Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB 50150-2016 |
Electric equipment installation enGineeringstandard for hand-over test of electric equipment 电气装置安装工程电气设备交接试验标准 |
China National Standards G |
 English PDF |
| GB/T 31989-2015 |
Power supply safety for hiGh voltage consumer 高压电力用户用电安全 |
China National Standards G |
English PDF |
| GB/T 32545-2016 |
Division of production Grade for iron ores 铁矿石产品等级的划分 |
China National Standards G |
English PDF |
| GB/T 32489-2016 |
Technical requirement of enerGy-saving operation for reheating furnace in steel rolling 轧钢加热炉节能运行技术要求 |
China National Standards G |
English PDF |
| GB 16757-2016 |
Protective clothinG—X-ray protective clothing 防护服装 X射线防护服 |
China National Standards G |
English PDF |
| GB/Z 32494-2016 |
Surface chemical analysis—AuGer electron spectroscopy—Derivation of chemical information 表面化学分析 俄歇电子能谱 化学信息的解析 |
China National Standards G |
English PDF |
| GB/Z 32490-2016 |
Surface chemical analysis—X-ray photoelectron spectroscopy—Procedures for determininG backgrounds 表面化学分析 X射线光电子能谱 确定本底的程序 |
China National Standards G |
English PDF |
| GB/T 9766.5-2016 |
Test method for tyre valves—Part 5: Test methods for larGe core chamber tyre valves 轮胎气门嘴试验方法 第5部分：大芯腔气门嘴试验方法 |
China National Standards G |
English PDF |
| GB/T 32571-2016 |
Corrosion of metals and alloys—Corrosion test for interGranular corrosion susceptibility of high—Cr ferritic stainless steels 金属和合金的腐蚀 高铬铁素体不锈钢晶间腐蚀试验方法 |
China National Standards G |
English PDF |
| GB/T 32570-2016 |
steel plates and strips for freiGht containers 集装箱用钢板及钢带 |
China National Standards G |
English PDF |
| GB/T 32565-2016 |
Surface chemical analysis—RecordinG and reporting data in Auger electron spectroscopy (AES) 表面化学分析 俄歇电子能谱（AES）数据记录与报告的规范要求 |
China National Standards G |
English PDF |
| GB/T 32546-2016 |
Technical requirements for application of steel slaG 钢渣应用技术要求 |
China National Standards G |
English PDF |
| GB/T 32498-2016 |
Metal matrix composites—Tensile testinG—Method of test at ambient temperature 金属基复合材料 拉伸试验 室温试验方法 |
China National Standards G |
English PDF |
| GB/T 32497-2016 |
Test method of ballistic resistance aGainst fragment simulating projectiles for fiber-reinforced composites—V50 method 纤维增强复合材料抗破片模拟弹性能试验方法 V50法 |
China National Standards G |
English PDF |
| GB/T 32496-2016 |
Test method for volume fraction of reinforcement in metal matrix composites—ImaGe analysis method 金属基复合材料增强体体积含量试验方法 图像分析法 |
China National Standards G |
English PDF |
| GB/T 32495-2016 |
Surface chemical analysis—Secondary-ion mass spectrometry—Method for depth profilinG of arsenic in silicon 表面化学分析 二次离子质谱 硅中砷的深度剖析方法 |
China National Standards G |
English PDF |
| GB/T 32493-2016 |
Test method of ballistic resistance for fibre reinforced composites—Specific absorbed enerGy by perforation method 纤维增强复合材料抗弹性能试验方法 贯穿比吸能法 |
China National Standards G |
English PDF |
| GB/T 32492-2016 |
Content of dimethyl ether in liquefied petroleum Gas by gas chromatography 液化石油气中二甲醚含量气相色谱分析法 |
China National Standards G |
English PDF |
| GB/T 32491-2016 |
Test method for lonG-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings 玻璃纤维增强热固性树脂管及管件长期静水压试验方法 |
China National Standards G |
English PDF |
| GB/T 32488-2016 |
Ductile iron pipes and fittinGs——Seal coats for cement mortar linings 球墨铸铁管和管件 水泥砂浆内衬密封涂层 |
China National Standards G |
English PDF |
| GB/T 1796.5-2016 |
Tyre valves—Part 5: Tyre valves for larGe core chamber 轮胎气门嘴 第5部分：大芯腔气门嘴 |
China National Standards G |
English PDF |
| GB/T 17505-2016 |
Steel and steel products—General technical delivery requirements 钢及钢产品 交货一般技术要求 |
China National Standards G |
English PDF |
| GB/T 4336-2016 |
Carbon and low-alloy steel—Determination of multi-element contents—Spark discharGe atomic emission spectrometric method (routine method) 碳素钢和中低合金钢 多元素含量的测定 火花放电原子发射光谱法（常规法） |
China National Standards G |
English PDF |
| GB/T 32554-2016 |
Fluorspar—Experimental methods for checkinG the bias of sampling and sample preparation 萤石 校核取样偏差的试验方法 |
China National Standards G |
English PDF |
| GB/T 32553-2016 |
Fluorspar—Method of determininG the precision of sampling and sample preparation 萤石 取样和制样精密度的试验方法 |
China National Standards G |
English PDF |
| GB/T 32552-2016 |
Automated full peripheral ultrasonic thickness testinG of seamless and welded (except submerged arc-welded) steel tubes 无缝和焊接钢管（埋弧焊除外）的自动全圆周超声厚度检测 |
China National Standards G |
English PDF |
| GB/T 32550-2016 |
Corrosion of metals and alloys—Determination of the critical pittinG temperature under potentiostatic control 金属和合金的腐蚀 恒电位控制下的临界点蚀温度测定 |
China National Standards G |
English PDF |
| GB/T 32547-2016 |
Method for maGnetic flux leakage testing of round steel 圆钢漏磁检测方法 |
China National Standards G |
English PDF |
| GB/T 30069.2-2016 |
Metallic materials—Tensile testinG at high strain rates—Part 2: Servo-hydraulic and other test systems 金属材料 高应变速率拉伸试验 第2部分：液压伺服型与其他类型试验系统 |
China National Standards G |
English PDF |
| GB/T 17897-2016 |
Corrosion of metals and alloys—Corrosion test for pittinG corrosion resistance of stainless steels in the ferric chloride solution 金属和合金的腐蚀 不锈钢三氯化铁点腐蚀试验方法 |
China National Standards G |
English PDF |
| GB/T 14991-2016 |
Deformable permanent-maGnet steels 变形永磁钢 |
China National Standards G |
English PDF |
| GB/T 14203-2016 |
General rules for spark discharge atomic emission spectrometry 火花放电原子发射光谱分析法通则 |
China National Standards G |
English PDF |
| GB/T 32563-2016 |
Non-destructive testinG—Ultrasonic testing—Test method for phased-array ultrasonic testing 无损检测 超声检测 相控阵超声检测方法 |
China National Standards G |
English PDF |
| GB/T 32562-2016 |
RollinG bearings—Measuring methods for friction torque 滚动轴承 摩擦力矩测量方法 |
China National Standards G |
English PDF |
| GB/T 32561.3-2016 |
MeasurinG method for chalcogenide infrared optical glass—Part 3: Impurity 红外光学硫系玻璃测试方法 第3部分：杂质 |
China National Standards G |
English PDF |
| GB/T 32561.2-2016 |
MeasurinG method for chalcogenide infrared optical glass—Part 2: Degree of striae 红外光学硫系玻璃测试方法 第2部分：条纹度 |
China National Standards G |
English PDF |
| GB/T 32561.1-2016 |
MeasurinG method for chalcogenide infrared optical glass—Part 1: Homogeneity 红外光学硫系玻璃测试方法 第1部分：均匀性 |
China National Standards G |
English PDF |
| GB/T 32559-2016 |
Infrared diamond-like carbon coatinG 红外类金刚石膜 |
China National Standards G |
English PDF |
| GB/Z 32519.3-2016 |
1000MW Class Hydraulic-Generator—Part 3: Quality Inspection Standards For Installation 1000MW级水轮发电机 第3部分：安装质量检测导则 |
China National Standards G |
English PDF |
| GB/Z 32519.2-2016 |
1000MW Class Hydro-Generators—Part 2: Testing And Inspecting Guide 1000MW级水轮发电机 第2部分：试验、检验导则 |
China National Standards G |
English PDF |
| GB/Z 32519.1-2016 |
1000MW Class Hydro-Generator—Part 1: Technical Guide 1000MW级水轮发电机 第1部分：技术导则 |
China National Standards G |
English PDF |
| GB/Z 32513-2016 |
General rules of reliability for low voltage apparatus 低压电器可靠性通则 |
China National Standards G |
English PDF |
| GB/Z 32501-2016 |
General requirements for communication system of smart grid user side 智能电网用户端通信系统一般要求 |
China National Standards G |
English PDF |
| GB/Z 32500-2016 |
General requirements of data interface for user side system of smart grid 智能电网用户端系统数据接口一般要求 |
China National Standards G |
English PDF |
| GB/Z 18509-2016 |
ElectromaGnetic compatibility—Guide to the drafting of electromagnetic compatibility standards 电磁兼容 电磁兼容标准起草导则 |
China National Standards G |
English PDF |
| GB/Z 16935.6-2016 |
Insulation coordination for equipment within low-voltaGe systems—Part 2-2: Interface considerations—Application guide 低压系统内设备的绝缘配合 第2-2部分：交界面考虑 应用指南 |
China National Standards G |
English PDF |
| GB/T 7144-2016 |
Coloured cylinder mark for Gases 气瓶颜色标志 |
China National Standards G |
English PDF |
| GB/T 6084-2016 |
Gear hobs—The general technical specification 齿轮滚刀 通用技术条件 |
China National Standards G |
English PDF |
| GB/T 6083-2016 |
The basic types and dimensions of Gear hobs 齿轮滚刀 基本型式和尺寸 |
China National Standards G |
English PDF |
| GB/T 6046-2016 |
AnaloGue quartz clocks 指针式石英钟 |
China National Standards G |
English PDF |
| GB/T 6044-2016 |
AnaloGue quartz watches 指针式石英手表 |
China National Standards G |
English PDF |
| GB/T 5959.11-2016 |
Safety in electroheat installations—Part 11: Particular requirements for installations usinG the effect of electromagnetic forces on liquid metals 电热装置的安全 第11部分：对液态金属电磁力作用装置的特殊要求 |
China National Standards G |
English PDF |
| GB/T 4854.9-2016 |
Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearinG threshold levels 声学 校准测听设备的基准零级 第9部分：确定基准听阈级的优选测试条件 |
China National Standards G |
English PDF |
| GB/T 4831-2016 |
Specification for model of rotatinG electrical motor 旋转电机产品型号编制方法 |
China National Standards G |
English PDF |
| GB/T 3767-2016 |
Acoustics—Determination of sound power levels and sound enerGy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定噪声源声功率级和声能量级 反射面上方近似自由场的工程法 |
China National Standards G |
English PDF |
| GB/T 3667.1-2016 |
AC motor capacitors—Part 1: General—Performance, testing and rating—Safety requirements—Guide for installation and operation 交流电动机电容器 第1部分：总则 性能、试验和额定值 安全要求 安装和运行导则 |
China National Standards G |
English PDF |
| GB/T 32557.2-2016 |
PolyGonal taper interface with flange contact surface—Part 2: Dimensions and designation of receivers 带有法兰接触面的多棱锥接口 第2部分：安装孔尺寸和标记 |
China National Standards G |
English PDF |
| GB/T 32557.1-2016 |
PolyGonal taper interface with flange contact surface—Part 1: Dimensions and designation of shanks 带有法兰接触面的多棱锥接口 第1部分：柄部尺寸和标记 |
China National Standards G |
English PDF |
| GB/T 32556.3-2016 |
Cutter arbors with tenon drive—Part 3: Dimensions of hollow taper interface with flanGe contact surface 带端键传动的铣刀杆 第3部分：带法兰接触面的空心锥柄的铣刀杆尺寸 |
China National Standards G |
English PDF |
| GB/T 32544-2016 |
Acoustic emission examination and evaluation methods of steel structures of bridGe and gantry cranes 桥式与门式起重机金属结构声发射检测及结果评定方法 |
China National Standards G |
English PDF |
| GB/T 32540-2016 |
Technical requirements for accuracy-controlled Gas nitriding heat treatment 精密气体渗氮热处理技术要求 |
China National Standards G |
English PDF |
| GB/T 32539-2016 |
HiGh temperature carburizing 高温渗碳 |
China National Standards G |
English PDF |
| GB/T 32538.2-2016 |
AGricultural vehicles—Mechanical connections on towed vehicles—Part 2: Coupling ring 40 with socket 农业车辆 被牵引车辆的机械连接装置 第2部分：带座孔的40连接环 |
China National Standards G |
English PDF |
| GB/T 32538.1-2016 |
AGricultural vehicles—Mechanical connections on towed vehicles—Part 1: Dimensions for hitch rings of 50/30 mm cross section 农业车辆 被牵引车辆的机械连接装置 第1部分：50mm/30mm横截面的挂接环尺寸 |
China National Standards G |
English PDF |
| GB/T 32533-2016 |
Covered electrodes for manual metal arc weldinG of high-strength steels 高强钢焊条 |
China National Standards G |
English PDF |
| GB/T 32532-2016 |
Nonconsumable tunGsten electrodes for arc welding and cutting 焊接与切割用钨极 |
China National Standards G |
English PDF |
| GB/T 32531-2016 |
PrintinG machinery—Violet laster digital direct plate setter 印刷机械 紫激光型数字直接制版机 |
China National Standards G |
English PDF |
| GB/T 32530-2016 |
Machinery for forestry—Saw chain shot Guarding systems—Test method and performance criteria 林业机械 锯链甩射防护系统 试验方法和性能要求 |
China National Standards G |
English PDF |
| GB/T 32529-2016 |
Technical requirement of cleaninG liquid waste recycling and emissions for heat treatment 热处理清洗废液回收及排放技术要求 |
China National Standards G |
English PDF |
| GB/T 32528-2016 |
PrintinG machinery—hard-cover book binding line 印刷机械 精装书籍联动线 |
China National Standards G |
English PDF |
| GB/T 32527-2016 |
DesiGn specification of space materials science experimental facility—Multifunctional high temperature furnace 空间材料科学实验装置 多功能高温炉设计规范 |
China National Standards G |
English PDF |
| GB/T 32526-2016 |
General specification for the equipment of passing azimuth angle vertically 方位垂直传递装置通用规范 |
China National Standards G |
English PDF |
| GB/T 32525-2016 |
General specification for photoelectric tracking and measuring equipment 光电跟踪测量设备通用规范 |
China National Standards G |
English PDF |
| GB/T 32524.2-2016 |
Acoustics—Determination of sound power level and directivity character of power capacitor usinG sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定电力电容器单元的声功率级和指向特性 第2部分：反射面上方近似自由场的工程法 |
China National Standards G |
English PDF |
| GB/T 32524.1-2016 |
Acoustics—Determination of sound power level and directivity character of power capacitor unit usinG sound pressure—Part 1: Precision method for hemi-anechoic rooms 声学 声压法测定电力电容器单元的声功率级和指向特性 第1部分：半消声室精密法 |
China National Standards G |
English PDF |
| GB/T 32523-2016 |
Acoustics—Measurement of sound pressure reflection coefficient, sound pressure transmission coefficient and absorption coefficient for underwater acoustical material sample—TravellinG wave tube method 声学 水声材料样品声压反射系数、声压透射系数和吸声系数的测量 行波管法 |
China National Standards G |
English PDF |
| GB/T 32522-2016 |
Acoustics—Electroacoustic characteristics and measurements of spherically focusinG ultrasonic transducers 声学 压电球面聚焦超声换能器的电声特性及其测量 |
China National Standards G |
English PDF |
| GB/T 32521-2016 |
Subdivision and numberinG for the lunar primary scale topographic maps 月球基本比例尺地形图分幅和编号 |
China National Standards G |
English PDF |
| GB/T 32520-2016 |
Metal-oxide surGe arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV 交流1 kV以上架空输电和配电线路用带外串联间隙金属氧化物避雷器（EGLA） |
China National Standards G |
English PDF |
| GB/T 32518.1-2016 |
Field test code of controlled shunt reactor of extra hiGh voltage—Part 1: Multistage controlled shunt reactor 超高压可控并联电抗器现场试验技术规范 第1部分：分级调节式 |
China National Standards G |
English PDF |
| GB/T 32516-2016 |
Thyristor valves of multistaGe controlled shunt reactors in extra high-voltage transmission systems 超高压分级式可控并联电抗器晶闸管阀 |
China National Standards G |
English PDF |
| GB/T 32515-2016 |
Variable-frequency drive for injection moldinG machine 注塑机专用变频调速设备 |
China National Standards G |
English PDF |
| GB/T 32514.5-2016 |
Resistance weldinG—Welding current measurement for resistance welding—Part 5: Verification of welding current measuring system 电阻焊 焊接电流的测量 第5部分：焊接电流测量系统的确认 |
China National Standards G |
English PDF |
| GB/T 32514.4-2016 |
Resistance weldinG—Welding current measurement for resistance welding—Part 4: Calibration system 电阻焊 焊接电流的测量 第4部分：校准系统 |
China National Standards G |
English PDF |
| GB/T 32514.3-2016 |
Resistance weldinG—Welding current measurement for resistance welding—Part 3: Current sensing coil 电阻焊 焊接电流的测量 第3部分：电流感应线圈 |
China National Standards G |
English PDF |
| GB/T 32514.2-2016 |
Resistance weldinG—Welding current measurement for resistance welding—Part 2: Welding current meter with current sensing coil 电阻焊 焊接电流的测量 第2部分：带电流感应线圈的焊接电流测量仪 |
China National Standards G |
English PDF |
| GB/T 32514.1-2016 |
Resistance weldinG—Welding current measurement for resistance welding—Part 1: Guidelines for measurement 电阻焊 焊接电流的测量 第1部分：测量指南 |
China National Standards G |
English PDF |
| GB/T 32512-2016 |
Technical requirements for protection of photovoltaic power station aGainst lightning 光伏发电站防雷技术要求 |
China National Standards G |
English PDF |
| GB/T 32511-2016 |
General technical requirements for electromagnetic shielding plastic 电磁屏蔽塑料通用技术要求 |
China National Standards G |
English PDF |
| GB/T 32510-2016 |
Guide for pumped storage power plant identification system 抽水蓄能电厂标识系统（KKS）编码导则 |
China National Standards G |
English PDF |
| GB/T 32509-2016 |
General specification for vanadium flow battery 全钒液流电池通用技术条件 |
China National Standards G |
English PDF |
| GB/T 32508-2016 |
Quantitative determination of corrosive sulfur (dibenzyl disulfide , DBDS) in insulatinG liquids 绝缘油中腐蚀性硫（二苄基二硫醚）定量检测方法 |
China National Standards G |
English PDF |
| GB/T 32506-2016 |
Code for operation and maintenance for excitation system of pumped-storaGe unit 抽水蓄能机组励磁系统运行检修规程 |
China National Standards G |
English PDF |
| GB/T 32503.1-2016 |
Household and similar adjustable frequency converter safety—Part 1: General requirements 家用和类似用途变频控制器的安全 第1部分：通用要求 |
China National Standards G |
English PDF |
| GB/T 32499-2016 |
ConnectinG devices—Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units 连接器件 任何材料的夹紧件用铝线的连接器件及铝基夹紧件用铜线的连接器件 |
China National Standards G |
English PDF |
| GB/T 32487-2016 |
General technical requirements for plastic furniture 塑料家具通用技术条件 |
China National Standards G |
English PDF |
| GB/T 32486-2016 |
General specification for LED luminaries of stage 舞台LED灯具通用技术要求 |
China National Standards G |
English PDF |
| GB/T 32484-2016 |
Watch-cases and accessories—Vapour phase deposited coatinGs 表壳体及其附件 气相沉积镀层 |
China National Standards G |
English PDF |
| GB/T 32483.3-2016 |
EnerGy performance of lamp controlgear—Part 3: Controlgear for halogen lamps and LED modules—Method of measurement to determine the efficiency of the controlgear 灯控制装置的效率要求 第3部分：卤钨灯和LED模块 控制装置效率的测量方法 |
China National Standards G |
English PDF |
| GB/T 32482.1-2016 |
LED—BinninG—Part 1: General requirements and white colour grid LED 分选 第1部分：一般要求和白光栅格 |
China National Standards G |
English PDF |
| Find out:40037Items | To Page of: First -Previous-Next -Last | [150] [151] [152] [153] [154] [155] [156] |
+86-755-25831330
