统内设备的绝缘配合 第5部分：不超过2mm的电气间隙和爬电距离的确定方法 |
China National Standards with |
English PDF |
| GB/T 12355-2008 |
Micrographics - Splices of microfilm with image - Dimensions and Operational Constraints 缩微摄影技术 有影像缩微胶片的连接 |
China National Standards with |
English PDF |
| GB/T 22186-2008 |
Information Security techniques Security technical requirements for IC card chip with CPU(EAL4+) 信息安全技术 具有中央处理器的集成电路（IC）卡芯片安全技术要求(评估保证级4增强级) |
China National Standards with |
English PDF |
| GB/T 20002.2-2008 |
Drafting for special aspects in standards - Part 2: The needs of older persons and persons with disabilities 标准中特定内容的起草 第2部分：老年人和残疾人的需求 |
China National Standards with |
English PDF |
| GB/T 5023.7-2008 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 7：Flexible cables screened and unscreened with two or more conductors 额定电压450/750V及以下聚氯乙烯绝缘电缆 第7部分：二芯或多芯屏蔽和非屏蔽软电缆 |
China National Standards with |
English PDF |
| GB/T 11018.2-2008 |
Copper winding wires with silk covering - Part 2: Bunched solderable polyurethane enamelled round copper wires, class130, with silk covering 丝包铜绕组线 第2部分：130级丝包直焊聚氨酯漆包束线 |
China National Standards with |
English PDF |
| GB/T 11018.1-2008 |
Copper winding wires with silk covering - Part 1: Single wire with silk covering 丝包铜绕组线 第1部分：丝包单线 |
China National Standards with |
English PDF |
| GB/T 9331-2008 |
Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1kV and 3 kV 船舶电气装置 额定电压1kV和3kV挤包绝缘非径向电场单芯和多芯电力电缆 |
China National Standards with |
English PDF |
| GB/T 8287.2-2008 |
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 2: Dimensions and characteristics 标称电压高于1000V系统用户内和户外支柱绝缘子 第2部分：尺寸与特性 |
China National Standards with |
English PDF |
| GB/T 8287.1-2008 |
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 1: Test on insulators of ceramic material or glass 标称电压高于1000V系统用户内和户外支柱绝缘子 第1部分：瓷或玻璃绝缘子的试验 |
China National Standards with |
English PDF |
| GB/T 22079-2008 |
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definitions, test methods and acceptance criteria 标称电压高于1000V使用的户内和户外聚合物绝缘子 一般定义、试验方法和接收准则 |
China National Standards with |
English PDF |
| GB/T 22078.3-2008 |
Power cables with cross-linked polyethylene insulation and theiraccessories for rated voltage of 500kV(Um=550kV) - Part 3: Accessories for power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第3部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆附件 |
China National Standards with |
English PDF |
| GB/T 22078.2-2008 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV (Um=550kV) - Part2: Power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第2部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆 |
China National Standards with |
English PDF |
| GB/T 22078.1-2008 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV(Um=550kV) - Part 1: Power cable systems-cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV (Um=550kV) - 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第1部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 试验方法和要求 |
China National Standards with |
English PDF |
| GB/T 17393-2008 |
Specification for thermal insulation for use in contact with austenitic stainless steel 覆盖奥氏体不锈钢用绝热材料规范 |
China National Standards with |
English PDF |
| GB/T 14316-2008 |
PVC insulated ribbon cable with a pitch of 1,27 mm suitable for insulation displacement termination 间距1.27mm绝缘刺破型端接式聚氯乙烯绝缘带状电缆 |
China National Standards with |
English PDF |
| GB/T 12976.3-2008 |
Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 3: Test on cables and their accessories 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第3部分：电缆和附件试验 |
China National Standards with |
English PDF |
| GB/T 12976.2-2008 |
Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 2: General and construction requirements for power cables with rated voltages 35kV 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第2部分：额定电压35kV电缆一般规定和结构要求 |
China National Standards with |
English PDF |
| GB/T 12976.1-2008 |
Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 1: General and construction requirements for power cables with rated voltages up to and including 30kV 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第1部分：额定电压30kV及以下电缆一般规定和结构要求 |
China National Standards with |
English PDF |
| GB/T 12972.7-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 6：Flexible cables with screens for rated voltages up to 6/10kV 矿用橡套软电缆 第7部分：额定电压6/10kV及以下屏蔽橡套软电缆 |
China National Standards with |
English PDF |
| GB/T 12972.6-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 6：Flexible cables with monitoring core and metallic screens for rated voltages up to 6/10kV 矿用橡套软电缆 第6部分：额定电压6/10kV及以下金属屏蔽监视型软电缆 |
China National Standards with |
English PDF |
| GB/T 12972.4-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 4：Flexible coalcutter cables with individual metallic screens for rated voltages up to 1.9/3.3kV 矿用橡套软电缆 第4部分：额定电压1.9/3.3kV及以下采煤机金属屏蔽软电缆 |
China National Standards with |
English PDF |
| GB/T 12972.3-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 3：Trailing coalcutter cables with monitoring core and semiconducting screens for rated voltage of 0.66/1.14kV 矿用橡套软电缆 第3部分: 额定电压0.66/1.14kV 采煤机屏蔽监视加强型软电缆 |
China National Standards with |
English PDF |
| GB/T 12528-2008 |
Rail vehicle cables with rated voltages up to and including 3kV 交流额定电压3kV及以下轨道交通车辆用电缆 |
China National Standards with |
English PDF |
| GB/T 22137.2-2008 |
Valve positiongers for use in industrial-process control system - Part 2: Methods of evaluating the performance of intelligent value positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第2部分：气动输出智能阀门定位器性能评定方法 |
China National Standards with |
English PDF |
| GB/T 22137.1-2008 |
Valve positiongers for use in industrial-process control system - Part 1: Methods of evaluating the performance of valve positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第1部分：气动输出阀门定位器性能评定方法 |
China National Standards with |
English PDF |
| GB/T 13639-2008 |
Digital indicators with analogue input for use in industrial-process measurement and control systems 工业过程测量和控制系统用模拟输入数字式指示仪 |
China National Standards with |
English PDF |
| GB/T 7940.2-2008 |
Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector 气动 五气口方向控制阀 第2部分：带可选电气接头的安装面 |
China National Standards with |
English PDF |
| GB/T 7940.1-2008 |
Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector 气动 五气口方向控制阀 第1部分：不带电气接头的安装面 |
China National Standards with |
English PDF |
| GB/T 22094-2008 |
Height measuring instrument with electronic digital display 电子数显测高仪 |
China National Standards with |
English PDF |
| GB/T 22093-2008 |
Internal micrometer with electronic digital display 电子数显内径千分尺 |
China National Standards with |
English PDF |
| GB/T 22092-2008 |
Fixed micrometer and depth micrometer with electronic digital display 电子数显测微头和深度千分尺 |
China National Standards with |
English PDF |
| GB/T 22091.1-2008 |
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1:Verification of parallel internal and taper external threads 55°密封管螺纹量规 第1部分：用于检验圆柱内螺纹与圆锥外螺纹 |
China National Standards with |
English PDF |
| GB 16917.22-2008 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO) - Part 22:Applicability of the general rules to RCBO functionally dependent of line voltage 家用和类似用途的带过电流保护的剩余 电流动作断路器（RCBO） 第22部分：一般规则对动作功能与电源电压有关的RCBO的适用性 |
China National Standards with |
English PDF |
| GB 16917.21-2008 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO) Part 21：Applicability of the general rules to RCBO functionally independent of line voltage 家用和类似用途的带过电流保护的剩余 电流动作断路器（RCBO） 第21部分：一般规则对动作功能与电源电压无关的RCBO的适用性 |
China National Standards with |
English PDF |
| GB 16916.22-2008 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 22:Applicability of the general rules to RCCB functionally dependent of line voltage 家用和类似用途的不带过电流保护的剩余电流动作断路器（RCCB） 第22部分：一般规则对动作功能与电源电压有关的RCCB的适用性 |
China National Standards with |
English PDF |
| GB 16916.21-2008 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 21:Applicability of the general rules to RCCB functionally independent of line voltage 家用和类似用途的不带过电流保护的剩余电流动作断路器（RCCB） 第21部分：一般规则对动作功能与电源电压无关的RCCB的适用性 |
China National Standards with |
English PDF |
| GB 10068-2008 |
Mechanical vibration of certain machines with shaft heights 56 mm and higher-measurement,evaluation and limits of vibration severity 轴中心高为56 mm及以上电机的机械振动 振动的测量、评定及限值 |
China National Standards with |
English PDF |
| GB/T 22227-2008 |
Chemical products for industrial use - Determination of water solubility of solid and liquids with low solubility - Column elution method 工业用化学品 具有低溶解性的固体和液体水溶性测定 圆柱层析法 |
China National Standards with |
English PDF |
| GB/T 9789-2008 |
Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture 金属和其他无机覆盖层 通常凝露条件下的二氧化硫腐蚀试验 |
China National Standards with |
English PDF |
| GB/T 2496-2008 |
Coupling with flexible ring 弹性环联轴器 |
China National Standards with |
English PDF |
| GB/T 22051-2008 |
Cold-expansion fittings with sliding compression-sleeves for cross-linked polyethylene(PE-X) pipe 交联聚乙烯(PE-X)管用滑紧卡套冷扩式管件 |
China National Standards with |
English PDF |
| GB/T 17506-2008 |
The analysis method of corrosive layer on ferrous metals of ship with EPMA 船舶黑色金属腐蚀层的电子探针分析方法 |
China National Standards with |
English PDF |
| GB/T 17360-2008 |
Quantitative analysis method of low content Si and Mn in steel with electron probe microanalysis 钢中低含量Si、Mn的电子探针定量分析方法 |
China National Standards with |
English PDF |
| GB/T 7095.6-2008 |
Enamelled rectangular copper winding wires - Part 6: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 漆包铜扁绕组线 第6部分：200级聚酯或聚酯亚胺/聚酰胺酰亚胺复合漆包铜扁线 |
China National Standards with |
English PDF |
| GB/T 14818-2008 |
General specification for DC servomotors with wounded disc armature 线绕盘式直流伺服电动机通用技术条件 |
China National Standards with |
English PDF |
| GB/T 12967.2-2008 |
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 2: measurement of wear risistance and wear index of anodic oxidation coatings with an abrasive wheel wear test appaeratus 铝及铝合金阳极氧化膜检测方法 第2部分:用轮式磨损试验仪测定阳极氧化膜的耐磨性和耐磨系数 |
China National Standards with |
English PDF |
| GB/T 12967.1-2008 |
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 1：Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test Apparatus 铝及铝合金阳极氧化膜检测方法 第1部分：用喷磨试验仪测定阳极氧化膜的平均耐磨性 |
China National Standards with |
English PDF |
| GB/T 3506-2008 |
Machine taps with helical flutes 螺旋槽丝锥 |
China National Standards with |
English PDF |
| GB/T 21948.2-2008 |
Test conditions for CNC milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分：立式铣床 |
China National Standards with |
English PDF |
| GB/T 21948.1-2008 |
Test conditions for CNC milling machines with table of variable height - Testing of accuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分：卧式铣床 |
China National Standards with |
English PDF |
| GB/T 16770.2-2008 |
Solid hardmetal end mills with parallel shank - Part 2: Technical specifications 整体硬质合金直柄立铣刀 第2部分：技术条件 |
China National Standards with |
English PDF |
| GB/T 16770.1-2008 |
Solid hardmetal end mills with parallel shank - Part 1: Dimensions 整体硬质合金直柄立铣刀 第1部分：型式与尺寸 |
China National Standards with |
English PDF |
| GB/T 16456.4-2008 |
End mills with brazed helical hardmetal tips - Part 4：Technical specifications 硬质合金螺旋齿立铣刀 第4部分：技术条件 |
China National Standards with |
English PDF |
| GB/T 16456.3-2008 |
End mills with brazed helical hardmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分：莫氏锥柄立铣刀 型式和尺寸 |
China National Standards with |
English PDF |
| GB/T 16456.2-2008 |
End mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分：7:24 锥柄立铣刀 型式和尺寸 |
China National Standards with |
English PDF |
| GB/T 16456.1-2008 |
End mills with brazed helical hardmetal tips - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分：直柄立铣刀 型式和尺寸 |
China National Standards with |
English PDF |
| GB/T 15307-2008 |
Drills with Indexable inserts - Cylindrical shanks with a parallel flat 可转位钻头用削平直柄 |
China National Standards with |
English PDF |
| GB/T 15306.4-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 4：Specifications 陶瓷可转位刀片 第4部分：技术条件 |
China National Standards with |
English PDF |
| GB/T 15306.3-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U) 陶瓷可转位刀片 第3部分：无孔刀片尺寸（U级） |
China National Standards with |
English PDF |
| GB/T 15306.2-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 2: Dimensions of inserts with cylindrical fixing hole 陶瓷可转位刀片 第2部分：带孔刀片尺寸 |
China National Standards with |
English PDF |
| GB/T 15306.1-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1: Dimensions of inserts without fixing hole(Class G) 陶瓷可转位刀片 第1部分：无孔刀片尺寸（G级） |
China National Standards with |
English PDF |
| GB/T 14321-2008 |
Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer 刚玉磨料中α-Al2O3相X射线定量测定方法 |
China National Standards with |
English PDF |
| GB/T 14298-2008 |
Helical end mills with indexable inserts 可转位螺旋立铣刀 |
China National Standards with |
English PDF |
| GB/T 5989-2008 |
Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature 耐火材料 荷重软化温度试验方法 示差升温法 |
China National Standards with |
English PDF |
| GB 5959.13-2008 |
Safety in electroheat installations - Part 13: particular requirements for electroheat installation with explosive atmosphere 电热装置的安全 第13部分: 对具有爆炸性气氛的电热装置的特殊要求 |
China National Standards with |
English PDF |
| GB/T 12722-2008 |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test（half-omega test） 橡胶和塑料软管组合件 液压脉冲曲挠试验（半Ω试验） |
China National Standards with |
English PDF |
| GB/T 7732-2008 |
Metallic materials - Fracture toughness testing method with surface crack tension specimens 金属材料 表面裂纹拉伸试样断裂韧度试验方法 |
China National Standards with |
English PDF |
| GB/T 13793-2008 |
Steel pipes with a longitudinal electric (resistance) weld 直缝电焊钢管 |
China National Standards with |
English PDF |
| GB/T 21771-2008 |
Chemicals - Test method of combined repeated dose toxicity study with the reproduction/developmental toxicity screening 化学品 重复剂量毒性合并生殖/发育毒性筛选试验方法 |
China National Standards with |
English PDF |
| GB/T 21768-2008 |
Chemical - Test method of DNA damage and repair/unscheduled DNA synthesis with mammalian cells in vitro 化学品 体外哺乳动物细胞DNA损伤与修复/非程序性DNA合成试验方法 |
China National Standards with |
English PDF |
| GB/T 21767-2008 |
Chemical - Test method of unscheduled DNA synthesis (UDS) test with mammalian liver cells In Vivo 化学品 体内哺乳动物肝细胞非程序性DNA合成(UDS)试验方法 |
China National Standards with |
English PDF |
| GB/T 3760-2008 |
24° cone connectors - Plug with O-ring 卡套式管接头用锥密封堵头 |
China National Standards with |
English PDF |
| GB/T 3756-2008 |
24° cone connectors - Swivel stud straight adapter with O-ring with stud end 卡套式锥密封组合直通管接头 |
China National Standards with |
English PDF |
| GB/T 3755-2008 |
24° cone connectors - Branch tee with O-ring 卡套式锥密封组合三通管接头 |
China National Standards with |
English PDF |
| GB/T 3754-2008 |
24° cone connectors - Swivel elbow with O-ring 卡套式锥密封组合弯通管接头 |
China National Standards with |
English PDF |
| GB/T 27023-2008 |
Methods of indicating conformity with standards for third-party certification systems 第三方认证制度中标准符合性的表示方法 |
China National Standards with |
English PDF |
| GB/T 3921-2008 |
Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda 纺织品 色牢度试验 耐皂洗色牢度 |
China National Standards with |
English PDF |
| GB 21668-2008 |
Provisions of vehicles for the carriage of dangerous goods with regard to their specific constructional features 危险货物运输车辆结构要求 |
China National Standards with |
English PDF |
| GB/T 16935.1-2008 |
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests 低压系统内设备的绝缘配合 第1部分：原理、要求和试验 |
China National Standards with |
English PDF |
| GB/T 6109.9-2008 |
Enamelled round winding wire - Part 9:Solderable polyurethane enamelled round copper wire overcoated with polyamide,class 130 漆包圆绕组线 第9部分：130级聚酰胺复合直焊聚氨酯漆包铜圆线 |
China National Standards with |
English PDF |
| GB/T 6109.20-2008 |
Enamelled round winding wire - Part 20: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire,class 200 漆包圆绕组线 第20部分：200级聚酰胺酰亚胺复合聚酯或聚酯亚胺漆包铜圆线 |
China National Standards with |
English PDF |
| GB/T 6109.19-2008 |
Enamelled round winding wire - Part 19: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire,class 200,with a bonding layer 漆包圆绕组线 第19部分：200级自粘性聚酰胺酰亚胺复合聚酯或聚酯亚胺漆包铜圆线 |
China National Standards with |
English PDF |
| GB/T 6109.18-2008 |
Enamelled round winding wire - Part 18: Polyesterimide enamelled round copper wire,class 180,with a bonding layer 漆包圆绕组线 第18部分：180级自粘性聚酯亚胺漆包铜圆线 |
China National Standards with |
English PDF |
| GB/T 6109.17-2008 |
Enamelled round winding wire - Part 17: Solderable polyesterimide enamelled round copper wire,class 180,with a bonding layer 漆包圆绕组线 第17部分：180级自粘性直焊聚酯亚胺漆包铜圆线 |
China National Standards with |
English PDF |
| GB/T 6109.16-2008 |
Enamelled round winding wire - Part 16: Solderable polyurethane enamelled round copper wire,class 155,with a bonding layer 漆包圆绕组线 第16部分：155级自粘性直焊聚氨酯漆包铜圆线 |
China National Standards with |
English PDF |
| GB/T 6109.15-2008 |
Enamelled round winding wire - Part 15:Solderable polyurethane enamelled round copper wire,class 130,with a bonding layer 漆包圆绕组线 第15部分：130级自粘性直焊聚氨酯漆包铜圆线 |
China National Standards with |
English PDF |
| Find out:1746Items | To Page of: First -Previous-Next -Last | [6] [7] [8] [9] [10] [11] [12] |
+86-755-25831330
