China National Standards		 HOME  CONTACT US to PC vesion

'M'
China GB Standards List

 YY/T 0987.5-2016  
(Surgical iMplants MRI compatibility - Part 5: Test method for magnetically induced torque)
外科植入物磁共振兼容性 第5部分：磁致扭矩试验方法
 YY 1277-2016  
(SteaM Sterilizer biological safety requirements)
蒸汽灭菌器生物安全性能要求
 YY/T 1276-2016  
(DevelopMent of medical devices dry heat sterilization process, validation and routine control)
医疗器械干热灭菌过程的开发、确认和常规控制要求
 YY 1273-2016  
Roller puMp for auxiliary blood purification
血液净化辅助用滚压泵
 GY/T 298-2016  
(Subjective Evaluation of an audio systeM less damage)
音频系统小损伤主观评价方法
 GY/T 297-2016  
(NGB broadband access systeM HINOC2.0 physical layer and media access control layer specification)
ngb宽带接入系统hinoc2.0物理层和媒体接入控制层技术规范
 CJJ/T 245-2016  
Standard for capacity test of vertical pipe of the doMestic residential drainage system
住宅生活排水系统立管排水能力测试标准
 CJJ/T 243-2016  
Technical specification for odor control of Municipal wastewater treatment plant
城镇污水处理厂臭气处理技术规程
 CJJ/T 214-2016  
(Landfill GeoMembrane Technical specification for detecting leakage breakage)
生活垃圾填埋场防渗土工膜渗漏破损探测技术规程
 JJG 1123-2016  
Electronic InstruMents for Front-end Loader
装载机电子秤检定规程
 JJF 1558-2016  
Calibration Specification of Variable Frequency Electrical Quantities Transducer for Measuring
测量用变频电量变送器校准规范
 JJG 1124-2016  
DynaMic Scales for Portal Slewing(Overhead Type) Crane
门座（桥架）起重机动态电子秤检定规程
 JJG 13-2016  
Analogue Indicating Weighing InstruMents
模拟指示秤检定规程
 JJG 14-2016  
Non-self-indicating Weighing InstruMents
非自行指示秤检定规程
 JJG 2067-2016  
Verification ScheMe of Measuring Instruments for Metallic Rockwell Hardness
金属洛氏硬度计量器具检定系统表
 JJG 2072-2016  
Measuring Instruments for Shock Acceleration
冲击加速度计量器具检定系统表
 JJF 1556-2016  
Calibration Specification for Ultrasound PhantoMs
超声仿组织模体校准规范
 QB/T 4884-2015  
Masterbatch of polypropylene random copolymer(PP-R) piping systems for hot and cold water installation
冷热水用无规共聚聚丙烯（pp-r）管道系统专用色母粒
 GY/T 202.2-2016  
(Radio and TV audio-visual Materials cataloging specifications - Part 2: Audio Information)
广播电视音像资料编目规范 第2部分：音频资料
 GB/T 20041.25-2016  
Conduit systeMs for cable management— Part 25: Particular requirements for conduit fixing devices
电缆管理用导管系统 第25部分：导管固定装置的特殊要求
 GB/T 20140-2016  
Measurement method and evaluation criteria of dynamic characteristic and vibration on stator end windings of cylindrical synchronous generators
隐极同步发电机定子绕组端部动态特性和振动测量方法及评定
 GB/T 20290-2016  
Electric dishwashers for household use—Methods for measuring the performance
家用电动洗碗机 性能测试方法
 GB/T 20341-2016  
Tractors and self-propelled Machinery for agriculture—Operator controls—Actuating forces, displacement, location and method of operation
农业拖拉机和自走式机械 操作者操纵装置 操纵力、操纵方向、操纵位置和方法
 GB/T 20343-2016  
Agricultural tractors and Machinery—Connection of implements via three point linkage—Clearance zone around implement
农业拖拉机和机械 三点悬挂机具的连接装置 机具周围的间隙范围
 GB/T 20448.2-2016  
Self-propelled Machinery for forestry—Laboratory tests and performance requirements for roll-over protective structures—Part 2: Machines having a rotating platform with a cab and boom on the platform
自行式林业机械 滚翻保护结构实验室试验和性能要求 第2部分：回转平台上安装驾驶室和起重臂的机械
 GB/T 20833.1-2016  
Rotating electrical Machines—The stator winding insulation of rotating electrical machines—Part 1: Off-line partial discharge measurements
旋转电机 旋转电机定子绕组绝缘 第1部分：离线局部放电测量
 GB/T 20833.2-2016  
Rotating electrical Machines—The stator winding insulation of rotating electrical machines—Part 2: On-line partial discharge measurements on
旋转电机 旋转电机定子绕组绝缘 第2部分：在线局部放电测量
 GB/T 19436.4-2016  
Electrical safety of Machinery—Electro-sensitive protective equipment—Part 4: Particular requirements for equipment using vision based protective devices (VBPD)
机械电气安全 电敏保护设备 第4部分：使用视觉保护装置（VBPD）设备的特殊要求
 GB/T 22715-2016  
IMpulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
旋转交流电机定子成型线圈耐冲击电压水平
 GB/T 19040-2016  
Agricultural tractors—RequireMents for steering
农业拖拉机 转向要求
 GB/T 2550-2016  
Gas welding equipMent—Rubber hoses for welding, cutting and allied processes
气体焊接设备 焊接、切割和类似作业用橡胶软管
 GB/T 20835-2016  
Guides for Magnetization test of generator stator core
发电机定子铁心磁化试验导则
 GB/T 19355.3-2016  
Zinc coatings—Guidelines and recoMmendations for the protection against corrosion of iron and steel in structures—Part 3: Sherardizing
锌覆盖层 钢铁结构防腐蚀的指南和建议 第3部分：粉末渗锌
 GB/T 25774.2-2016  
Test Methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel
焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验
 GB/T 19355.1-2016  
Zinc coatings—Guidelines and recoMmendations for the protection against corrosion of iron and steel in structures—Part 1: General principles of design and corrosion resistance
锌覆盖层 钢铁结构防腐蚀的指南和建议 第1部分：设计与防腐蚀的基本原则
 GB/T 31052.7-2016  
Lifting appliances—Code of inspection and Maintenance—Part 7: Derrick cranes
起重机械 检查与维护规程 第7部分：桅杆起重机
 GB/T 18802.31-2016  
Low-voltage surge protective devices—Surge protective devices for specific application including d.c.—Part 31: RequireMents and tests for SPDs in photovoltaic applications
低压电涌保护器 特殊应用（含直流）的电涌保护器 第31部分：用于光伏系统的电涌保护器（SPD） 性能要求和试验方法
 GB/T 18802.21-2016  
Low-voltage surge protective devices—Part 21: Surge protective devices connected to telecoMmunications and signaling networks—Performance requirements and testing methods
低压电涌保护器 第21部分：电信和信号网络的电涌保护器（SPD） 性能要求和试验方法
 GB/T 18737.9-2016  
Textile Machinery and accessories—Beams for winding—Part 9: Dyeing beams for textile fabrics fabrics
纺织机械与附件 经轴 第9部分：织物染色用轴
 GB/T 18737.7-2016  
Textile Machinery and accessories—Beams for winding—Part 7：Beams for dyeing slivers, rovings and yarns
纺织机械与附件 经轴 第7部分：条子、粗纱和纱线染色用轴
 GB/T 17948.7-2016  
Rotating electrical Machines—Functional evaluation of insulation systems—General guidelines
旋转电机 绝缘结构功能性评定 总则
 GB/T 17948.5-2016  
Rotating electrical Machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
旋转电机 绝缘结构功能性评定 成型绕组试验规程 热、电综合应力耐久性多因子评定
 GB/T 17948.4-2016  
Rotating electrical Machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Evaluation by electrical endurance
旋转电机 绝缘结构功能性评定 成型绕组试验规程 电压耐久性评定
 GB/T 17885-2016  
ElectroMechanical contactors for household and similar purposes
家用及类似用途机电式接触器
 GB/T 16896.2-2016  
InstruMents and software used for measurement in high-voltage and high-current tests—Part 2: Requirements for software for tests with impulse voltages and currents
高电压和大电流试验测量用仪器和软件 第2部分：对冲击电压和冲击电流试验用软件的要求
 GB/T 16842-2016  
Protection of persons and equipMent by enclosures—Probe for verification
外壳对人和设备的防护 检验用试具
 GB/T 19355.2-2016  
Zinc coatings—Guidelines and recoMmendations for the protection against corrosion of iron and steel in structures—Part 2: Hot dip galvanizing
锌覆盖层 钢铁结构防腐蚀的指南和建议 第2部分：热浸镀锌
 GB/T 32476-2016  
Rubber and plastic hoses and hose asseMblies with internal vapour recovery for measured fuel dispensing system
具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件
 GB/T 16460-2016  
Tool life testing in end Milling
立铣刀寿命试验
 GB/T 32568-2016  
General technical requireMents of reusable boxes
重复使用包装箱通用技术条件

Find out:84545Items   |   First -Previous-Next -Last  | [509] [510] [511] [512] [513] [514] [515]

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        sales@gbstandards.org 
© Copyright  2001-2021 All Rights Reserved