China National Standards

HOME CONTACT US

to PC vesion

GB Standards

CNS Standards

China HS code & Tariff

'GB'
China GB Standards List

GB/T 22838.16-2009
Determination of physical characteristics for cigarettes and filter rods - Part 16: Cigarettes - Determination of loss of tobacco from the ends - Method using a rotating cylindrical cage
卷烟和滤棒物理性能的测定第16部分：卷烟端部掉落烟丝的测定旋转笼法

GB/T 22838.15-2009
Determination of physical characteristics for cigarettes and filter rods - Part 15: Cigarettes - Determination of ventilation - Definitions and measurement principles
卷烟和滤棒物理性能的测定第15部分：卷烟通风的测定定义和测量原理

GB/T 22838.14-2009
Determination of physical characteristics for cigarettes and filter rods - Part 14: Filter rods appearance
卷烟和滤棒物理性能的测定第14部分：滤棒外观

GB/T 22838.13-2009
Determination of physical characteristics for cigarettes and filter rods - Part 13: Filter rods roundness
卷烟和滤棒物理性能的测定第13部分：滤棒圆度

GB/T 22838.12-2009
Determination of physical characteristics for cigarettes and filter rods - Part 12: Cigarettes appearance
卷烟和滤棒物理性能的测定第12部分：卷烟外观

GB/T 22838.1-2009
Determination of physical characteristics for cigarettes and filter rods - Part 1: Cigarettes packing and mark
卷烟和滤棒物理性能的测定第1部分：卷烟包装和标识

GB/T 22838.10-2009
Determination of physical characteristics for cigarettes and filter rods - Part 10: Open seam
卷烟和滤棒物理性能的测定第10部分：爆口

GB/T 17527-2009
Determination of pepper essential oils content
胡椒精油含量的测定

GB/T 22838.2-2009
Determination of physical characteristics for cigarettes and filter rods - Part 2: Length - Photoelectricity method
卷烟和滤棒物理性能的测定第2部分：长度光电法

GB/T 22838.11-2009
Determination of physical characteristics for cigarettes and filter rods - Part 11: Cigarettes extinguish
卷烟和滤棒物理性能的测定第11部分：卷烟熄火

GB/T 22838.4-2009
Determination of physical characteristics for cigarettes and filter rods - Part 4: Cigarettes weight
卷烟和滤棒物理性能的测定第4部分：卷烟质量

GB/T 22838.5-2009
Determination of physical characteristics for cigarettes and filter rods - Part 5: Cigarettes draw resistance and filter rods pressure drop
卷烟和滤棒物理性能的测定第5部分：卷烟吸阻和滤棒压降

GB/T 22838.6-2009
Determination of physical characteristics for cigarettes and filter rods - Part 6: Hardness
卷烟和滤棒物理性能的测定第6部分：硬度

GB/T 22838.7-2009
Determination of physical characteristics for cigarettes and filter rods - Part 7: Cigarettes dust content
卷烟和滤棒物理性能的测定第7部分：卷烟含末率

GB/T 22838.8-2009
Determination of physical characteristics for cigarettes and filter rods - Part 8: Moisture
卷烟和滤棒物理性能的测定第8部分：含水率

GB/T 15033-2009
Green coffee - Olfactory and visual examination and determination of foreign matter and defects
生咖啡嗅觉和肉眼检验以及杂质和缺陷的测定

GB/T 22838.9-2009
Determination of physical characteristics for cigarettes and filter rods - Part 9: Cigarettes loose end
卷烟和滤棒物理性能的测定第9部分：卷烟空头

GB/T 22838.3-2009
Determination of physical characteristics for cigarettes and filter rods - Part 3: Circumference - Laser method
卷烟和滤棒物理性能的测定第3部分：圆周激光法

GB/T 17528-2009
Determination of piperine content - Method using HPLC
胡椒碱含量的测定高效液相色谱法

GB/T 23505-2009
Petroleum drilling and workover rigs
石油钻机和修井机

GB/T 23481-2009
CNC Punching,marking & cutting line for angles
数控角钢加工生产线

GB/T 23482-2009
Open front mechanical power presses - Vocabulary
开式压力机术语

GB/T 16624-2009
Anti-riot gun
防暴枪

GB/T 23480.2-2009
Small hole high speed drilling electro-discharge machines - Part 2: Parameters
电火花小孔高速加工机床第2部分：参数

GB/T 21411.2-2009
Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems
石油天然气工业井下设备人工举升用螺杆泵系统第2部分：地面驱动装置

GB/T 14896.3-2009
Non-traditional machines - Terminology - Part 3: Electrochemical machines
特种加工机床术语第3部分：电解加工机床

GB/T 23506-2009
The natural gas power set for oil pruduction drilling site
石油采油井场燃气动力机组

GB/T 10595-2009
Belt conveyors
带式输送机

GB/T 23480.1-2009
Small hole high speed drilling electro-discharge machines - Part 1: Terminology and testing of accuracy
电火花小孔高速加工机床第1部分：术语和精度检验

GB/T 23479.2-2009
Wind turbine double-fed asynchronous generator - Part 2: Testing methods
风力发电机组双馈异步发电机第2部分：试验方法

GB/T 23479.1-2009
Wind turbine double-fed asynchronous generator - Part 1: Technical specification
风力发电机组双馈异步发电机第1部分：技术条件

GB/T 14896.4-2009
Non-traditional machines - Terminology - Part 4: Ultrasonic machines
特种加工机床术语第4部分：超声加工机床

GB/T 14896.2-2009
Non-traditional machines - Terminology - Part 2: Electro-discharge machines
特种加工机床术语第2部分：电火花加工机床

GB/T 14896.1-2009
Non-traditional machines - Terminology - Part 1: Basic terminology
特种加工机床术语第1部分：基本术语

GB/T 14347-2009
Open front mechanical power presses - Types and basic parameters
开式压力机型式与基本参数

GB/T 10924-2009
Straight sided single or two - Point mechanical power presses - Testing of the accuracy
闭式单、双点压力机精度

GB/T 17386-2009
Sizing and selection of electric submersible pump installations
潜油电泵装置的规格选用

GB/T 23507.3-2009
Criterion for electriacl equipment for oil drilling rig - Part 3: The diesel generating set for electric drilling rig
石油钻机用电气设备规范第3部分：电动钻机用柴油发电机组

GB/T 14896.8-2009
Non-traditional machines - Terminology - Part 8: Electric melting explosion machines
特种加工机床术语第8部分：电熔爆加工机床

GB/T 23566.2-2009
Sliding guide steel-plate punch holders of stamping dies - Part 2: Diagonal-pillar punch holders
冲模滑动导向钢板上模座第2部分：对角导柱上模座

GB/T 23562.1-2009
Steel-plate die holders of stamping dies - Part 1: Rear-pillar die holders
冲模钢板下模座第1部分：后侧导柱下模座

GB/T 9166-2009
Four-column hydraulic press - Testing of the accuracy
四柱液压机精度

GB/T 23566.3-2009
Sliding guide steel-plate punch holders of stamping dies - Part 3: Center-pillar punch holders
冲模滑动导向钢板上模座第3部分：中间导柱上模座

GB/T 23566.1-2009
Sliding guide steel-plate punch holders of stamping dies - Part 1: Rear-pillar punch holders
冲模滑动导向钢板上模座第1部分：后侧导柱上模座

GB/T 23565.4-2009
Sliding guide steel-plate die sets of stamping dies - Part 4: Four-pillar die sets
冲模滑动导向钢板模架第4部分：四导柱模架

GB/T 23565.3-2009
Sliding guide steel-plate die sets of stamping dies - Part 3: Center-pillar die sets
冲模滑动导向钢板模架第3部分：中间导柱模架

GB/T 23565.2-2009
Sliding guide steel-plate die sets of stamping dies - Part 2: Diagonal-pillar die sets
冲模滑动导向钢板模架第2部分：对角导柱模架

GB/T 23565.1-2009
Sliding guide steel-plate die sets of stamping dies - Part 1: Rear-pillar die sets
冲模滑动导向钢板模架第1部分：后侧导柱模架

GB/T 23564.4-2009
Ball-bearing guide steel-plate punch holders of stamping dies - Part 4: Four-pillar punch holders
冲模滚动导向钢板上模座第4部分：四导柱上模座

GB/T 23562.4-2009
Steel-plate die holders of stamping dies - Part 4: Four-pillar die holders
冲模钢板下模座第4部分：四导柱下模座

Find out:54176Items | First -Previous-Next -Last | [700] [701] [702] [703] [704] [705] [706]


www.rjs.cn	transcustoms.com	gbstandards.org

- Since 2001 -

+86-755-25831330 sales@gbstandards.org
© Copyright 2001-2021 All Rights Reserved