China National Standards		 HOME  CONTACT US to PC vesion

'M'
China GB Standards List

 TB/T 827-2005  
Tube joints for gauge for locoMotive and rolling stock
机车车辆用表管接头
 TB/T 2368-2005  
Motive power units-Bogies and running gear. Bogie frame structure strength tests
动力转向架构架强度试验方法
 TB/T 832-2005  
Single spherical straight-through joints for locoMotive and rolling stock
机车车辆用单球面直通接头
 TB/T 777-2005  
Connection nut of threaded pipe fittings for locoMotive and rolling stock
机车车辆用螺纹管接头 接头螺母
 TB/T 833-2005  
Double spherical straight-through joints for locoMotive and rolling stock
机车车辆用双球面直通接头
 TB/T 3123.5-2005  
Rescue EquipMent for Railway Accident. Part 5: Hydraulic Uprighting Equipment
铁路行车事故救援设备 第5部分:液压扶正机具
 TB/T 831-2005  
Spherical plug-type branch tee for locoMotive and rolling stock
机车车辆用球面栽入三通
 TB/T 830-2005  
Spherical branch tee for locoMotive and rolling stock
机车车辆用球面三通
 TB/T 829-2005  
Spherical square joints for locoMotive and rolling stock
机车车辆用球面直角接头
 TB/T 828-2005  
Spherical elbow joints for locoMotive and rolling stock
机车车辆用球面弯头
 TB/T 778-2005  
Technical specification of threaded pipe fittings for locoMotive and rolling stock
机车车辆用螺纹管接头 技术条件
 TB/T 776-2005  
Spherical joint of threaded pipe fittings for locoMotive and rolling stock
机车车辆用螺纹管接头 球接头
 TB/T 333-2005  
Threaded pipe fittings for locoMotive and rolling stock
机车车辆用螺纹管接头
 TB/T 315-2005  
Ball valve for locoMotive and rolling stock
机车车辆用球阀
 TB/T 3123.8-2005  
Rescue EquipMent for Railway Accident. Part 8: Assembled Bogie
铁路行车事故救援设备 第8部分:代用台车
 TB/T 3123.7-2005  
Rescue EquipMent for Railway Accident. Part 7: Hydraulic Rescue Devices
铁路行车事故救援设备 第7部分:液压破拆机具
 TB/T 3123.6-2005  
Rescue EquipMent for Railway Accident. Part 6: Rerailer
铁路行车事故救援设备 第6部分:复轨器
 GB 19815-2005  
Safety RequireMents for Centrifuge
离心机 安全要求
 GB 19814-2005  
Safety RequireMents for Separator
分离机 安全要求
 HJ/T 178-2005  
Flue gas circulation fluidized bed desulfurization project technical specification of therMal power plant
火电厂烟气脱硫工程技术规范 烟气循环流化床法
 HJ/T 179-2005  
Flue gas liMestone /limegypsum desulfurization project technical specification of thermal power plant
火电厂烟气脱硫工程技术规范 石灰石/石灰-石膏法
 GB/T 19823-2005  
TherMal spraying procedures for the application of thermally sprayed coating for engineering components
热喷涂 工程零件热喷涂涂层的应用步骤
 GB/T 11378-2005  
Metallic coatings-Measurement of coating thickness-Profilometric method
金属覆盖层 覆盖层厚度测量 轮廓仪法
 GB/T 12600-2005  
Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials
金属覆盖层 塑料上镍+铬电镀层
 GB/T 19822-2005  
Specification for hard anodic oxidation coatings on aluMinium and its alloys
铝及铝合金硬质阳极氧化膜规范
 GB/T 19824-2005  
TherMal spraying-Approval testing of thermal sprayers
热喷涂 热喷涂操作人员考核要求
 GB/T 5270-2005  
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述
 GB/T 6462-2005  
Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
金属和氧化物覆盖层 厚度测量 显微镜法
 GB/T 6463-2005  
Metallic and other inorganic coatings-Review of methods of measurement of thickness
金属和其它无机覆盖层厚度测量方法评述
 GB/T 12612-2005  
General specification for Multifunctional solution of iron and steel surface treatment
多功能钢铁表面处理液通用技术条件
 GB/T 19812.2-2005  
Plastic equipMent for water saving irrigation-Pressure compensating emitter and emitting pipe
塑料节水灌溉器材 压力补偿式滴头及滴灌管
 GB/T 19812.1-2005  
Plastic equipMent for water saving irrigation-drip tape with labyrinth on one side
塑料节水灌溉器材 单翼迷宫式滴灌带
 YD/T 1362-2005  
Testing Methods of supplementary specification 1 to Store Program Control (SPC)
电话交换设备总技术规范(补充件1)的测试方法
 YD/T 1055-2005  
Test Method for access network equipment. Asymmetric digital subscriber line (ADSL)
接入网设备测试方法——不对称数字用户线(adsl)
 YD/T 1157.3-2005  
The requireMents for sending calling party number between network Supplementary Ⅲ
网间主叫号码传送(补充件3)
 YD/T 1358-2005  
Security requireMents of medium-end and low-end router
路由器设备安全技术要求——中低端路由器(基于ipv4)
 YD/T 1361-2005  
Technical requireMents and testing methods for telephone dialer
电话拨号器技术要求和测试方法
 YD/T 1359-2005  
Security requireMents of high-end router
路由器设备安全技术要求——高端路由器(基于ipv4)
 GB 5606.4-2005  
Cigarettes-Technical RequireMents for Sense Evaluation
卷烟 第4部分:感官技术要求
 GB 5606.3-2005  
Cigarettes--Technical RequireMents for Packing,Making,Storage and Transport
卷烟 第3部分:包装、卷制技术要求及贮运
 GB 5606.2-2005  
Cigarettes-Mark
卷烟 第2部分:包装标识
 GB 5606.5-2005  
Cigarettes-Mainstream smoke
卷烟 第5部分:主流烟气
 TB 10002.4-2005  
Code for design on concrete and block Masonry structure of railway bridge and culvert
铁路桥涵混凝土和砌体结构设计规范(附条文说明)
 TB 10002.1-2005  
FundaMental code for design on railway bridge and culvert
铁路桥涵设计基本规范(附条文说明)
 GY 5072-2005  
Construction standards and technical deMand for remote monitoring station of terrestrial broadcast
地面无线广播遥控监测站建设标准及技术要求(附条文说明)
 GB/T 11797-2005  
The graphics syMbols for the scene of road traffic accident
道路交通事故现场图形符号
 GB/T 10752-2005  
Marine steel butt-welding fittings
船用钢管对焊接头
 GB/T 19816.3-2005  
Preparation of steel substrates before application of paints and related products-Test Methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定
 GB/T 19816.4-2005  
Preparation of steel substrates before application of paints and related products-Test Methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定
 GB/T 19816.2-2005  
Preparation of steel substrates before application of paints and related products-Test Methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定

Find out:84545Items   |   First -Previous-Next -Last  | [1336] [1337] [1338] [1339] [1340] [1341] [1342]

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        sales@gbstandards.org 
© Copyright  2001-2021 All Rights Reserved