China National Standards		 HOME  CONTACT US to PC vesion

'M'
China GB Standards List

 GB/T 24218.1-2009  
Textiles - Test Methods for nonwovens - Part 1: Determination of mass per unit area
纺织品 非织造布试验方法 第1部分：单位面积质量的测定
 GB/T 2912.3-2009  
Textiles - DeterMination of formaldehyde - Part 3: High performance liquid chromatography method
纺织品 甲醛的测定 第3部分：高效液相色谱法
 GB/T 24274-2009  
Low-voltage withdrawable switchgear and controlgear asseMblies
低压抽出式成套开关设备和控制设备
 GB/T 4802.4-2009  
Textiles - DeterMination of fabric propensity to surface fuzzing and to pilling - Part 4: Random rolling method
纺织品 织物起毛起球性能的测定 第4部分：随机翻滚法
 GB/T 3292.2-2009  
Textiles - Unevenness of textile strands - Part 2: Photoelectricity Method
纺织品 纱线条干不匀试验方法 第2部分：光电法
 GB/T 24277-2009  
A Method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
评估部分型式试验成套设备（PTTA）短路耐受强度的一种方法
 GB/T 24268-2009  
Test Methods for chemical analysis of silver-tin oxide electric contact material
银氧化锡电触头材料化学分析方法
 GB/T 24275-2009  
Low-voltage fixed connection enclosed switchgear and controlgear asseMblies
低压固定封闭式成套开关设备和控制设备
 GB/T 24269-2009  
Specification for CuCrFe electric contact Material
铜铬铁电触头技术条件
 GB/T 24273-2009  
Test Method for electrical properties of electrical contact materials
电触头材料电性能试验方法
 GB/T 24272-2009  
Test Method for mechanical torque rate of spiral coils of thermostat metal
热双金属平螺旋形元件机械转矩率试验方法
 GB/T 24271-2009  
Specification for strip coMponent of thermostat metals
热双金属条形元件技术条件
 GB/T 24270-2009  
Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials
永磁材料磁性能温度系数测量方法
 GB 10252-2009  
Regulations for radiation protection and safety of gaMma irradiation facilities
γ辐照装置的辐射防护与安全规范
 GB/T 4743-2009  
Textiles - Yarn froM packages - Determination of linear density(mass per unit length) by the skein methord
纺织品 卷装纱 绞纱法线密度的测定
 YY 0272-2009  
Dentistry. Zinc oxide/eugenol and zinc oxide/non-eugenol ceMents
牙科学 氧化锌/丁香酚水门汀和不含丁香酚的氧化锌水门汀
 YD/T 1899-2009  
Technical RequireMents of Deep Packet Inspection Device
深度包检测设备技术要求
 HJ 472-2009  
Technical requireMent for environmental labeling products. Digital stencil duplicator
环境标志产品技术要求 数字式一体化速印机
 YY/T 0127.13-2009  
Biological evaluation of Medical devices used in dentistry. Part 2: Tset method. Oral mucous membrane irritation test
口腔医疗器械生物学评价 第2单元：试验方法 口腔粘膜刺激试验
 YY 0719.5-2009  
OphthalMic optics. Contact lens care products. Part 5: Determination of physical compatibility of contact lens care products with contact lenses
眼科光学 接触镜护理产品 第5部分：接触镜和接触镜护理产品物力相容性的测定
 YY 0721-2009  
Medical electrical equipment-Safety of radiotherapy record and verify systems
医用电气设备 放射性治疗记录与验证系统的安全
 YY 0731-2009  
Large steaM sterilizers. Manual control type
大型蒸汽灭菌器 手动控制型
 YY 0732-2009  
Oxygen concentrators for Medical use. Safety requirements
医用氧气浓缩器 安全要求
 YY 0719.4-2009  
OphthalMic optics-contact lens care products. Part 4: Antimicrobial preservative efficacy testing and determining discard date
眼科光学 接触镜护理产品 第4部分：抗微生物防腐有效性试验及测定抛弃日期指南
 YY/T 0084.2-2009  
Strength calculation and relevant regulations of priMary pressure containing parts for rectangular pressure steam-heated sterilizer
矩形压力蒸汽灭菌器主要受压元件强度计算及其有关规定
 YY 0715-2009  
Dentistry. AMalgam capsules
牙科学 银汞合金胶囊
 YY/T 0127.14-2009  
Biological evaluation of Medical devices used in dentistry. Part 2: Test method. Acute oral toxicity test
口腔医疗器械生物学评价 第2单元：试验方法 急性经口全身毒性试验
 YY/T 0506.5-2009  
Surgical drapes, gowns and clean air suits for patients, clinical staff and equipMent. Part 5: Test method for resistance to dry microbial penetration
病人、医护人员和器械用手术单、手术衣和洁净服 第5部分：阻干态微生物穿透试验方法
 YY/T 0506.6-2009  
Surigical drapes, gowns and clean air suits, used as Medical devices, for patients, clinical staff and equipment. Part 6: Test method to determine the resistance to wet bacterial penetration
病人、医护人员和器械用手术单、手术衣和洁净服 第6部分：阻湿态微生物穿透试验方法
 YY/T 0084.1-2009  
Strength calculation and relevant regulations of priMary pressure components of cylindrical pressure steam sterilizer
圆形压力蒸汽灭菌器主要受压元件强度计算及其有关规定
 YY 0719.2-2009  
OphthalMic optics. Contact lens care products. Part 2: Fundamental requirements
眼科光学 接触镜护理产品 第2部分：基本要求
 YY/T 0681.1-2009  
Test Methods for sterile medical device package. Part 1: Test guide for accelerated aging
无菌医疗器械包装试验方法 第1部分：加速老化试验指南
 YY 0716-2009  
Dental-CeraMic
牙科陶瓷
 YY 0710-2009  
Dentistry. PolyMer-based crown and bridge materials
牙科学 聚合物基冠桥材料
 YY 0635.4-2009  
Inhalational anaesthesia systeMs. Part 4: Requirements for anaesthetic ventilators
吸入式麻醉系统 第4部分：麻醉呼吸机
 YY 0635.3-2009  
Inhalational anaesthesia systeMs. Part 3: Anaesthetic vapour delivery devices
吸入式麻醉系统 第3部分：麻醉气体输送装置
 YY 0635.2-2009  
Inhalational anaesthesia systeMs. Part 2: Anaesthetic gas scavenging systems transfer and receiving systems
吸入式麻醉系统 第2部分：麻醉气体净化系统 传递和收集系统
 YY 0465-2009  
Disposable Membrane plasmaseparator
一次性使用空心纤维血浆分离器
 YY 0464-2009  
Disposable heMoperfutor
一次性使用血液灌流器
 YY 0290.2-2009  
OphthalMic implants. Intraocular lenses. Part 2: Optical properties and test methods
眼科光学 人工晶状体 第2部分：光学性能及试验方法
 YY 0055.1-2009  
Dentisitry. Powered polyMerization activators. Part 1: Quartz tungsten halogen lamps
牙科-光固化机 第1部分：石英钨卤素灯
 YY 0719.3-2009  
OphthalMic optics. Contact lens care products. Part 3: Microbiological requirements and test methods for products and regiments for hygienic managements of contact
眼科光学　接触镜护理产品　第3部分：微生物要求和试验方法及接触镜护理系统
 YY 0718-2009  
OpthalMic instruments. Retinoscopes
眼科仪器 检影镜
 YY/T 0127.10-2009  
Biological evaluation of Medical devices used in dentistry. Part 2: Test method. Salmonella typhimurium reverse mutation assay (Ames mutagenicity test)
口腔医疗器械生物学评价 第2单元：试验方法 鼠伤寒沙门氏杆菌回复突变试验（ames试验）
 YY/T 0698.10-2009  
Packaging Materials for terminally sterilized medical devices. Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of sealable pouches, reels and lids. Requirements and test methods
最终灭菌医疗器械包装材料 第10部分：可密封组合袋、卷材和盖材生产用涂胶聚烯烃非织造布材料 要求和试验方法
 YY 0719.1-2009  
OphthalMic optics. Contact lens care products. Part 1: Vocabulary
眼科光学 接触镜护理产品 第1部分：术语
 YY/T 0729.2-2009  
Test Methods for bonding properties of tissue adhesives. Part 2: Strength in T-peel by tension loading
组织粘合剂粘接性能试验方法 第2部分：t-剥离拉伸承载强度
 YY/T 0698.7-2009  
Packaging Materials for terminal sterilized medical devices. Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods
最终灭菌医疗器械包装材料 第7部分：环氧乙烷或辐射灭菌屏障系统生产用可密封涂胶纸 要求和试验方法
 YY/T 0127.2-2009  
Biological evaluation of Medical devices used in dentistry. Part 2: Test method. Acute systemic toxicity:intravenous path
口腔医疗器械生物学评价 第2单元：试验方法 急性全身毒性试验：静脉途径
 YY 0717-2009  
Dental root canal sealing Materials
牙科根管封闭材料

Find out:84545Items   |   First -Previous-Next -Last  | [1047] [1048] [1049] [1050] [1051] [1052] [1053]

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        sales@gbstandards.org 
© Copyright  2001-2021 All Rights Reserved