China GB Standards list issued in 2015 year |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 9706.16-2015 |
Medical electrical equipment—Part 2: Particular requirements for the safety of radiotherapy simulators 医用电气设备 第2部分:放射治疗模拟机安全专用要求 |
China National Standards 2015 |
English PDF |
GB 16174.2-2015 |
Implants for surgery—Active implantable medical devices—Part 2: Cardiac pacemakers 手术植入物 有源植入式医疗器械 第2部分:心脏起搏器 |
China National Standards 2015 |
English PDF |
GB 16174.1-2015 |
Implants for surgery—Active implantable medical devices—Part 1: General requirements for safety, marking and for information to be provided by the manufacturer 手术植入物 有源植入式医疗器械 第1部分:安全、标记和制造商所提供信息的通用要求 |
China National Standards 2015 |
English PDF |
GB/T 16886.6-2015 |
Biological evaluation of medical devices—Part 6: Tests for local effects after implantation 医疗器械生物学评价 第6部分:植入后局部反应试验 |
China National Standards 2015 |
English PDF |
GB/T 70.4-2015 |
Hexagon socket button head screws with collar 内六角平圆头凸缘螺钉 |
China National Standards 2015 |
English PDF |
GB/T 70.2-2015 |
Hexagon socket button head screws 内六角平圆头螺钉 |
China National Standards 2015 |
English PDF |
GB/T 5276-2015 |
Fasteners—Bolts, screws, studs and nuts—Symbols and descriptions of dimensions 紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注 |
China National Standards 2015 |
English PDF |
GB/T 5069-2015 |
Chemical analysis of magnesia-alumina refractories 镁铝系耐火材料化学分析方法 |
China National Standards 2015 |
English PDF |
GB/T 32287-2015 |
Methods of determination and calculation of heat balance for hot blast stove in blast furnace 高炉热风炉热平衡测定与计算方法 |
China National Standards 2015 |
English PDF |
GB/T 32283-2015 |
Test method for vapor attack on refractories for furnace superstructures 窑炉上部用耐火材料抗气体腐蚀性试验方法 |
China National Standards 2015 |
English PDF |
GB/T 32281-2015 |
Test method for measuring oxygen, carbon, boron and phosphorus in solar silicon wafers and feedstock by secondary ion mass spectrometry 太阳能级硅片和硅料中氧、碳、硼和磷量的测定 二次离子质谱法 |
China National Standards 2015 |
English PDF |
GB/T 32280-2015 |
Test method for warp of silicon wafers—Automated non-contact scanning method 硅片翘曲度测试 自动非接触扫描法 |
China National Standards 2015 |
English PDF |
GB/T 32279-2015 |
Specification for order entry format of silicon wafers 硅片订货单格式输入规范 |
China National Standards 2015 |
English PDF |
GB/T 32278-2015 |
Test methods for flatness of monocrystalline silicon carbide wafers 碳化硅单晶片平整度测试方法 |
China National Standards 2015 |
English PDF |
GB/T 32277-2015 |
Test method for instrumental neutron activation analysis (INAA) of silicon 硅的仪器中子活化分析测试方法 |
China National Standards 2015 |
English PDF |
GB/T 32269-2015 |
Nanotechnologies—Terminology and definitions for nano-objects—Nanoparticle, nanofibre and nanoplate 纳米科技 纳米物体的术语和定义 纳米颗粒、纳米纤维和纳米片 |
China National Standards 2015 |
English PDF |
GB/T 32267-2015 |
Terminology of performance testing for analytical instrument 分析仪器性能测定术语 |
China National Standards 2015 |
English PDF |
GB/T 32266-2015 |
Method of performance testing for atomic fluorescence spectrometer 原子荧光光谱仪性能测定方法 |
China National Standards 2015 |
English PDF |
GB/T 32264-2015 |
Method of performance testing for gas chromatography-single quadrupole mass pectrometry 气相色谱-单四极质谱仪性能测定方法 |
China National Standards 2015 |
English PDF |
GB/T 32262-2015 |
Preparation of deoxyribonucleic acid sample for atomic force microscope measurement 用于原子力显微镜检测的脱氧核糖核酸样品的制备方法 |
China National Standards 2015 |
English PDF |
GB/T 32221-2015 |
Vacuum technology—Vacuum thermal environmental simulation test equipment of spacecraft—General specification 真空技术 航天器用真空热环境模拟试验设备 通用技术条件 |
China National Standards 2015 |
English PDF |
GB/T 32219-2015 |
Cylinder mill—Cast grinding cylpebs 筒式磨机 铸造磨段 |
China National Standards 2015 |
English PDF |
GB/T 32218-2015 |
Vacuum technology—Test methods for leak rates of vacuum system 真空技术 真空系统漏率测试方法 |
China National Standards 2015 |
English PDF |
GB/T 32217-2015 |
Hydraulic fluid power—Sealing devices—Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications 液压传动 密封装置 评定液压往复运动密封件性能的试验方法 |
China National Standards 2015 |
English PDF |
GB/T 32216-2015 |
Hydraulic fluid power—Test method for the proportional/servo controlled hydraulic cylinder 液压传动 比例/伺服控制液压缸的试验方法 |
China National Standards 2015 |
English PDF |
GB/T 32179-2015 |
Chemical analysis of refractories—General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods 耐火材料化学分析 湿法、原子吸收光谱法(AAS)和电感耦合等离子体原子发射光谱法(ICP-AES)的一般要求 |
China National Standards 2015 |
English PDF |
GB/T 32178-2015 |
Refractory products and materials—Spectrometric determination of chromium (Ⅵ)in chrome refractories 分光法测定 含铬耐火材料中六价铬分析方法 |
China National Standards 2015 |
English PDF |
GB/T 32177-2015 |
Determination of boron oxide in refractory materials 耐火材料中B2O3的测定 |
China National Standards 2015 |
English PDF |
GB/T 3098.2-2015 |
Mechanical properties of fasteners—Nuts 紧固件机械性能 螺母 |
China National Standards 2015 |
English PDF |
GB/T 30544.3-2015 |
Nanotechnologies—Vocabulary—Part 3: Carbon nano-objects 纳米科技 术语 第3部分:碳纳米物体 |
China National Standards 2015 |
English PDF |
GB/T 2998-2015 |
Test method for bulk density and true porosity of shaped insulating refractory products 定形隔热耐火制品体积密度和真气孔率试验方法 |
China National Standards 2015 |
English PDF |
GB/T 2997-2015 |
Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products 致密定形耐火制品体积密度、显气孔率和真气孔率试验方法 |
China National Standards 2015 |
English PDF |
GB/T 26153.3-2015 |
Flexible manufacturing system of off-line programming robots—Part 3: Spraying system 离线编程式机器人柔性加工系统 第3部分:喷涂系统 |
China National Standards 2015 |
English PDF |
GB/T 25753.4-2015 |
Vacuum technology—Roots vacuum pump— Measurement of performance characteristics—Part 4: Measurement of noise 真空技术 罗茨真空泵性能测量方法 第4部分:噪声的测量 |
China National Standards 2015 |
English PDF |
GB/T 24578-2015 |
Test method for measuring surface metal contamination on silicon wafers by total reflection X-Ray fluorescence spectroscopy 硅片表面金属沾污的全反射X光荧光光谱测试方法 |
China National Standards 2015 |
English PDF |
GB/T 1962.1-2015 |
Conical fittings with a 6%(Luer) taper for syringes,needles and certain other medical equipment—Part 1: General requirement 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分:通用要求 |
China National Standards 2015 |
English PDF |
GB/T 18457-2015 |
Stainless steel needle tubing for the manufacture of medical devices 制造医疗器械用不锈钢针管 |
China National Standards 2015 |
English PDF |
GB/T 16886.7-2015 |
Biological evaluation of medical devices—Part 7: Ethylene oxide sterilization residuals 医疗器械生物学评价 第7部分:环氧乙烷灭菌残留量 |
China National Standards 2015 |
English PDF |
GB/T 16886.20-2015 |
Biological evaluation of medical devices—Part 20: Principles and methods for immunotoxicology testing of medical devices 医疗器械生物学评价 第20部分:医疗器械免疫毒理学试验原则和方法 |
China National Standards 2015 |
English PDF |
GB/T 13871.5-2015 |
Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 5: Identification of visual imperfections 密封元件为弹性体材料的旋转轴唇形密封圈 第5部分: 外观缺陷的识别 |
China National Standards 2015 |
English PDF |
GB/T 13871.2-2015 |
Rotary shaft lip-type seals incorporating elastomerice sealing elements—Part 2: Vocabulary 密封元件为弹性体材料的旋转轴唇形密封圈 第2部分:词汇 |
China National Standards 2015 |
English PDF |
GB/T 12962-2015 |
Monocrystalline silicon 硅单晶 |
China National Standards 2015 |
English PDF |
GB/T 10605-2015 |
Center driving rotary-rake thickener 中心传动式浓缩机 |
China National Standards 2015 |
English PDF |
GB 32311-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for hydrogen producing systems by water electrolysis 水电解制氢系统能效限定值及能效等级 |
China National Standards 2015 |
English PDF |
GB 32284-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for petrochemical centrifugal pumps 石油化工离心泵能效限定值及能效等级 |
China National Standards 2015 |
English PDF |
GB 32276-2015 |
Safety regulations for dust explosion protection in textile industry 纺织工业粉尘防爆安全规程 |
China National Standards 2015 |
English PDF |
GB 32275-2015 |
Technical specifications of pipeline safety apparatus for fire dampers and explosion protection in textile industry 纺织工业防火防爆管道安全装置技术规范 |
China National Standards 2015 |
English PDF |
GB 26920.2-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances—Part 2: Commercial refrigerated cabinets with self-contained condensing unit 商用制冷器具能效限定值和能效等级 第2部分:自携冷凝机组商用冷柜 |
China National Standards 2015 |
English PDF |
GB 20054-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for metal-halide lamps 金属卤化物灯能效限定值及能效等级 |
China National Standards 2015 |
English PDF |
GB 20053-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for ballasts of metal-halide lamps 金属卤化物灯用镇流器能效限定值及能效等级 |
China National Standards 2015 |
English PDF |
GB 18282.5-2015 |
Sterilization of health care products—Chemical indicators—Part 5:Class 2 indicators for Bowie and Dick-type air removal tests 医疗保健产品灭菌 化学指示物 第5部分:用于BD类空气排除测试的二类指示物 |
China National Standards 2015 |
English PDF |
GB 19577-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for water chillers 冷水机组能效限定值及能效等级 |
China National Standards 2015 |
English PDF |
GB 18282.1-2015 |
Sterilization of health care products—Chemical indicator—Part 1: General requirements 医疗保健产品灭菌 化学指示物 第1部分:通则 |
China National Standards 2015 |
English PDF |
GB 18281.5-2015 |
Sterilization of health care products—Biological indicator—Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes 医疗保健产品灭菌 生物指示物 第5部分:低温蒸汽甲醛灭菌用生物指示物 |
China National Standards 2015 |
English PDF |
GB 18281.4-2015 |
Sterilization of health care products—Biological indicators—Part 4: Biological indicators for dry heat sterilization processes 医疗保健产品灭菌 生物指示物 第4部分:干热灭菌用生物指示物 |
China National Standards 2015 |
English PDF |
GB 18281.3-2015 |
Sterilization of health care products—Biological indicators—Part 3: Biological indicators for moist heat sterilization processes 医疗保健产品灭菌 生物指示物 第3部分:湿热灭菌用生物指示物 |
China National Standards 2015 |
English PDF |
GB 18281.2-2015 |
Sterilization of health care products—Biological indicators—Part 2: Biological indicators for ethylene oxide sterilization processes 医疗保健产品灭菌 生物指示物 第2部分:环氧乙烷灭菌用生物指示物 |
China National Standards 2015 |
English PDF |
GB 18281.1-2015 |
Sterilization of health care products—Biological indicators—Part 1: General requirements 医疗保健产品灭菌 生物指示物 第1部分:通则 |
China National Standards 2015 |
English PDF |
GB 18279.1-2015 |
Sterilization of health care products—Ethylene oxide—Part 1: Requirements for development,validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 环氧乙烷 第1部分:医疗器械灭菌过程的开发、确认和常规控制的要求 |
China National Standards 2015 |
English PDF |
GB 18278.1-2015 |
Sterilization of health care products—Moist heat—Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 湿热 第1部分:医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards 2015 |
English PDF |
GB/T 8650-2015 |
Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards 2015 |
English PDF |
GB/T 7734-2015 |
Method for ultrasonic testing of clad steel plates 复合钢板超声检测方法 |
China National Standards 2015 |
English PDF |
GB/T 699-2015 |
Quality carbon structure steels 优质碳素结构钢 |
China National Standards 2015 |
English PDF |
GB/T 3429-2015 |
Wire rods for welding 焊接用钢盘条 |
China National Standards 2015 |
English PDF |
GB/T 3414-2015 |
Hot-rolled profiled steels for coal mechanism 煤机用热轧异型钢 |
China National Standards 2015 |
English PDF |
GB/T 32289-2015 |
Quality carbon structure steels and alloy structure steels for large forgings 大型锻件用优质碳素结构钢和合金结构钢 |
China National Standards 2015 |
English PDF |
GB/T 32288-2015 |
Electrical steel core for power transformers 电力变压器用电工钢铁心 |
China National Standards 2015 |
English PDF |
GB/T 32286.1-2015 |
Soft magnetic alloys—Part 1:Nickel-iron alloys 软磁合金 第1部分:铁镍合金 |
China National Standards 2015 |
English PDF |
GB/T 32285-2015 |
Hot-rolled steel H piles 热轧 H 型钢桩 |
China National Standards 2015 |
English PDF |
GB/T 32282-2015 |
Test method for disoclation density of GaN single crystal—Cathodoluminescence spectroscopy 氮化镓单晶位错密度的测量 阴极荧光显微镜法 |
China National Standards 2015 |
English PDF |
GB/T 32224-2015 |
Heat meters 热量表 |
China National Standards 2015 |
English PDF |
GB/T 32223-2015 |
Building hardware for windows and doors—General requirements 建筑门窗五金件 通用要求 |
China National Standards 2015 |
English PDF |
GB/T 32189-2015 |
Test method for surface roughness of GaN single crystal substrate by atomic force microscope 氮化镓单晶衬底表面粗糙度的原子力显微镜检验法 |
China National Standards 2015 |
English PDF |
GB/T 32188-2015 |
The method for full width at half maximum of double crystal X-ray rocking curve of GaN single crystal substrate 氮化镓单晶衬底片x射线双晶摇摆曲线半高宽测试方法 |
China National Standards 2015 |
English PDF |
GB/T 32185-2015 |
Titanium alloy large-sized bars 钛合金大规格棒材 |
China National Standards 2015 |
English PDF |
GB/T 32183-2015 |
Aluminium strips for computer-to-printing plates 计算机直接排版印刷版基用铝带材 |
China National Standards 2015 |
English PDF |
GB/T 32182-2015 |
Aluminium and aluminium alloy plates and sheets for railway application 轨道交通用铝及铝合金板材 |
China National Standards 2015 |
English PDF |
GB/T 32181-2015 |
Aluminium alloy welding wires for railway application 轨道交通焊接用铝合金线材 |
China National Standards 2015 |
English PDF |
GB/T 32166.2-2015 |
Personal protective equipment—Eye and face protection—Occupational eye and face protectors—Part 2: Test methods 个体防护装备 眼面部防护 职业眼面部防护具 第2部分:测量方法 |
China National Standards 2015 |
English PDF |
GB/T 3077-2015 |
Alloy structure steels 合金结构钢 |
China National Standards 2015 |
English PDF |
GB/T 20564.8-2015 |
Continuously cold rolled high strength steel sheet and strip for automobile—Part 8: Complex phase steel 汽车用高强度冷连轧钢板及钢带 第8部分:复相钢 |
China National Standards 2015 |
English PDF |
GB/T 19879-2015 |
Steel plates for building structure 建筑结构用钢板 |
China National Standards 2015 |
English PDF |
GB/T 14989-2015 |
Iron-cobalt-vanadium permanent-magnet alloys 铁钴钒永磁合金 |
China National Standards 2015 |
English PDF |
GB/T 32310-2015 |
Sterilization of health care products—Chemical indicators—Guidance for selection,use and interpretion of results 医疗保健产品灭菌 化学指示物 选择、使用和结果判断指南 |
China National Standards 2015 |
English PDF |
GB/T 32309-2015 |
Hydrogen peroxide low temperature plasma sterilizer 过氧化氢低温等离子体灭菌器 |
China National Standards 2015 |
English PDF |
GB/T 19973.1-2015 |
Sterilization of medical devices—Microbiological methods—Part 1: Determination of a population of microorganisms on products 医疗器械的灭菌 微生物学方法 第1部分:产品上微生物总数的测定 |
China National Standards 2015 |
English PDF |
GB/T 19971-2015 |
Sterilization of health care products—Vocabulary 医疗保健产品灭菌 术语 |
China National Standards 2015 |
English PDF |
GB/T 19633.2-2015 |
Packaging for terminally sterilized medical devices—Part 2: Validation requirements for forming, sealing and assembly processes 最终灭菌医疗器械包装 第2部分:成形、密封和装配过程的确认的要求 |
China National Standards 2015 |
English PDF |
GB/T 19633.1-2015 |
Packaging for terminally sterilized medical devices—Part 1: Requirements for materials, sterile barrier systems and packaging systems 最终灭菌医疗器械包装 第1部分:材料、无菌屏障系统和包装系统的要求 |
China National Standards 2015 |
English PDF |
GB/T 17006.11-2015 |
Evaluation and routine testing in medical imaging departments—Part 2-6: Constancy tests—Imaging performance of computed tomography X-ray equipment 医用成像部门的评价及例行试验 第2-6部分:X射线计算机体层摄影设备成像性能稳定性试验 |
China National Standards 2015 |
English PDF |
GB/T 14232.2-2015 |
Plastics collapsible containers for human blood and blood components—Part 2: Blood bag systems with integrated features 人体血液及血液成分袋式塑料容器 第2部分:用于标签和使用说明书的图形符号 |
China National Standards 2015 |
English PDF |
GB/T 32214.2-2015 |
Information technology—Generic applications of ASN.1—Part 2: Fast web services 信息技术 ASN.1的一般应用 第2部分:快速Web服务 |
China National Standards 2015 |
English PDF |
GB/T 32213-2015 |
Information security technology—Public key infrastructure—Specifications for remote password authentication and key establishment 信息安全技术 公钥基础设施 远程口令鉴别与密钥建立规范 |
China National Standards 2015 |
English PDF |
GB/T 31567-2015 |
Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers 用于空气-烟气、烟气-烟气再生式热交换器的搪瓷换热元件 |
China National Standards 2015 |
English PDF |
GB/T 30269.401-2015 |
Information technology—Sensor networks—Part 401: Collaborative information processing: Services and interfaces supporting collaborative information processing 信息技术 传感器网络 第401部分:协同信息处理:支撑协同信息处理的服务及接口 |
China National Standards 2015 |
English PDF |
GB/T 30269.1-2015 |
Information technology—Sensor networks—Part 1:Reference architecture and general technical requirements 信息技术 传感器网络 第1部分:参考体系结构和通用技术要求 |
China National Standards 2015 |
English PDF |
GB/T 20090.12-2015 |
Information technology—Advanced coding of audio and video—Part 12: Synthetic scene 信息技术 先进音视频编码 第12部分:综合场景 |
China National Standards 2015 |
English PDF |
GB/T 20090.11-2015 |
Information technology—Advanced coding of audio and video—Part 11: Synchronous text 信息技术 先进音视频编码 第11部分:同步文本 |
China National Standards 2015 |
English PDF |
GB/T 17969.1-2015 |
Information technology—Open systems interconnection—Procedures for the operation of OSI registration authorities—Part 1: General procedures and top arcs of the International Object Identifier tree 信息技术 开放系统互连 OSI登记机构的操作规程 第1部分:一般规程和国际对象标识符树的顶级弧 |
China National Standards 2015 |
English PDF |
GB/T 16263.5-2015 |
Information technology—ASN.1 Encoding rules—Part 5: Mapping W3C XML schema definitions into ASN.1 信息技术 ASN.1编码规则 第5部分:W3C XML模式定义到ASN.1的映射 |
China National Standards 2015 |
English PDF |
Find out:2231Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 |