China National Standards		 HOME  CONTACT US to PC vesion

'GB'
China GB Standards List

 GB/T 25720-2010  
Pneumatic forging hammer - Type and parameter
空气锤 型式与基本参数
 GB/T 25721-2010  
Pneumatic forging hammer - Technical requirements
空气锤 技术条件
 GB/T 25937-2010  
Radial ply tyre single stage building machine
子午线轮胎一次法成型机
 GB/T 25938-2010  
Automatic weighing system for small chemicals in rubber mixing process
炼胶工序中小料自动配料称量系统
 GB/T 14263-2010  
Methods for sampling and sample preparation of flotation copper concentrates in bulk
散装浮选铜精矿取样、制样方法
 GB/T 25940-2010  
IRHD dead-load testers
定负荷国际橡胶硬度计
 GB/T 14262-2010  
Methods for sampling and sample preparation of flotation lead concentrates in bulk
散装浮选铅精矿取样、制样方法
 GB/T 25794-2010  
Reactive golden yellow KN-RNL（C.I. Reactive orange 107）and Reactive red M-RB（C.I. Reactive red 198）
反应金黄KN-RNL（C.I.反应橙107）及反应红M-RB（C.I.反应红198）
 GB/T 6080.2-2010  
Machine hacksaw blades - Part 2: Technical specifications
机用锯条 第2部分：技术条件
 GB/T 25751-2010  
Compression gas spring technical specification
压缩气弹簧技术条件
 GB/T 6335.2-2010  
Rotary and rotary impact masonry drill bits with hardmetal tips Part 2: Technical specifications
旋转和旋转冲击式硬质合金建工钻 第2部分：技术条件
 GB/T 11263-2010  
Hot-rolled H and cut T section steel
热轧H型钢和剖分T型钢
 GB/T 14260-2010  
General rules for sampling and sample preparation of heavy nonferrous metals flotation concentrates in bulk
散装重有色金属浮选精矿取样、制样通则
 GB/T 6335.1-2010  
Rotary and rotary impact masonry drill bits with hardmetal tips Part1: Dimensions
旋转和旋转冲击式硬质合金建工钻 第1部分：尺寸
 GB/T 25939-2010  
Up-stream equipment system for rubber internal mixer
密闭式炼胶机上辅机系统
 GB/T 10661-2010  
Fluorescent whitening agent VBL（C.I. Fluorescent whitening agent 85）
荧光增白剂VBL（C.I.荧光增白剂85）
 GB/T 25952-2010  
Methods for sampling and sample preperation of flotation nickel conentrates in bulk
散装浮选镍精矿取样、制样方法
 GB/T 25953-2010  
Nonferrous metals mineral processing and iron concentrate recovering
有色金属选矿回收铁精矿
 GB/T 25954-2010  
Scraps of cobalt and cobalt alloy
钴及钴合金废料
 GB/T 25955-2010  
Scraps of tantalum and tantalum alloy
钽及钽合金废料
 GB/T 5313-2010  
Steel plates with through-thickness characteristics
厚度方向性能钢板
 GB 14923-2010  
Laboratory animal - Genetic quality control of mammalian laboratory animals
实验动物 哺乳类实验动物的遗传质量控制
 GB/T 25951.3-2010  
Nickel and nickel alloys - Terms and definitions - Part 3: Wrought products and castings
镍及镍合金 术语和定义 第3部分：加工产品和铸件
 GB 14925-2010  
Laboratory animal - Requirements of environment and housing facilities
实验动物 环境及设施
 GB/T 16709.1-2010  
Vacuum technology - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type
真空技术 管路配件的装配尺寸 第1部分：非刀口法兰型
 GB/T 16709.2-2010  
Vacuum technology- Mounting dimensions of pipeline fittings Part 2: Knife-edge flange type
真空技术 管路配件的装配尺寸 第2部分：刀口法兰型
 GB/T 25749.2-2010  
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
机械安全 空气传播的有害物质排放的评估 第2部分：测量给定污染物排放率的示踪气体法
 GB/T 25749.3-2010  
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
机械安全 空气传播的有害物质排放的评估 第3部分：测量给定污染物排放率的试验台法
 GB/T 25749.4-2010  
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system
机械安全 空气传播的有害物质排放的评估 第4部分：测量排气系统捕获效率的示踪法
 GB/T 25750-2010  
Lockable gas spring technical specification
可锁定气弹簧技术条件
 GB/T 25833-2010  
The galvanized steel wire ropes for highway guardrail
公路护栏用镀锌钢丝绳
 GB/T 6080.1-2010  
Machine hacksaw blades - Part 1: Types and dimensions
机用锯条 第1部分：型式和尺寸
 GB 14924.3-2010  
Laboratory animals - Nutrients for formula feeds
实验动物 配合饲料营养成分
 GB/T 25934.2-2010  
Methods for chemical analysis of high purity gold - Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method - Determination of impurity elements contents
高纯金化学分析方法 第2部分：ICP-MS-标准加入校正-内标法 测定杂质元素的含量
 GB/T 25834-2010  
Corrosion of metals and alloys - Accelerate corrosion testing of iron and steel in outdoor atmospheres
金属和合金的腐蚀 钢铁户外大气加速腐蚀试验
 GB/T 25835-2010  
Epoxy-coated steel wires for cables
缆索用环氧涂层钢丝
 GB/T 25749.1-2010  
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
机械安全 空气传播的有害物质排放的评估 第1部分：试验方法的选择
 GB/T 25951.2-2010  
Nickel and nickel alloys - Terms and definitions - Part 2: Refinery products
镍及镍合金 术语和定义 第2部分：精炼产品
 GB/T 25932-2010  
General specification of superalloy master alloys for castings
铸造高温合金母合金通用技术条件
 GB/T 25934.1-2010  
Methods for chemical analysis of high purity gold - Part 1: Ethyl acetate extraction separation - Inductively coupled plasma - atomic emission spectrometry - Determination of impurity elements contents
高纯金化学分析方法 第1部分：乙酸乙脂萃取分离ICP-AES法 测定杂质元素的含量
 GB/T 25934.3-2010  
Methods for chemical analysis of high - purity gold - Part 3: Ethylether extraction separation - Inductively coupled plasma-atomic emission spectrometry - Determinaion of impurity elements contents
高纯金化学分析方法 第3部分：乙醚萃取分离ICP-AES法 测定杂质元素的含量
 GB/T 25942-2010  
Nuclear grade silver-indium-cadmium rods
核级银-铟-镉合金棒
 GB/T 25948-2010  
Aluminium ores - Determination of total iron content - Titanium trichloride reduction method
铝土矿 铁总量的测定 三氯化钛还原法
 GB/T 25944-2010  
Aluminium ores - Experimental determination of the heterogeneity of distribution of a lot
铝土矿 批中不均匀性的实验测定
 GB/T 25945-2010  
Aluminium ores - Sampling procedures
铝土矿 取样程序
 GB/T 25946-2010  
Aluminium ores - Experimental methods for checking the bias of sampling
铝土矿 取样偏差的检验方法
 GB/T 25947-2010  
Aluminium ores - Determination of the moisture content of bulk material
铝土矿 散装料水分含量的测定
 GB/T 25951.1-2010  
Nickel and nickel alloys - Terms and definitions - Part 1: Materials
镍及镍合金 术语和定义 第1部分：材料
 GB/T 25943-2010  
Aluminium ores - Experimental methods for checking the precision of sampling
铝土矿 检验取样精度的实验方法
 GB/T 25933-2010  
High-purity gold
高纯金

Find out:54176Items   |   First -Previous-Next -Last  | [617] [618] [619] [620] [621] [622] [623]

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        sales@gbstandards.org 
© Copyright  2001-2021 All Rights Reserved