China National Standards		 HOME  CONTACT US to PC vesion

'GB'
China GB Standards List

 GB/T 31.3-1988  
Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B
六角头螺杆带孔螺栓 细牙 A和B级
 GB/T 31.2-1988  
Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
六角头螺杆带孔螺栓 细杆 B级
 GB/T 56-1988  
Hexagon thick nuts
六角厚螺母
 GB/T 32.3-1988  
Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B
六角头头部带孔螺栓 细牙 A和B级
 GB/T 838-1988  
Hexagon screws with waisted shank
六角头不脱出螺钉
 GB/T 949-1988  
Slotted raised countersunk head screws with waisted shank
开槽半沉头不脱出螺钉
 GB/T 948-1988  
Slotted countersunk head screws with waisted shank
开槽沉头不脱出螺钉
 GB/T 947-1988  
Slotted large raised cheese head screws
开槽球面大圆柱头螺钉
 GB/T 946-1988  
Slotted raised cheese head screws with shoulder
开槽球面圆柱头轴位螺钉
 GB/T 9459-1988  
Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B
六角开槽薄螺母 细牙 A和B级
 GB/T 9458-1988  
Hexagon slotted and castle nuts，style 2--Fine pitch thread--Product grades A and B
2 型六角开槽螺母 细牙 A和B级
 GB/T 9457-1988  
Hexagon slotted and castle nuts，style l--Fine pitch thread--Product grades A and B
1 型六角开槽螺母 细牙 A和B级
 GB/T 9456-1988  
Cross recessed hexagon head tapping screws withindentation
十字槽凹穴六角自攻螺钉
 GB/T 86-1988  
Square set screws with short dog point and coneend
方头短圆柱锥端紧定螺钉
 GB/T 85-1988  
Square set screws with long dog point
方头长圆柱端紧定螺钉
 GB/T 84-1988  
Square set screws with cup point
方头凹端紧定螺钉
 GB/T 8-1988  
Square head bolts--Product grade C
方头螺栓 C级
 GB/T 839-1988  
Knurled thumb screws with waisted shank
滚花头不脱出螺钉
 GB/T 83-1988  
Square set screws with long dog point and rounded end
方头长圆柱球面端紧定螺钉
 GB/T 816-1988  
Round nuts with set pin holes in side
侧面带孔圆螺母
 GB/T 817-1988  
Slotted round nuts
带槽圆螺母
 GB/T 821-1988  
Square set screws with chamfered end
方头倒角端紧定螺钉
 GB/T 829-1988  
Slotted set screws with dog point
开槽圆柱端定位螺钉
 GB/T 840-1988  
Plastic diamond knurlhead screws
塑料滚花头螺钉
 GB/T 831-1988  
Slotted shoulder screws
开槽无头轴位螺钉
 GB/T 812-1988  
Round nuts
圆螺母
 GB/T 832-1988  
Slotted cap stan screws
开槽带孔球面圆柱头螺钉
 GB/T 833-1988  
Slotted large cheese head screws
开槽大圆柱头螺钉
 GB/T 834-1988  
Knurled thumb screws
滚花高头螺钉
 GB/T 835-1988  
Knurled screws
滚花平头螺钉
 GB/T 836-1988  
Knurled screws with small head
滚花小头螺钉
 GB/T 837-1988  
Slotted pan head screws with waisted shank
开槽盘头不脱出螺钉
 GB/T 830-1988  
Slotted cheese head screws with shoulder
开槽圆柱头轴位螺钉
 GB/T 9411-1988  
Performance requirements for airborne marker beacon receiver
机载指点信标接收机性能要求
 GB/T 9430-1988  
Methods of test of luminance stability for fluorescent display tubes
荧光数码显示管亮度稳定性试验方法
 GB/T 9409-1988  
Specifications for colour TV demodulation equipment (1 TV+1 sound program) used in long-haul terres-trial analog radio-relay systems
长距离地面模拟微波接力系统 彩色电视解调机 (一路电视一路伴音) 技术条件
 GB/T 9413-1988  
Methods of measurement of modems for wide band using 60～108 kHz group band circuits
用于60～108 kHz基群电路的宽带调制解调器的测量方法
 GB/T 9408-1988  
Specifications for colour TV modulation equipment (1 TV+1 sound program) used in long-haul terres-trial analog radio-relay systems
长距离地面模拟微波接力系统 彩色电视调制机 (一路电视一路伴音) 技术条件
 GB/T 9425-1988  
Blank detail specification for semiconductor inte-grated circuit operational amplifiers
半导体集成电路运算放大器空白详细规范 (可供认证用)
 GB/T 9432-1988  
Blank detail specification for industrial heating tetrode
工业加热用四极管空白详细规范 (可供认证用)
 GB/T 9433-1988  
General specification of gas discharge tubes for overvoltage protection
过电压保护气体放电管总规范 (可供认证用)
 GB/T 9434-1988  
Methods of measurement of gas discharge tubes for overvoltage protection
过电压保护气体放电管测试方法
 GB/T 9412-1988  
Modems for date transmission at 48 kilobits per second using 60～108 kHz group band circuits
用于60～108 kHz基群电路的48 kbit/s数据传输的调制解调器
 GB/T 9391-1988  
Shipborne radar，technical and operation requirements--Method of testing and required test results
船用雷达技术要求和使用要求 测试方法和要求的测试结果
 GB/T 9390-1988  
Terminology for navigation
导航术语
 GB/T 9389-1988  
Sound transmission using infrared radiation
用红外辐射的声传输
 GB/T 9388-1988  
Methods of measurement for wireless microphonesystems
无线传声器系统测量方法
 GB/T 9367-1988  
General specification of flyback transformers for color broadcasting TV receivers
彩色广播电视接收机用回扫变压器总技术条件
 GB 9378-1988  
Safety requirements for video-audio and pulse equipment of broadcasting television studio system
广播电视演播系统的视音频和脉冲设备安全要求
 GB/T 9363-1988  
Information processing--9-Track， 12.7mm (0.5in) wide magnetictape for information interchange--Format and recording，using group coding at 246 cpmm(6250 cpi)
信息处理 信息交换用9磁道12.7mm(0.5in)磁带成组编码方式246 cpmm (6250 cpi) 的格式及记录

Find out:54176Items   |   First -Previous-Next -Last  | [1059] [1060] [1061] [1062] [1063] [1064] [1065]

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        sales@gbstandards.org 
© Copyright  2001-2021 All Rights Reserved