China National Standards		 HOME  CONTACT US to PC vesion

'reactor'
China GB Standards List

 NB/T 20007.38-2015  
Stainless steel for pressurized water reactor nuclear power plants - Part 38: Austenitic stainless steel bars used for locking screw of CRDM
压水堆核电厂用不锈钢 第38部分：控制棒驱动机构锁紧螺钉用奥氏体不锈钢棒
 NB/T 20007.37-2015  
Stainless steel for pressurized water reactor nuclear power plants - Part 37: Austenitic stainless steel bars used for non-pressure-retaining components of CRDM
压水堆核电厂用不锈钢 第37部分：控制棒驱动机构非承压部件用奥氏体不锈钢棒
 NB/T 20007.36-2015  
Stainless steel for pressurized water reactor nuclear power plant - Part 36: Austenitic stainless steel forged bars used for pressure-retaining components of CRDM
压水堆核电厂用不锈钢 第36部分：控制棒驱动机构承压部件用奥氏体不锈钢锻棒
 NB/T 20327.1-2015  
Special doors of pressurized water reactor nuclear power plant - Part 1: Design
压水堆核电厂特种门 第1部分：设计
 GB 19212.21-2014  
Safety of transformers, reactors, power supply units and combinations thereof―Part 21: Particular requirements and tests for small reactors
变压器、电抗器、电源装置及其组合的安全 第21部分：小型电抗器的特殊要求和试验
 GB 19212.10-2014  
Safety of transformers,reactors, power supply units and combinations thereof―Part 10: Particular requirements and tests for transformers and power supply units for class Ⅲ handlamps for tungsten filament lamps
变压器、电抗器、电源装置及其组合的安全 第10部分:Ⅲ类手提钨丝灯用变压器和电源装置的特殊要求和试验
 NB/T 20009.26-2014  
Welding material for pressurized water reactor nuclear power plants. Part 26: Carbon steel electrodes for gas shielded an wedding for safety-related compoaenb
压水堆核电厂用焊接材料 第26部分：安全级设备用碳钢气体保护电弧焊焊丝
 NB/T 20009.35-2014  
Welding material for pressurized water reactor nuclear power plants. Part35: Low alloy steel covered electrodes for containment vessel
压水堆核电厂用焊接材料 第35部分：钢制安全壳用低合金钢焊条
 NB/T 20319-2014  
Criterion for technical specification for pressurized water reactor nuclear power plant
压水堆核电厂技术规格书编制准则
 NB/T 20312-2014  
Code on the in-service Inspections of mechanical components of pressurized water reactor nuclear islands
压水堆核电厂核岛机械设备在役检查规则
 NB/T 20009.29-2014  
Welding material for pressurized water reactor nuclear power plants. Part 29: Carbon steel wire and fluxes for submerged are welding of safety-related components
压水堆核电厂用焊接材料 第29部分：安全级设备埋弧焊用碳钢焊丝和焊剂
 DL/T 1376-2014  
Technical specification for multistage controlled shunt reactor of extra high voltage
超高压分级式可控并联电抗器技术规范
 NB/T 20009.21-2014  
Welding material for pressurized water reactor nuclear power plants Part 21: Carbon steel covered electrodes for safety-related components
压水堆核电厂用焊接材料 第21部分：安全级设备用碳钢手工电弧焊焊条
 NB/T 20315-2014  
Design and fabrication specification for steam generator of pressurized water reactor nuclear power plants
压水堆核电厂蒸汽发生器设计制造规范
 NB/T 20007.29-2014  
Stainless steel for pressurized water reactor nuclear power plants. Part 29: non-pressure-retaining category A, B and C austenltic-ferritic duplex stainless steel castings for pumps
压水堆核电厂用不锈钢 第29部分：泵用奥氏体-铁素体双相不锈钢a、b、c类非承压铸件
 NB/T 20007.28-2014  
Stainless steel for pressurized water reactor nuclear power plants. Part 28: Class 3 pressure-retaining austenitic-ferritic (duplex) stainless steel castings for seawater application
压水堆核电厂用不锈钢 第28部分：3级耐海水腐蚀奥氏体-铁素体双相不锈钢承压铸件
 NB/T 20005.17-2014  
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 17: Pushed formed elbows for use in main steam systems
压水堆核电厂用碳钢和低合金钢 第17部分：主蒸汽系统用推制弯头
 DL/T 1389-2014  
The guide for choice neutral-earthing reactor of 500kV transformer
500kv变压器中性点接地电抗器选用导则
 NB/T 20009.25-2014  
Welding material for pressurized water reactor nuclear power plants. Part 25: Carbon steel electrodes for flux cored arc welding for safety-related components
压水堆核电厂用焊接材料 第25部分：安全级设备用碳钢气体保护电弧焊药芯焊丝
 QB/T 4678-2014  
reactors for household and similar refrigerating appliances
家用和类似用途制冷器具用电抗器
 NB/T 20304-2014  
Technical guideline for installation of reactor protection system of pressured water reactor nuclear power plants
压水堆核电厂反应堆保护系统安装技术规程
 NB/T 20269-2014  
Design and fabrication specification for reactor coolant pump of pressurized water ractor nuclear power plant
压水堆核电厂反应堆冷却剂泵设计制造规范
 NB/T 20275-2014  
Stud welding specification for pressurized water reactor nuclear power plants
压水堆核电厂螺柱焊接规范
 NB/T 20276-2014  
Design criteria for component cooling water system of passive pressurized water reactor nuclear power plants
非能动压水堆核电厂设备冷却水系统设计准则
 NB/T 20278-2014  
Design criteria for emergency feedwater system of pressurized water reactor nuclear power plants
压水堆核电厂应急给水系统设计准则
 NB/T 20285-2014  
General requirements of reactor system design for pressurized water reactor nuclear power plants
压水堆核电厂反应堆系统设计总要求
 NB/T 20260-2014  
Design criteria for residual heat removal system of pressurized water reactor nuclear power plants
压水堆核电厂余热排出系统设计准则
 NB/T 20262-2014  
Design criteria for steam generator blowdown system of pressurized water reactor nuclear power plants
压水堆核电厂蒸汽发生器排污系统设计准则
 NB/T 42032.2-2014  
Nuclear power reactor coolant pump motor specification. Part 2: Asynchronous motor for canned motor pump
核电主泵电机技术条件 第2部分:屏蔽泵异步电机
 NB/T 20308-2014  
Design code for nuclear safety related plants foundation for pressure water reactor nuclear power plants
压水堆核电厂核安全有关厂房地基基础设计规范
 NB/T 20309-2014  
General design requirements of pressurized water reactor nuclear power plants with active safety systems
能动安全系统压水堆核电厂总设计要求
 NB/T 20310-2014  
Design requirements for structures of ultimate heat sink for pressurized water reactor nuclear power plants
压水堆核电厂最终热阱构筑物设计要求
 NB/T 20311-2014  
Design criteria for containment spray system of pressurized water reactor nuclear power plants
压水堆核电厂安全壳喷淋系统设计准则
 NB/T 42032.1-2014  
Nuclear power reactor coolant pump motor specification. Part 1: Asynchronous motor for shaft sealing pump
核电主泵电机技术条件 第1部分:轴封泵异步电机
 NB/T 20303-2014  
Design requirements for prestressed concrete containments for pressure water reactor nuclear power plants
压水堆核电厂预应力混凝土安全壳设计规范
 NB/T 20295-2014  
Ageing management guideline for pressure tubes of pressurized heavy water reactor nuclear power plants
重水堆核电厂压力管老化管理指南
 NB/T 20261-2014  
Design criteria for emergency core cooling system of pressurized water reactor nuclear power plants
压水堆核电厂应急堆芯冷却系统设计准则
 NB/T 25033-2014  
Guidelines for screening flow accelerated corrosion sensitive pipe of conventional island for pressurized water reactor nuclear plant
压水堆核电厂常规岛流体加速腐蚀敏感管线筛选导则
 GB 19212.17-2013  
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100V—Part 17: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
电源电压为1 100V及以下的变压器、电抗器、电源装置和类似产品的安全 第17部分：开关型电源装置和开关型电源装置用变压器的特殊要求和试验
 GB 19212.6-2013  
Safety of transformers, reactors, power supply units and combinations thereof―Part 6: Particular requirements and test for transformer for shavers, power supply units for shavers snd shaver supply units
变压器、电抗器、电源装置及其组合的安全 第6部分：剃须刀用变压器、剃须刀用电源装置及剃须刀供电装置的特殊要求和试验
 DL/T 1284-2013  
Application guide of 500kV dry-type air-core current-limiting reactor
500kV 干式空心限流电抗器使用导则
 NB/T 42019-2013  
Specification and technical requirements for 750kV and 1000kV oil-immersed shunt reactors
750kV和1000kV级油浸式并联电抗器技
 GB/T 3859.3-2013  
Semiconductor converters - General requirements and line commutated converters - Part 1-3: Transformers and reactors
半导体变流器 通用要求和电网换相变流器 第1-3部分：变压器和电抗器
 GB/T 21419-2013  
Safety of transformers,reactors,power supply units and combinations thereof-EMC requirements
变压器、电抗器、电源装置及其组合的安全 电磁兼容(EMC)要求
 NB/T 20254-2013  
Criteria for nuclear power plant reactor coolant system leakage detection
核电厂反应堆冷却剂系统泄漏探测准则
 NB/T 20007.10-2013  
Stainless steel for pressurized water reactor power plant. Part 10: Cold rolled or cold drawn seamless austenitic stainless steel tubes for class 2 and 3 heat exchangers
压水堆核电厂用不锈钢 第10部分：2、3级热交换器传热管用冷轧、冷拔奥氏体不锈钢无缝钢管
 NB/T 20240-2013  
Reload startup physics tests for pressurized water reactors of nuclear power plant
压水堆核电厂重新装料后的物理启动试验
 NB/T 20007.27-2013  
Stainless steel for pressurized water reactor nuclear power plants. Part 27: Cast Elbows and inclined nozzles made from Austenitic-ferritic stainless steel for reactor coolant piping
压水堆核电厂用不锈钢 第27部分：反应堆冷却剂管道用奥氏体-铁素体不锈钢铸造弯头和斜接管嘴
 NB/T 20007.25-2013  
Stainless steel for pressurized water reactor nuclear power plant. Part25: Chromium nickel austenitic-ferritic stainless steel containing no molybdenum for no-pressure-retaining cast internal pump parts of category A, B and C
压水堆核电厂用不锈钢 第25部分：泵用不含钼的铬镍奥氏体-铁素体不锈钢A、B、C类非承压铸造内件
 NB/T 20007.24-2013  
Stainless steel for pressurized water reactor nuclear power plants. Part 24: austenitic-ferritic stainless steel castings pressured for reactor coolant pump casing
压水堆核电厂用不锈钢 第24部分：反应堆冷却剂泵蜗壳用奥氏体-铁素体不锈钢承压铸件

Find out:441Items   |   First -Previous-Next -Last  | 1 2 3 4 5 6 7 8 9

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        sales@gbstandards.org 
© Copyright  2001-2021 All Rights Reserved