GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 50148-2010 |
Code for construction and acceptance of power transformers oil REactor and mutual inductor 电气装置安装工程电力变压器、油浸电抗器、互感器施工及验收规范 |
China National Standards RE |
English PDF |
GB 10770-2010 |
National Food Safety Standard-Canned supplementary food for infants and young childREn 食品安全国家标准 婴幼儿罐装辅助食品 |
China National Standards RE |
English PDF |
GB 10767-2010 |
National food safety standard Older infants and young childREn formula 食品安全国家标准 较大婴儿和幼儿配方食品 |
China National Standards RE |
English PDF |
GB 23790-2010 |
National Food Safety Standard-Good Manufacturing Practices for PowdeREd Infant Formula Foods 食品安全国家标准 粉状婴幼儿配方食品良好生产规范 |
China National Standards RE |
English PDF |
GB 19646-2010 |
National food safety standard CREam,butter and anhydrous milkfat 食品安全国家标准 稀奶油、奶油和无水奶油 |
China National Standards RE |
English PDF |
GB 5413.38-2010 |
National Food Safety Standard-Determination of fREezing point of raw milk 食品安全国家标准 生乳冰点的测定 |
China National Standards RE |
English PDF |
GB 5413.36-2010 |
National Food Safety Standard-Infant and young childREn - Determination of trans fatty acids in foods and dairy products 食品安全国家标准 婴幼儿食品和乳品中反式脂肪酸的测定 |
China National Standards RE |
English PDF |
GB 5413.33-2010 |
National Food Safety Standard-Determination of RElative density of raw milk 食品安全国家标准 生乳相对密度的测定 |
China National Standards RE |
English PDF |
GB 5413.30-2010 |
National Food Safety Standard-Milk and dairy products - Determination of the degREe of impurity 食品安全国家标准 乳和乳制品杂质度的测定 |
China National Standards RE |
English PDF |
GB 5413.29-2010 |
National Food Safety Standard-Determination of solubility in foods and dairy products for infants and young childREn 食品安全国家标准 婴幼儿食品和乳品中溶解性的测定 |
China National Standards RE |
English PDF |
GB 5413.27-2010 |
National Food Safety Standard-Infant and young childREn - Determination of fatty acids in foods and dairy products 食品安全国家标准 婴幼儿食品和乳品中脂肪酸的测定 |
China National Standards RE |
English PDF |
GB 5413.26-2010 |
National Food Safety Standard-Infant and young childREn - Determination of taurine in foods and dairy products 食品安全国家标准 婴幼儿食品和乳品中牛磺酸的测定 |
China National Standards RE |
English PDF |
GB 5413.25-2010 |
National Food Safety Standard-Infant and young childREn - Determination of inositol in foods and dairy products 食品安全国家标准 婴幼儿食品和乳品中肌醇的测定 |
China National Standards RE |
English PDF |
GB 5413.24-2010 |
National Food Safety Standard-Determination of chlorine in foods and dairy products for infants and young childREn 食品安全国家标准 婴幼儿食品和乳品中氯的测定 |
China National Standards RE |
English PDF |
GB 5413.23-2010 |
National Food Safety Standard-Determination of iodine in foods and dairy products for infants and young childREn 食品安全国家标准 婴幼儿食品和乳品中碘的测定 |
China National Standards RE |
English PDF |
GB 5413.22-2010 |
National Food Safety Standard-Infant and young childREn - Determination of phosphorus in foods and dairy products 食品安全国家标准 婴幼儿食品和乳品中磷的测定 |
China National Standards RE |
English PDF |
GB 5413.19-2010 |
National Food Safety Standard-Determination of fREe biotin in infant foods and dairy products 食品安全国家标准 婴幼儿食品和乳品中游离生物素的测定 |
China National Standards RE |
English PDF |
GB 5413.17-2010 |
National Food Safety Standard-Infant and young childREn - Determination of pantothenic acid in foods and dairy products 食品安全国家标准 婴幼儿食品和乳品中泛酸的测定 |
China National Standards RE |
English PDF |
GB 5009.3-2010 |
National Food Safety Standard-Determination of moistuRE in foodstuffs 食品安全国家标准 食品中水分的测定 |
China National Standards RE |
English PDF |
GB 4789.10-2010 |
National Food Safety Standard-Microbiological examination of foods - Examination of Staphylococcus auREus 食品安全国家标准 食品微生物学检验 金黄色葡萄球菌检验 |
China National Standards RE |
English PDF |
GB 5413.3-2010 |
National food safety standard Determination of fat in foods for infants and young childREn,milk and milk products 食品安全国家标准 婴幼儿食品和乳品中脂肪的测定 |
China National Standards RE |
English PDF |
GB 5413.9-2010 |
National food safety standard Determination of vitamin A,D,E in foods for infants and young childREn,milk and milk products 食品安全国家标准 婴幼儿食品和乳品中维生素A、D、E的测定 |
China National Standards RE |
English PDF |
GB 5413.5-2010 |
National food safety standard Determination of lactose and sucrose in foods for infants and young childREn,milk and milk products 食品安全国家标准 婴幼儿食品和乳品中乳糖、蔗糖的测定 |
China National Standards RE |
English PDF |
GB 5413.6-2010 |
National food safety standard Determination of insoluble dietary fiber in foods for infants and young childREn,milk and milk products 食品安全国家标准 婴幼儿食品和乳品中不溶性膳食纤维的测定 |
China National Standards RE |
English PDF |
GB 10769-2010 |
National Food Safety Standard-CeREal supplement food for infants and young children 食品安全国家标准 婴幼儿谷类辅助食品 |
China National Standards RE |
English PDF |
GB 50530-2010 |
Code for design of alumina REfinery process 氧化铝厂工艺设计规范 |
China National Standards RE |
English PDF |
GB 50072-2010 |
Code for design of cold stoRE 冷库设计规范 |
China National Standards RE |
English PDF |
GB 4706.99-2009 |
Household and similar electrical appliances - Safety - Particular REquirements for thermal-storage hand warmers 家用和类似用途电器的安全 储热式电热暖手器的特殊要求 |
China National Standards RE |
English PDF |
GB 4706.100-2009 |
Household and similar electrical appliances - Safety - Particular REquirements for multifunctional shower room 家用和类似用途电器的安全 多功能淋浴房的特殊要求 |
China National Standards RE |
English PDF |
GB 24820-2009 |
Laboratory furnituRE - General technical requirements 实验室家具通用技术条件 |
China National Standards RE |
English PDF |
GB 9765-2009 |
TyRE valve threads 轮胎气门嘴螺纹 |
China National Standards RE |
English PDF |
GB 9764-2009 |
TyRE valve-core chambers 轮胎气门嘴芯腔 |
China National Standards RE |
English PDF |
GB 9745-2009 |
Aircraft tyREs 航空轮胎 |
China National Standards RE |
English PDF |
GB 7544-2009 |
Natural latex rubber condoms - REquirements and test methods 天然胶乳橡胶避孕套 技术要求与试验方法 |
China National Standards RE |
English PDF |
GB 7036.1-2009 |
Inner tube of pneumatic tyREs - Part 1: Inner tube of motor vehicle tures 充气轮胎内胎 第1部分:汽车轮胎内胎 |
China National Standards RE |
English PDF |
GB 24788-2009 |
Limit for the REmovable surface powder and water-extractable protein of medical gloves 医用手套表面残余粉末、水抽提蛋白质限量 |
China National Standards RE |
English PDF |
GB 1796.7-2009 |
TyRE valves - Part 7:Components 轮胎气门嘴 第7部分:零部件 |
China National Standards RE |
English PDF |
GB 1796.5-2009 |
TyRE valves - Part 5: Tyre valves for large core chamber 轮胎气门嘴 第5部分:大芯腔气门嘴 |
China National Standards RE |
English PDF |
GB 1796.4-2009 |
TyRE valves - Part 4: Clamp-in valves 轮胎气门嘴 第4部分:压紧式无内胎气门嘴 |
China National Standards RE |
English PDF |
GB 15323-2009 |
Inner tube of aircraft tyREs 航空轮胎内胎 |
China National Standards RE |
English PDF |
GB 13651-2009 |
REtreaded aircraft tyres 航空翻新轮胎 |
China National Standards RE |
English PDF |
GB/T 24762-2009 |
Geometrical product specifications (GPS) - Acceptance test and REverification test for video measuring machine 产品几何技术规范(GPS) 影像测量仪的验收检测和复检检测 |
China National Standards RE |
English PDF |
GB 24806-2009 |
Stairlifts for persons with impaiREd mobility 行动不便人员使用的楼道升降机 |
China National Standards RE |
English PDF |
GB 24805-2009 |
Vertical lifting platforms for persons with impaiREd mobility 行动不便人员使用的垂直升降平台 |
China National Standards RE |
English PDF |
GB 24803.1-2009 |
Safety REquirements for lifts - Part 1: Global essential safety requirements (GESRs) for lifts 电梯安全要求 第1部分:电梯基本安全要求 |
China National Standards RE |
English PDF |
GB/Z 24785-2009 |
Guidance on socio-economic analysis of chemicals-REstrictions 化学品限制的社会经济分析指南 |
China National Standards RE |
English PDF |
GB/Z 24784-2009 |
Safety REgulation for yellow phosphorus 黄磷安全规程 |
China National Standards RE |
English PDF |
GB/Z 24783-2009 |
Safety REgulation for sodium cyanide 氰化钠安全规程 |
China National Standards RE |
English PDF |
GB/T 5972-2009 |
Cranes - WiRE ropes - Care, maintenance, installation, examination and discard 起重机 钢丝绳 保养、维护、安装、检验和报废 |
China National Standards RE |
English PDF |
GB/T 24818.5-2009 |
Cranes - Access,guards and REstraints - Part 5: Bridge and gantry cranes 起重机 通道及安全防护设施 第5部分:桥式和门式起重机 |
China National Standards RE |
English PDF |
GB/T 24818.3-2009 |
Cranes - Access, guards and REstraints - Part 3: Tower cranes 起重机 通道及安全防护设施 第3部分:塔式起重机 |
China National Standards RE |
English PDF |
GB/T 24818.1-2009 |
Cranes - Access, guards and REstraints - Part 1: General 起重机 通道及安全防护设施 第1部分:总则 |
China National Standards RE |
English PDF |
GB/T 24811.2-2009 |
Cranes and lifting appliances - Selection of wiRE ropes - Part 2: Mobile cranes - Coefficient of utilization 起重机和起重机械 钢丝绳选择 第2部分:流动式起重机 利用系数 |
China National Standards RE |
English PDF |
GB/T 24811.1-2009 |
Cranes and lifting appliances - Selection of wiRE ropes - Part 1: General 起重机和起重机械 钢丝绳选择 第1部分:总则 |
China National Standards RE |
English PDF |
GB/T 24809.5-2009 |
Cranes - REquirements for mechanisms - Part 5: Bridge and gantry cranes 起重机 对机构的要求 第5部分:桥式和门式起重机 |
China National Standards RE |
English PDF |
GB/T 24809.4-2009 |
Cranes - REquirements for mechanisms - Part 4: Jib cranes 起重机 对机构的要求 第4部分:臂架起重机 |
China National Standards RE |
English PDF |
GB/T 24809.3-2009 |
Cranes - REquirements for mechanisms - Part 3: Tower cranes 起重机 对机构的要求 第3部分:塔式起重机 |
China National Standards RE |
English PDF |
GB/T 24809.1-2009 |
Cranes - REquirements for mechanisms - Part 1: General 起重机 对机构的要求 第1部分:总则 |
China National Standards RE |
English PDF |
GB/T 24776-2009 |
Grouping and REad-across methods of chemicals 化学物质分组和交叉参照法 |
China National Standards RE |
English PDF |
GB/T 24775-2009 |
ProceduRE of chemical safety assessment 化学品安全评定规程 |
China National Standards RE |
English PDF |
GB/T 24763-2009 |
Steel slag for foamed concREte blocks 泡沫混凝土砌块用钢渣 |
China National Standards RE |
English PDF |
GB/T 9766.7-2009 |
Test method for tyRE valves - Part 7: Components test methods 轮胎气门嘴试验方法 第7部分:零部件试验方法 |
China National Standards RE |
English PDF |
GB/T 9766.5-2009 |
Test method for tyRE valve - Part 5: Tyre valves for large core chamber test methods 轮胎气门嘴试验方法 第5部分:大芯腔气门嘴试验方法 |
China National Standards RE |
English PDF |
GB/T 9766.4-2009 |
Test method for tyRE valve - Part 4: Clamp-in tubeless valves test methods 轮胎气门嘴试验方法 第4部分:压紧式无内胎气门嘴试验方法 |
China National Standards RE |
English PDF |
GB/T 9580-2009 |
Evaluation of standard REference carbon black 标准参比炭黑的鉴定方法 |
China National Standards RE |
English PDF |
GB/T 24799-2009 |
Special tyRE tube 轮胎用特种内胎 |
China National Standards RE |
English PDF |
GB/T 24797.1-2009 |
Film for wrapping rubber bales - Part 1: Butadiene rubber(BR) and styREne-butadiene rubber(SBR) 橡胶包装用薄膜 第1部分:丁二烯橡胶(BR)和苯乙烯-丁二烯橡胶(SBR) |
China National Standards RE |
English PDF |
GB/T 24794-2009 |
Photographic chemicals - MeasuREment methods of the trace elements in the organic compounds - Inductively coupled plasma atomic emission spectrometry (ICP-AES) 照相化学品 有机物中微量元素的分析 电感耦合等离子体原子发射光谱(ICP-AES)法 |
China National Standards RE |
English PDF |
GB/T 24791.3-2009 |
Photography - Sensitometry of scREen/film systems for medical radiography - Part 3: Determination of sensitometric curve shape, speed and average gradient for mammography 摄影 医疗X射线成像用屏/片系统的感光测定 第3部分:乳腺X射线成像感光特性曲线形状、感光度与平均斜率的测定 |
China National Standards RE |
English PDF |
GB/T 24791.1-2009 |
Photography - Sensitometry of scREen/film systems for medical X-radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient 摄影 医疗X射线成像用屏/片系统的感光测定 第1部分:感光特性曲线形状、感光度与平均斜率的测定 |
China National Standards RE |
English PDF |
GB/T 24825-2009 |
DC or AC supplied electronic control gear for LED modules - Performance REquirements LED模块用直流或交流电子控制装置 性能要求 |
China National Standards RE |
English PDF |
GB/T 24824-2009 |
MeasuREment methods of LED modules for general lighting 普通照明用LED模块测试方法 |
China National Standards RE |
English PDF |
GB/T 24823-2009 |
LED-modules for general lighting - Performance REquirements 普通照明用LED模块 性能要求 |
China National Standards RE |
English PDF |
GB/T 13171.2-2009 |
Laundry powders (Phosphate fREe) 洗衣粉(无磷型) |
China National Standards RE |
English PDF |
GB/T 24610.4-2009 |
Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical boRE and outside surface 滚动轴承 振动测量方法 第4部分:具有圆柱孔和圆柱外表面的圆柱滚子轴承 |
China National Standards RE |
English PDF |
GB/T 4459.9-2009 |
Mechanical drawings - Seals for dynamic application - Part 2: Detailed simplified REpresentation 机械制图 动密封圈 第2部分:特征简化表示法 |
China National Standards RE |
English PDF |
GB/T 4459.8-2009 |
Mechanical drawings - Seals for dynamic application - Part 1: General simplified REpresentation 机械制图 动密封圈 第1部分:通用简化表示法 |
China National Standards RE |
English PDF |
GB/T 24746-2009 |
Technical drawings - Symbolic pREsentation and indication of adhesive, fold and pressed joints 技术制图 粘接、弯折与挤压接合的图形符号表示法 |
China National Standards RE |
English PDF |
GB/T 24743-2009 |
Technical product documentation - Heat tREated ferrous parts presentation and indications 技术产品文件 钢铁零件热处理表示法 |
China National Standards RE |
English PDF |
GB/T 24741.2-2009 |
Technical drawings - Simplified REpresentation of the assembly of parts with fasteners - Prat 2: Rivets for aerospace equipment 技术制图 紧固组合的简化表示法 第2部分:航空航天设备用铆钉 |
China National Standards RE |
English PDF |
GB/T 24741.1-2009 |
Technical drawings - Simplified REpresentation of the assembly of parts with fasteners - Part 1: General principles 技术制图 紧固组合的简化表示法 第1部分:一般原则 |
China National Standards RE |
English PDF |
GB/T 24740-2009 |
Technical product documentation - Symbol of mechanical manufactuRE orientation and clamping 技术产品文件 机械加工定位、夹紧符号表示法 |
China National Standards RE |
English PDF |
GB/T 24739-2009 |
Mechanical drawings - REpresentation for declining component of mechanical parts 机械制图 机件上倾斜结构的表示法 |
China National Standards RE |
English PDF |
GB/T 24737.5-2009 |
Guide for technological management - Part 5: Design of process proceduRE 工艺管理导则 第5部分:工艺规程设计 |
China National Standards RE |
English PDF |
GB/T 24737.3-2009 |
Guide for technological management - Part 3: REview of technological efficiency of product design 工艺管理导则 第3部分:产品结构工艺性审查 |
China National Standards RE |
English PDF |
GB/T 24736.3-2009 |
Management guide for tooling design - Part 3: ProceduRE for tooling design 工艺装备设计管理导则 第3部分:工艺装备设计程序 |
China National Standards RE |
English PDF |
GB/T 24734.8-2009 |
Technical product documentation - Digital product definition data practices - Part 8: REquirements for model values and dimensions 技术产品文件 数字化产品定义数据通则 第8部分:模型数值与尺寸要求 |
China National Standards RE |
English PDF |
GB/T 24734.7-2009 |
Technical product documentation - Digital product definition data practices - Part 7: REquirements for notes and special notations 技术产品文件 数字化产品定义数据通则 第7部分:注释要求 |
China National Standards RE |
English PDF |
GB/T 24734.6-2009 |
Technical product documentation - Digital product definition data practices - Part 6: FeatuRE specification for geometrical modeling 技术产品文件 数字化产品定义数据通则 第6部分:几何建模特征规范 |
China National Standards RE |
English PDF |
GB/T 24734.5-2009 |
Technical product documentation - Digital product definition data practices - Part 5: Common REquirements for product definition data 技术产品文件 数字化产品定义数据通则 第5部分:产品定义数据通用要求 |
China National Standards RE |
English PDF |
GB/T 24734.4-2009 |
Technical product documentation - Digital product definition data practices - Part 4: REquirements for design model 技术产品文件 数字化产品定义数据通则 第4部分:设计模型要求 |
China National Standards RE |
English PDF |
GB/T 24734.3-2009 |
Technical product documentation - Digital product definition data practices - Part 3: REquirements for data set 技术产品文件 数字化产品定义数据通则 第3部分:数据集要求 |
China National Standards RE |
English PDF |
GB/T 24733-2009 |
AustempeREd ductile iron(ADI) castings 等温淬火球墨铸铁件 |
China National Standards RE |
English PDF |
GB/T 10609.4-2009 |
Technical drawings - REquirements for microcopying 技术制图 对缩微复制原件的要求 |
China National Standards RE |
English PDF |
GB/T 24713.2-2009 |
Aircraft - Tow bar attachment fittings interface REquirements - Part 2: Regional aircraft 飞机 牵引杆连接件接口要求 第2部分:支线飞机 |
China National Standards RE |
English PDF |
GB/T 24713.1-2009 |
Aircraft - Tow bar attachment fittings interface REquirements - Part 1: Main line aircraft 飞机 牵引杆连接件接口要求 第1部分:干线飞机 |
China National Standards RE |
English PDF |
GB/T 24732-2009 |
General technical conditions for support (compREssion) sheave of passenger ropeway 客运索道托(压)索轮通用技术条件 |
China National Standards RE |
English PDF |
GB/Z 24847-2009 |
Technical guide on 1000kV AC system voltage and REactive power 1000kV交流系统电压和无功电力技术导则 |
China National Standards RE |
English PDF |
GB/Z 24846-2009 |
PREventive test standards of 1000kV AC electrical equipments 1000kV交流电气设备预防性试验规程 |
China National Standards RE |
English PDF |
GB/Z 24845-2009 |
Specification of metal-oxide surge arREsters without gaps for 1000kV ac system 1000kV交流系统用无间隙金属氧化物避雷器技术规范 |
China National Standards RE |
English PDF |
Find out:25312Items | To Page of: First -Previous-Next -Last | [154] [155] [156] [157] [158] [159] [160] |