Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 32481-2016 |
Performance requirements of LED luminaires for tunnel liGhting 隧道照明用LED灯具性能要求 |
China National Standards G |
 English PDF |
| GB/T 32480-2016 |
Textile machinery—MixinG bale openers for cotton spinning—Vocabulary and principles of construction 纺织机械 棉纺用开包混棉机 术语、定义和结构原理 |
China National Standards G |
English PDF |
| GB/T 32479-2016 |
General safety technical requirements for recycled fiber 再加工纤维基本安全技术要求 |
China National Standards G |
English PDF |
| GB/T 32478-2016 |
Household and similar electrical appliances method of measurinG performance —Assessment of repeatability and reproducibility 家用和类似用途电器性能测试方法 重复性和再现性评价 |
China National Standards G |
English PDF |
| GB/T 32476-2016 |
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensinG system 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件 |
China National Standards G |
English PDF |
| GB/T 32475-2016 |
Rubber hose and hose assemblies for coal seam water injection,Gas drainage and drilling plugging 煤层注水、钻孔封堵及瓦斯排放橡胶软管和软管组合件 |
China National Standards G |
English PDF |
| GB/T 32474-2016 |
Rubber hoses and hose assemblies for petroleum drillinG well control equipments 石油钻井井控设备用橡胶软管及软管组合件 |
China National Standards G |
English PDF |
| GB/T 32473-2016 |
Ion exchanGe resins for condensate polishing treatment 凝结水精处理用离子交换树脂 |
China National Standards G |
English PDF |
| GB/T 32472-2016 |
D113 macroporous weak acid acrylic type cation exchanGe resins D113大孔弱酸性丙烯酸系阳离子交换树脂 |
China National Standards G |
English PDF |
| GB/T 6882-2016 |
Acoustics—Determination of sound power levels and sound enerGy levels of noise sources using sound pressure—Precision methods for anechoic rooms and hemi-anechoic rooms 声学 声压法测定噪声源声功率级和声能量级 消声室和半消声室精密法 |
China National Standards G |
English PDF |
| GB/T 31052.7-2016 |
LiftinG appliances—Code of inspection and maintenance—Part 7: Derrick cranes 起重机械 检查与维护规程 第7部分：桅杆起重机 |
China National Standards G |
English PDF |
| GB/T 31052.10-2016 |
LiftinG appliances—Code of inspection and maintenance—Part 10: Series lifting equipments 起重机械 检查与维护规程 第10部分：轻小型起重设备 |
China National Standards G |
English PDF |
| GB/T 2970-2016 |
Method for ultrasonic testinG of thicker steel plates 厚钢板超声检测方法 |
China National Standards G |
English PDF |
| GB/T 2900.20-2016 |
Electrotechnical terminoloGy High-voltage switchgear and controlgear 电工术语 高压开关设备和控制设备 |
China National Standards G |
English PDF |
| GB/T 25774.2-2016 |
Test methods for weldinG consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验 |
China National Standards G |
English PDF |
| GB/T 2550-2016 |
Gas welding equipment—Rubber hoses for welding, cutting and allied processes 气体焊接设备 焊接、切割和类似作业用橡胶软管 |
China National Standards G |
English PDF |
| GB/T 23724.1-2016 |
Cranes—Inspections—Part 1: General 起重机 检查 第1部分：总则 |
China National Standards G |
English PDF |
| GB/T 22715-2016 |
Impulse voltaGe withstand levels of form-wound stator coils for rotating a.c. machines 旋转交流电机定子成型线圈耐冲击电压水平 |
China National Standards G |
English PDF |
| GB/T 20835-2016 |
Guides for magnetization test of generator stator core 发电机定子铁心磁化试验导则 |
China National Standards G |
English PDF |
| GB/T 20833.2-2016 |
RotatinG electrical machines—The stator winding insulation of rotating electrical machines—Part 2: On-line partial discharge measurements on 旋转电机 旋转电机定子绕组绝缘 第2部分：在线局部放电测量 |
China National Standards G |
English PDF |
| GB/T 20833.1-2016 |
RotatinG electrical machines—The stator winding insulation of rotating electrical machines—Part 1: Off-line partial discharge measurements 旋转电机 旋转电机定子绕组绝缘 第1部分：离线局部放电测量 |
China National Standards G |
English PDF |
| GB/T 20448.2-2016 |
Self-propelled machinery for forestry—Laboratory tests and performance requirements for roll-over protective structures—Part 2: Machines havinG a rotating platform with a cab and boom on the platform 自行式林业机械 滚翻保护结构实验室试验和性能要求 第2部分：回转平台上安装驾驶室和起重臂的机械 |
China National Standards G |
English PDF |
| GB/T 20408-2016 |
Radio-controlled analoGue clocks 指针式电波钟 |
China National Standards G |
English PDF |
| GB/T 20343-2016 |
AGricultural tractors and machinery—Connection of implements via three point linkage—Clearance zone around implement 农业拖拉机和机械 三点悬挂机具的连接装置 机具周围的间隙范围 |
China National Standards G |
English PDF |
| GB/T 20341-2016 |
Tractors and self-propelled machinery for aGriculture—Operator controls—Actuating forces, displacement, location and method of operation 农业拖拉机和自走式机械 操作者操纵装置 操纵力、操纵方向、操纵位置和方法 |
China National Standards G |
English PDF |
| GB/T 20290-2016 |
Electric dishwashers for household use—Methods for measurinG the performance 家用电动洗碗机 性能测试方法 |
China National Standards G |
English PDF |
| GB/T 20140-2016 |
Measurement method and evaluation criteria of dynamic characteristic and vibration on stator end windinGs of cylindrical synchronous generators 隐极同步发电机定子绕组端部动态特性和振动测量方法及评定 |
China National Standards G |
English PDF |
| GB/T 20041.25-2016 |
Conduit systems for cable manaGement— Part 25: Particular requirements for conduit fixing devices 电缆管理用导管系统 第25部分：导管固定装置的特殊要求 |
China National Standards G |
English PDF |
| GB/T 19749.1-2016 |
CouplinG capacitors and capacitor dividers—Part 1: General rules 耦合电容器和电容分压器 第1部分：总则 |
China National Standards G |
English PDF |
| GB/T 19436.4-2016 |
Electrical safety of machinery—Electro-sensitive protective equipment—Part 4: Particular requirements for equipment usinG vision based protective devices (VBPD) 机械电气安全 电敏保护设备 第4部分：使用视觉保护装置（VBPD）设备的特殊要求 |
China National Standards G |
English PDF |
| GB/T 19355.3-2016 |
Zinc coatinGs—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 3: Sherardizing 锌覆盖层 钢铁结构防腐蚀的指南和建议 第3部分：粉末渗锌 |
China National Standards G |
English PDF |
| GB/T 19355.2-2016 |
Zinc coatinGs—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 2: Hot dip galvanizing 锌覆盖层 钢铁结构防腐蚀的指南和建议 第2部分：热浸镀锌 |
China National Standards G |
English PDF |
| GB/T 19355.1-2016 |
Zinc coatinGs—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 1: General principles of design and corrosion resistance 锌覆盖层 钢铁结构防腐蚀的指南和建议 第1部分：设计与防腐蚀的基本原则 |
China National Standards G |
English PDF |
| GB/T 19040-2016 |
AGricultural tractors—Requirements for steering 农业拖拉机 转向要求 |
China National Standards G |
English PDF |
| GB/T 18802.31-2016 |
Low-voltaGe surge protective devices—Surge protective devices for specific application including d.c.—Part 31: Requirements and tests for SPDs in photovoltaic applications 低压电涌保护器 特殊应用（含直流）的电涌保护器 第31部分：用于光伏系统的电涌保护器（SPD） 性能要求和试验方法 |
China National Standards G |
English PDF |
| GB/T 18802.21-2016 |
Low-voltaGe surge protective devices—Part 21: Surge protective devices connected to telecommunications and signaling networks—Performance requirements and testing methods 低压电涌保护器 第21部分：电信和信号网络的电涌保护器（SPD） 性能要求和试验方法 |
China National Standards G |
English PDF |
| GB/T 18737.9-2016 |
Textile machinery and accessories—Beams for windinG—Part 9: Dyeing beams for textile fabrics fabrics 纺织机械与附件 经轴 第9部分：织物染色用轴 |
China National Standards G |
English PDF |
| GB/T 18737.7-2016 |
Textile machinery and accessories—Beams for windinG—Part 7：Beams for dyeing slivers, rovings and yarns 纺织机械与附件 经轴 第7部分：条子、粗纱和纱线染色用轴 |
China National Standards G |
English PDF |
| GB/T 17948.7-2016 |
RotatinG electrical machines—Functional evaluation of insulation systems—General guidelines 旋转电机 绝缘结构功能性评定 总则 |
China National Standards G |
English PDF |
| GB/T 17948.5-2016 |
RotatinG electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Multifactor evaluation by endurance under simultaneous thermal and electrical stresses 旋转电机 绝缘结构功能性评定 成型绕组试验规程 热、电综合应力耐久性多因子评定 |
China National Standards G |
English PDF |
| GB/T 17948.4-2016 |
RotatinG electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Evaluation by electrical endurance 旋转电机 绝缘结构功能性评定 成型绕组试验规程 电压耐久性评定 |
China National Standards G |
English PDF |
| GB/T 16896.2-2016 |
Instruments and software used for measurement in hiGh-voltage and high-current tests—Part 2: Requirements for software for tests with impulse voltages and currents 高电压和大电流试验测量用仪器和软件 第2部分：对冲击电压和冲击电流试验用软件的要求 |
China National Standards G |
English PDF |
| GB/T 16461-2016 |
Tool-life testinG with single-point turning tools 单刃车削刀具寿命试验 |
China National Standards G |
English PDF |
| GB/T 16460-2016 |
Tool life testinG in end milling 立铣刀寿命试验 |
China National Standards G |
English PDF |
| GB/T 16459-2016 |
Tool life testinG in face milling 面铣刀寿命试验 |
China National Standards G |
English PDF |
| GB/T 16296.2-2016 |
Acoustics—Audiometric test methods—Part 2: Sound-field audiometry with pure-tone and narrow-band test siGnals 声学 测听方法 第2部分：用纯音及窄带测试信号的声场测听 |
China National Standards G |
English PDF |
| GB/T 1592.3-2016 |
AGricultural tractors—Rear-mounted power take-off types 1,2 ,3 and 4—Part 3: Main PTO dimensions and spline dimensions, location of PTO 农业拖拉机 后置动力输出轴 1、2、3和4型 第3部分：动力输出轴尺寸和花键尺寸、动力输出轴位置 |
China National Standards G |
English PDF |
| GB/T 1592.2-2016 |
AGricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第2部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards G |
English PDF |
| GB/T 1592.1-2016 |
AGricultural tractors—Rear-mounted power take-off types 1, 2, 3 and 4—Part 1: General specifications，safety requirements，dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards G |
English PDF |
| GB/T 15370.6-2016 |
AGricultural tractors—General requirements—Part 6：Four-wheel boat tractors 农业拖拉机 通用技术条件 第6部分：四轮船式拖拉机 |
China National Standards G |
English PDF |
| GB/T 14598.149-2016 |
MeasurinG relays and protection equipment—Part 149: Functional requirements for thermal electrical relays 量度继电器和保护装置 第149部分：电热继电器功能要求 |
China National Standards G |
English PDF |
| GB/T 1443-2016 |
Self-holdinG tapers for machine tools and tool shanks 机床和工具柄用自夹圆锥 |
China National Standards G |
English PDF |
| GB/T 14048.7-2016 |
Low-voltaGe switchgear and controlgear—Part 7-1：Ancillary equipment—Terminal blocks for copper conductors 低压开关设备和控制设备 第7-1部分：辅助器件 铜导体的接线端子排 |
China National Standards G |
English PDF |
| GB/T 14048.18-2016 |
Low-voltaGe switchgear and controlgear—Part 7-3: Ancillary equipment—Safety requirements for fuse terminal blocks 低压开关设备和控制设备 第7-3部分：辅助器件 熔断器接线端子排的安全要求 |
China National Standards G |
English PDF |
| GB/T 13075-2016 |
Periodic inspection and evaluation of welded steel Gas cylinders 钢质焊接气瓶定期检验与评定 |
China National Standards G |
English PDF |
| GB/T 13004-2016 |
Periodic inspection and evaluation of seamless steel Gas cylinders 钢质无缝气瓶定期检验与评定 |
China National Standards G |
English PDF |
| GB/T 12145-2016 |
Quality criterion of water and steam for power plant and steam-Generating equipment 火力发电机组及蒸汽动力设备水汽质量 |
China National Standards G |
English PDF |
| GB/T 10284-2016 |
Forestry machinery—Portable pneumatic fire extinGuisher—Measurement of noise 林业机械 便携式风力灭火机 噪声的测定 |
China National Standards G |
English PDF |
| GB/T 10283-2016 |
Forestry machinery—Portable pneumatic fire extinGuisher—Measurement of vibration 林业机械 便携式风力灭火机 振动的测定 |
China National Standards G |
English PDF |
| GB/T 10233-2016 |
Basic testinG method for low-voltage switchgear and controlgear assemblies 低压成套开关设备和电控设备基本试验方法 |
China National Standards G |
English PDF |
| GB/T 10067.8-2016 |
Basic specifications for electroheat installations—Part 8: ElectroslaG remelting furnaces 电热装置基本技术条件 第8部分：电渣重熔炉 |
China National Standards G |
English PDF |
| GB/T 10066.11-2016 |
Test method for electroheat installations—Part 11: SubmerGed-arc furnaces 电热装置的试验方法 第11部分：埋弧炉 |
China National Standards G |
English PDF |
| GB/T 7920.4-2016 |
Concrete machinery terminoloGy 混凝土机械术语 |
China National Standards G |
English PDF |
| GB/T 32543-2016 |
BuildinG construction machinery and equipment—Concrete delivery pipes—Connection types and safety requirements 建筑施工机械与设备 混凝土输送管 连接型式和安全要求 |
China National Standards G |
English PDF |
| GB/Z 32564-2016 |
Nut desiGn guide 螺母设计指南 |
China National Standards G |
English PDF |
| GB/T 9097-2016 |
Sintered metal materials，excludinG hardmetals—Determination of apparent hardness and mincrohardness 烧结金属材料（不包括硬质合金） 表观硬度和显微硬度的测定 |
China National Standards G |
English PDF |
| GB/T 889.2-2016 |
PrevailinG torque type hexagon nuts (with non-metallic insert), style 1—Fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards G |
English PDF |
| GB/T 6187.2-2016 |
PrevailinG torque type all-metal hexagon nuts with flange, style 2—Fine pitch thread 2型全金属六角法兰面锁紧螺母 细牙 |
China National Standards G |
English PDF |
| GB/T 6187.1-2016 |
PrevailinG torque type all-metal hexagon nuts with flange, style 2 2型全金属六角法兰面锁紧螺母 |
China National Standards G |
English PDF |
| GB/T 6185.2-2016 |
PrevailinG torque type all-metal hexagon nuts,style 2—Fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards G |
English PDF |
| GB/T 6185.1-2016 |
PrevailinG torque type all-metal hexagon nuts, style 2 2型全金属六角锁紧螺母 |
China National Standards G |
English PDF |
| GB/T 6183.2-2016 |
PrevailinG torque type hexagon nuts with flange(with non-metallic insert), style 2—Fine pitch thread 2型非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards G |
English PDF |
| GB/T 6183.1-2016 |
PrevailinG torque type hexagon nuts with flange( with non-metallic insert), style 2 2型非金属嵌件六角法兰面锁紧螺母 |
China National Standards G |
English PDF |
| GB/T 6182-2016 |
PrevailinG torque type hexagon nuts (with non-metallic insert), style 2 2型非金属嵌件六角锁紧螺母 |
China National Standards G |
English PDF |
| GB/T 6177.2-2016 |
HexaGon nuts with flange,style 2—Fine pitch thread 2型六角法兰面螺母 细牙 |
China National Standards G |
English PDF |
| GB/T 6177.1-2016 |
HexaGon nuts with flange, style 2 2型六角法兰面螺母 |
China National Standards G |
English PDF |
| GB/T 6176-2016 |
HexaGon nuts,style2—Fine pitch thread 2型六角螺母 细牙 |
China National Standards G |
English PDF |
| GB/T 6175-2016 |
HexaGon nuts,style 2 2型六角螺母 |
China National Standards G |
English PDF |
| GB/T 6174-2016 |
HexaGon thin nuts—unchamfered 六角薄螺母 无倒角 |
China National Standards G |
English PDF |
| GB/T 6172.2-2016 |
PrevailinG torque type hexagon thin nuts(with non-metallic insert) 非金属嵌件六角锁紧薄螺母 |
China National Standards G |
English PDF |
| GB/T 6172.1-2016 |
HexaGon thin nuts(chamfered) 六角薄螺母 |
China National Standards G |
English PDF |
| GB/T 6171-2016 |
HexaGon regular nuts（style1）with metric fine pitch thread 六角标准螺母（1型） 细牙 |
China National Standards G |
English PDF |
| GB/T 5786-2016 |
HexaGon head bolts—Fine pitch thread—Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards G |
English PDF |
| GB/T 5785-2016 |
HexaGon head bolts—Fine pitch thread 六角头螺栓 细牙 |
China National Standards G |
English PDF |
| GB/T 5783-2016 |
HexaGon head bolts—Full thread 六角头螺栓 全螺纹 |
China National Standards G |
English PDF |
| GB/T 5782-2016 |
HexaGon head bolts 六角头螺栓 |
China National Standards G |
English PDF |
| GB/T 5781-2016 |
HexaGon head bolts—Full thread—Product grade C 六角头螺栓 全螺纹 C级 |
China National Standards G |
English PDF |
| GB/T 5780-2016 |
HexaGon head bolts—Product grade C 六角头螺栓 C级 |
China National Standards G |
English PDF |
| GB/T 41-2016 |
HexaGon nuts,style 1—Product grade C 1型六角螺母 C级 |
China National Standards G |
English PDF |
| GB/T 3106-2016 |
Fasteners—Bolts,screws and studs—Nominal lenGths and thread lengths 紧固件 螺栓、螺钉和螺柱 公称长度和螺纹长度 |
China National Standards G |
English PDF |
| GB/T 3098.5-2016 |
Mechanical properties of fasteners—TappinG screws 紧固件机械性能 自攻螺钉 |
China National Standards G |
English PDF |
| GB/T 29024.2-2016 |
Determination of particle size distribution—SinGle particle light interaction methods—Part 2: Light scattering liquid-borne particle counter 粒度分析 单颗粒的光学测量方法 第2部分：液体颗粒计数器光散射法 |
China National Standards G |
English PDF |
| GB/T 29023.2-2016 |
Measurement and characterization of particles by acoustic method—Part 2: Guidelines for linear theory 超声法颗粒测量与表征 第2部分：线性理论准则 |
China National Standards G |
English PDF |
| GB/T 20303.1-2016 |
Cranes—Cabins and control stations—Part 1: General 起重机 司机室和控制站 第1部分：总则 |
China National Standards G |
English PDF |
| GB/T 20100-2016 |
Stainless steel fiber sinterinG medium 不锈钢纤维烧结滤毡 |
China National Standards G |
English PDF |
| GB/T 16939-2016 |
HiGh strength bolts for joints of space grid structures 钢网架螺栓球节点用高强度螺栓 |
China National Standards G |
English PDF |
| GB/T 16824.2-2016 |
HexaGon flange head tapping screws 六角法兰面自攻螺钉 |
China National Standards G |
English PDF |
| GB/T 16824.1-2016 |
HexaGon washer head tapping screws 六角凸缘自攻螺钉 |
China National Standards G |
English PDF |
| GB/T 16674.2-2016 |
HexaGon bolts with flange—Fine pitch thread—Small series 六角法兰面螺栓 细牙 小系列 |
China National Standards G |
English PDF |
| GB/T 16674.1-2016 |
HexaGon bolts with flange—Small series 六角法兰面螺栓 小系列 |
China National Standards G |
English PDF |
| Find out:40037Items | To Page of: First -Previous-Next -Last | [151] [152] [153] [154] [155] [156] [157] |
+86-755-25831330
